PartsTable TECHNICAL DATA SHEET
NSN 5930-00-766-7611Government record, cited

Switch, Rotary5930-00-766-7611

NSN 5930-00-766-7611 · NIIN 007667611 · Part number 1980417-18
Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier · FSC 5930 — Switches · FSG 59 — Electrical and Electronic Equipment Components · CAGE 10001
Government record, cited
NSN 5930-00-766-7611 — this item is cataloged by the U.S. Government under National Stock Number 5930-00-766-7611. Manufacturer of record part number: 1980417-18.
Also searched as  5930-00-766-7611 · 5930007667611 · NIIN 007667611 · 00-766-7611 · FSC 5930 Switches · CAGE 10001 · 1980417-18 · 24003-4
Nearby stock numbers  ·
Features
  • Switch,rotary — FSC 5930
  • Shaft Type: ROUND, FLATTED SINGLE ACTUATOR
  • Shaft Diameter: 0.250 INCHES NOMINAL SINGLE ACTUATOR IN
  • Switch Contact Basic Design: NONPILE-UP SYMMETRICAL
  • Terminal Type: TAB, SOLDER LUG
  • Overall Diameter: 1.000 INCHES NOMINAL IN
  • First Flat Length: 0.250 INCHES NOMINAL SINGLE ACTUATOR IN
  • Precious Material: SILVER
Identification
  • NSN: 5930-00-766-7611
  • NIIN: 007667611
  • FSC: 5930 — Switches
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 1980417-18
  • Manufacturer: Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier
General Description

The Switch,rotary, cataloged under National Stock Number 5930-00-766-7611, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 4 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5930-00-766-7611
Primary Part Number1980417-18
Item NameSwitch,rotary
FSC / FSG5930 / 59 — Switches
ManufacturerNavair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier
StatusACTIVE
Shaft TypeROUND, FLATTED SINGLE ACTUATOR
Shaft Diameter0.250 INCHES NOMINAL SINGLE ACTUATOR IN
Switch Contact Basic DesignNONPILE-UP SYMMETRICAL
Terminal TypeTAB, SOLDER LUG
Overall Diameter1.000 INCHES NOMINAL IN
First Flat Length0.250 INCHES NOMINAL SINGLE ACTUATOR IN
Precious MaterialSILVER
Contact Load Current Rating250.0 MILLIAMPERES INDUCTIVE LOAD AND 1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
Contact Load Current Rating100.0 MILLIAMPERES INDUCTIVE LOAD AND 1.0 AMPERES RESISTIVE LOAD LOWEST DC VOLTAGE RATING AT SEA LEVEL
Contact Load Current Rating20.0 MILLIAMPERES INDUCTIVE LOAD AND 100.0 MILLIAMPERES RESISTIVE LOAD HIGHEST DC VOLTAGE RATING AT SEA LEVEL
Mounting MethodTHREADED BUSHING SINGLE MOUNTING FACILITY
Thread Length0.250 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
Pole Quantity1 EACH SECTION FRONT
Style DesignatorTAP, CIRCULAR, BUSHING MOUNT
Individual Section Quantity3
Nominal Thread Size0.375 INCHES SINGLE MOUNTING FACILITY IN
Shaft Length0.310 INCHES NOMINAL SINGLE ACTUATOR IN
Switch Actuator Stop Device TypeFIXED STOP SINGLE ACTUATOR
Contact Switching ActionBREAKS BEFORE MAKES EACH SECTION REAR
Contact Switching ActionBREAKS BEFORE MAKES EACH SECTION FRONT
Contact Voltage Rating in Volts115.0 HIGHEST DC VOLTAGE RATING AT SEA LEVEL
Contact Voltage Rating in Volts115.0 AC AT SEA LEVEL
Contact Voltage Rating in Volts6.0 LOWEST DC VOLTAGE RATING AT SEA LEVEL
Precious Material and LocationROTOR AND CONTACT SURFACES SILVER
Thread Class2A SINGLE MOUNTING FACILITY A
Switch Actuator Positioning Increment36.0 DEGREES SINGLE ACTUATOR
Thread Quantity Per Inch32 SINGLE MOUNTING FACILITY
Switch Actuator Indexing Position Quantity4 SINGLE ACTUATOR
Thread Series DesignatorUNS SINGLE MOUNTING FACILITY
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
⇄ Related Items 4
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5930-00-823-7797 POSSIBLE MATCH
SWITCH,DRIVER UNIT
Possible match (shared part number)
5950-01-150-550324-0034 POSSIBLE MATCH
TRANSFORMER,POWER
Possible match (shared part number)Curtiss-Wright Controls Electronic Systems, Inc.
3940-01-573-6482240034 POSSIBLE MATCH
SLING,DRUM LIFTING
Possible match (shared part number)Wesco Aircraft Hardware Corp. Dba Incora
4810-01-645-837724003-4 POSSIBLE MATCH
ACTUATOR,ELECTRO-MECHANICAL,LINE
Possible match (shared part number)Morpac Industries, Inc Div Actuator
Cross-Reference Index
Part NumberManufacturer
1980417-18 PRIMARY Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier (USA)
Reference documents
ReferenceMeaning
24003-4 5/9 Secondary reference
U.S. Government activity
Related Parts
5930-00-823-7797POSSIBLE MATCH
SWITCH,DRIVER UNIT
5950-01-150-5503POSSIBLE MATCH
TRANSFORMER,POWER
24-0034
3940-01-573-6482POSSIBLE MATCH
SLING,DRUM LIFTING
240034
4810-01-645-8377POSSIBLE MATCH
ACTUATOR,ELECTRO-MECHANICAL,LINE
24003-4

Frequently Asked Questions

What is NSN 5930-00-766-7611?

NSN 5930-00-766-7611 is a Switch,rotary, manufactured by Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier, classified under FSC 5930, Switches. Status: active.

What part numbers are listed for NSN 5930-00-766-7611?

NSN 5930-00-766-7611 has 1 manufacturer part number on file: 1980417-18 (Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier).

What NSN replaces 5930-00-766-7611?

4 possible matches (shared part number, not a government interchangeability claim): 5930-00-823-7797, 5950-01-150-5503, 3940-01-573-6482. Verify interchangeability with system specifications before substitution.

What are the specifications of 1980417-18?

Key specifications for 1980417-18: Shaft Type: ROUND, FLATTED SINGLE ACTUATOR; Shaft Diameter: 0.250 INCHES NOMINAL SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL; Terminal Type: TAB, SOLDER LUG. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5930-00-766-7611 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com