PartsTable TECHNICAL DATA SHEET
NSN 5930-00-823-0759Government record, cited

Switch, Rotary5930-00-823-0759

NSN 5930-00-823-0759 · NIIN 008230759 · Part number 1830-5909
Cole Instrument Corp. Dba Cole Instruments · FSC 5930 — Switches · FSG 59 — Electrical and Electronic Equipment Components · CAGE 31946
Government record, cited
NSN 5930-00-823-0759 — this item is cataloged by the U.S. Government under National Stock Number 5930-00-823-0759. Manufacturer of record part number: 1830-5909.
Also searched as  5930-00-823-0759 · 5930008230759 · NIIN 008230759 · 00-823-0759 · FSC 5930 Switches · CAGE 31946 · 1830-5909 · CM27683 · 821019 · 41-175-0007 · SM-D-414835
Nearby stock numbers  ·
Features
  • Switch,rotary — FSC 5930
  • Shaft Type: ROUND, PARALLEL FLATTED, THREADED HOLE SINGLE ACTUATOR
  • Shaft Diameter: 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR IN
  • Switch Contact Basic Design: NONPILE-UP SYMMETRICAL
  • Terminal Type: TAB, SOLDER LUG
  • Overall Diameter: 0.750 INCHES NOMINAL IN
  • First Flat Length: 0.281 INCHES MINIMUM SINGLE ACTUATOR IN
  • Precious Material: SILVER
Identification
  • NSN: 5930-00-823-0759
  • NIIN: 008230759
  • FSC: 5930 — Switches
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 1830-5909
  • Manufacturer: Cole Instrument Corp. Dba Cole Instruments
General Description

The Switch,rotary, cataloged under National Stock Number 5930-00-823-0759, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Cole Instrument Corp. Dba Cole Instruments. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 3 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5930-00-823-0759
Primary Part Number1830-5909
Item NameSwitch,rotary
FSC / FSG5930 / 59 — Switches
ManufacturerCole Instrument Corp. Dba Cole Instruments
StatusACTIVE
Shaft TypeROUND, PARALLEL FLATTED, THREADED HOLE SINGLE ACTUATOR
Shaft Diameter0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR IN
Switch Contact Basic DesignNONPILE-UP SYMMETRICAL
Terminal TypeTAB, SOLDER LUG
Overall Diameter0.750 INCHES NOMINAL IN
First Flat Length0.281 INCHES MINIMUM SINGLE ACTUATOR IN
Precious MaterialSILVER
Contact Load Current Rating500.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL
Contact Load Current Rating1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL
Mounting MethodTHREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY
Thread Length0.406 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN
Pole Quantity1 SINGLE SECTION REAR
Style DesignatorSNAP OR LINE
Individual Section Quantity1
Nonturn Device TypeFLATTED BUSHING AT 12:00 OCLOCK
Nominal Thread Size0.375 INCHES SINGLE MOUNTING FACILITY IN
Shaft Length0.375 INCHES NOMINAL SINGLE ACTUATOR IN
Switch Actuator Stop Device TypeFIXED STOP SINGLE ACTUATOR
Width Between Flats0.188 INCHES MINIMUM AND 0.189 INCHES MAXIMUM SINGLE ACTUATOR IN
Contact Switching ActionBREAKS BEFORE MAKES SINGLE SECTION REAR
Contact Voltage Rating in Volts28.0 DC AT SEA LEVEL
Contact Voltage Rating in Volts110.0 AC AT SEA LEVEL
Precious Material and LocationCONTACT SURFACES SILVER
Operating Temp Range-40.0 TO 85.0 CELSIUS DEGC
Thread Class2A SINGLE MOUNTING FACILITY A
Switch Actuator Positioning Increment30.0 DEGREES SINGLE ACTUATOR
Switch Actuator Indexing Position Quantity2 SINGLE ACTUATOR
Thread Series DesignatorUNEF SINGLE MOUNTING FACILITY
Shaft Flat/slot Angular Location165.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
⇄ Related Items 3
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5331-01-416-5514821019 POSSIBLE MATCH
O-RING
Possible match (shared part number)Survival Systems International, Inc
1005-01-472-808182101-9 POSSIBLE MATCH
BOLT,BREECH
Possible match (shared part number)Barrett Firearms Manufacturing, Inc. Dba Barrett Firearms Manufacturing Inc
3120-01-517-977782-1019 POSSIBLE MATCH
BEARING,WASHER,THRUST
Possible match (shared part number)Pierce Manufacturing Inc
Cross-Reference Index
Part NumberManufacturer
1830-5909 Cole Instrument Corp. Dba Cole Instruments (USA)
Reference documents
ReferenceMeaning
CM27683 5/9 Secondary reference
Clarostat Sensors and Controls
821019 5/9 Secondary reference
U.S. Government activity
41-175-0007 5/9 Secondary reference
Illinois Tool Works Inc Dba Illinois Tool Works Inc Div Illinois Tool Works
SM-D-414835 3/2 Design control — primary reference
U.S. Government activity
5930008230759 6/9 Informative reference only
E.c.a Etablissement Central Des Approvisionnements Des Forces Armees Royales
Related Parts
5331-01-416-5514POSSIBLE MATCH
O-RING
821019
1005-01-472-8081POSSIBLE MATCH
BOLT,BREECH
82101-9
3120-01-517-9777POSSIBLE MATCH
BEARING,WASHER,THRUST
82-1019

Frequently Asked Questions

What is NSN 5930-00-823-0759?

NSN 5930-00-823-0759 is a Switch,rotary, manufactured by Cole Instrument Corp. Dba Cole Instruments, classified under FSC 5930, Switches. Status: active.

What part numbers are listed for NSN 5930-00-823-0759?

NSN 5930-00-823-0759 has 1 manufacturer part number on file: 1830-5909 (Cole Instrument Corp. Dba Cole Instruments).

What NSN replaces 5930-00-823-0759?

3 possible matches (shared part number, not a government interchangeability claim): 5331-01-416-5514, 1005-01-472-8081, 3120-01-517-9777. Verify interchangeability with system specifications before substitution.

What are the specifications of 1830-5909?

Key specifications for 1830-5909: Shaft Type: ROUND, PARALLEL FLATTED, THREADED HOLE SINGLE ACTUATOR; Shaft Diameter: 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL; Terminal Type: TAB, SOLDER LUG. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5930-00-823-0759 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com