PartsTable TECHNICAL DATA SHEET
NSN 5930-00-774-3778Government record, cited

Switch, Rotary5930-00-774-3778

NSN 5930-00-774-3778 · NIIN 007743778 · Part number 10778-1
Drs Technologies Canada Ltd · FSC 5930 — Switches · FSG 59 — Electrical and Electronic Equipment Components · CAGE 38200
Government record, cited
NSN 5930-00-774-3778 — this item is cataloged by the U.S. Government under National Stock Number 5930-00-774-3778. Manufacturer of record part number: 10778-1.
Also searched as  5930-00-774-3778 · 5930007743778 · NIIN 007743778 · 00-774-3778 · FSC 5930 Switches · CAGE 38200 · 10778-1 · 44YY23857
Nearby stock numbers  ·
Features
  • Switch,rotary — FSC 5930
  • Shaft Type: ROUND, FLATTED SINGLE ACTUATOR
  • Shaft Diameter: 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN
  • Switch Contact Basic Design: NONPILE-UP SYMMETRICAL AND NONPILE-UP NONSYMMETRICAL
  • Nonturn Device Radius: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM AT 3:00 OCLOCK IN
  • Terminal Type: TAB, SOLDER LUG
  • Overall Diameter: 1.254 INCHES MINIMUM AND 1.314 INCHES MAXIMUM IN
  • First Flat Length: 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM SINGLE ACTUATOR IN
Identification
  • NSN: 5930-00-774-3778
  • NIIN: 007743778
  • FSC: 5930 — Switches
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 10778-1
  • Manufacturer: Drs Technologies Canada Ltd
General Description

The Switch,rotary, cataloged under National Stock Number 5930-00-774-3778, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Drs Technologies Canada Ltd. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 4 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5930-00-774-3778
Primary Part Number10778-1
Item NameSwitch,rotary
FSC / FSG5930 / 59 — Switches
ManufacturerDrs Technologies Canada Ltd
StatusACTIVE
Shaft TypeROUND, FLATTED SINGLE ACTUATOR
Shaft Diameter0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN
Switch Contact Basic DesignNONPILE-UP SYMMETRICAL AND NONPILE-UP NONSYMMETRICAL
Nonturn Device Radius0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM AT 3:00 OCLOCK IN
Terminal TypeTAB, SOLDER LUG
Overall Diameter1.254 INCHES MINIMUM AND 1.314 INCHES MAXIMUM IN
First Flat Length0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM SINGLE ACTUATOR IN
Rotor Through Connection Quantity1 EACH SECTION
Contact Load Current Rating2.0 AMPERES RESISTIVE LOAD AND 1.0 AMPERES INDUCTIVE LOAD AC AT SEA LEVEL
Contact Load Current Rating1.0 AMPERES INDUCTIVE LOAD DC AT SEA LEVEL
Mounting MethodTHREADED BUSHING SINGLE MOUNTING FACILITY
Thread Length0.417 INCHES MINIMUM AND 0.457 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN
Pole Quantity1 EACH SECTION FRONT
Style DesignatorTAP, CIRCULAR, BUSHING MOUNT
Individual Section Quantity4
Nonturn Device TypeTAB AT 3:00 OCLOCK
Nominal Thread Size0.375 INCHES SINGLE MOUNTING FACILITY IN
Shaft Length0.834 INCHES MINIMUM AND 0.914 INCHES MAXIMUM SINGLE ACTUATOR IN
Contact Switching ActionBREAKS BEFORE MAKES FIRST SECTION REAR
Contact Switching ActionBREAKS BEFORE MAKES THIRD SECTION REAR
Contact Voltage Rating in Volts115.0 AC AT SEA LEVEL
Contact Voltage Rating in Volts28.0 DC AT SEA LEVEL
Operating Temp Range-65.0 TO 125.0 CELSIUS DEGC
Thread Class2A SINGLE MOUNTING FACILITY A
Test Data Document81349-MIL-S-3786/4 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Switch Actuator Positioning Increment30.0 DEGREES SINGLE ACTUATOR
Switch Actuator Indexing Position Quantity12 SINGLE ACTUATOR
Thread Series DesignatorUNEF SINGLE MOUNTING FACILITY
Shaft Flat/slot Angular Location180.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
⇄ Related Items 4
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
4720-00-908-7179107781 POSSIBLE MATCH
HOSE ASSEMBLY,NONMETALLIC
Possible match (shared part number)Hyster-Yale Group, Inc. Div Hyster-Yale Materials Handling
5331-01-276-4825 POSSIBLE MATCH
O-RING
Possible match (shared part number)
5305-01-551-1679 POSSIBLE MATCH
SCREW,CAP,HEXAGON HEAD
Possible match (shared part number)
5998-01-642-0796107.78-1 POSSIBLE MATCH
ELECTRONIC COMPONENTS ASSEMBLY
Possible match (shared part number)Rockwell Automation, Inc. Dba Rockwell Automation
Cross-Reference Index
Part NumberManufacturer
10778-1 PRIMARY Drs Technologies Canada Ltd (CAN)
Reference documents
ReferenceMeaning
44YY23857 5/2 Secondary reference
U.S. Government activity
10778-1 3/9 Design control — primary reference
Drs Technologies Canada Ltd
Related Parts
4720-00-908-7179POSSIBLE MATCH
HOSE ASSEMBLY,NONMETALLIC
107781
5331-01-276-4825POSSIBLE MATCH
O-RING
5305-01-551-1679POSSIBLE MATCH
SCREW,CAP,HEXAGON HEAD
5998-01-642-0796POSSIBLE MATCH
ELECTRONIC COMPONENTS ASSEMBLY
107.78-1

Frequently Asked Questions

What is NSN 5930-00-774-3778?

NSN 5930-00-774-3778 is a Switch,rotary, manufactured by Drs Technologies Canada Ltd, classified under FSC 5930, Switches. Status: active.

What part numbers are listed for NSN 5930-00-774-3778?

NSN 5930-00-774-3778 has 1 manufacturer part number on file: 10778-1 (Drs Technologies Canada Ltd).

What NSN replaces 5930-00-774-3778?

4 possible matches (shared part number, not a government interchangeability claim): 4720-00-908-7179, 5331-01-276-4825, 5305-01-551-1679. Verify interchangeability with system specifications before substitution.

What are the specifications of 10778-1?

Key specifications for 10778-1: Shaft Type: ROUND, FLATTED SINGLE ACTUATOR; Shaft Diameter: 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL AND NONPILE-UP NONSYMMETRICAL; Nonturn Device Radius: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM AT 3:00 OCLOCK IN. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5930-00-774-3778 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com