The Switch,rotary, cataloged under National Stock Number 5930-00-930-4233, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Us Army Aviation and Missile Command. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-00-930-4233 |
| Primary Part Number | 10210534 |
| Item Name | Switch,rotary |
| FSC / FSG | 5930 / 59 — Switches |
| Manufacturer | Us Army Aviation and Missile Command |
| Status | ACTIVE |
| Shaft Type | ROUND, FLATTED SINGLE ACTUATOR |
| Shaft Diameter | 0.250 INCHES NOMINAL SINGLE ACTUATOR IN |
| Switch Contact Basic Design | NONPILE-UP SYMMETRICAL |
| Nonturn Device Radius | 0.375 INCHES NOMINAL AT 3:00 OCLOCK IN |
| Terminal Type | TAB, SOLDER LUG |
| Overall Diameter | 1.100 INCHES MINIMUM AND 1.306 INCHES MAXIMUM IN |
| First Flat Length | 0.250 INCHES NOMINAL SINGLE ACTUATOR IN |
| Detent Rotational Torque Range | +0.500 TO 2.500 INCH-POUNDS SINGLE ACTUATOR IN |
| Rotor Through Connection Quantity | 1 SINGLE SECTION |
| Contact Load Current Rating | 5.0 AMPERES RESISTIVE LOAD AND 2.5 AMPERES INDUCTIVE LOAD AC AT SEA LEVEL |
| Mounting Method | THREADED BUSHING SINGLE MOUNTING FACILITY |
| Thread Length | 0.410 INCHES NOMINAL SINGLE MOUNTING FACILITY IN |
| Pole Quantity | 1 SINGLE SECTION FRONT |
| Style Designator | TAP, CIRCULAR, BUSHING MOUNT |
| Individual Section Quantity | 1 |
| Nonturn Device Type | TAB AT 3:00 OCLOCK |
| Nominal Thread Size | 0.375 INCHES SINGLE MOUNTING FACILITY IN |
| Shaft Length | 0.400 INCHES NOMINAL SINGLE ACTUATOR IN |
| Switch Actuator Stop Device Type | FIXED STOP SINGLE ACTUATOR |
| Contact Switching Action | BREAKS BEFORE MAKES SINGLE SECTION REAR |
| Contact Voltage Rating in Volts | 115.0 AC AT SEA LEVEL |
| Operating Temp Range | -65.0 TO 125.0 CELSIUS DEGC |
| Thread Class | 2A SINGLE MOUNTING FACILITY A |
| Test Data Document | 81349-MIL-S-3786/4 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Switch Actuator Positioning Increment | 45.0 DEGREES SINGLE ACTUATOR |
| Switch Actuator Indexing Position Quantity | 8 SINGLE ACTUATOR |
| Thread Series Designator | UNEF SINGLE MOUNTING FACILITY |
| Shaft Flat/slot Angular Location | 195.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| Flat Height | 0.219 INCHES NOMINAL SINGLE ACTUATOR IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 10210534 PRIMARY | Us Army Aviation and Missile Command (USA) |
| Reference | Meaning |
|---|---|
| 10210534 | 5/2 Secondary reference U.S. Government activity |
NSN 5930-00-930-4233 is a Switch,rotary, manufactured by Us Army Aviation and Missile Command, classified under FSC 5930, Switches. Status: active.
NSN 5930-00-930-4233 has 1 manufacturer part number on file: 10210534 (Us Army Aviation and Missile Command).
1 possible match (shared part number, not a government interchangeability claim): 5930-01-023-3842. Verify interchangeability with system specifications before substitution.
Key specifications for 10210534: Shaft Type: ROUND, FLATTED SINGLE ACTUATOR; Shaft Diameter: 0.250 INCHES NOMINAL SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL; Nonturn Device Radius: 0.375 INCHES NOMINAL AT 3:00 OCLOCK IN. 29 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.