The Switch,pressure, cataloged under National Stock Number 5930-00-621-9953, is classified within Federal Supply Class 5930 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 23 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-00-621-9953 |
| Primary Part Number | M9395/10-DR1FA |
| Item Name | Switch,pressure |
| FSC / FSG | 5930 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Unthreaded Mounting Hole Diameter | 0.219 INCHES NOMINAL IN |
| Contact Adjustability | DEACTUATION POINT NOT ADJUSTABLE AND ACTUATION POINT NOT ADJUSTABLE |
| Contact Voltage Rating in Volts | 28.0 DC AT SEA LEVEL SINGLE VOLTAGE |
| Style Designator | CYLINDRICAL W/MOUNTING LUGS |
| Mounting Facility Pattern | TWO POSITION IN-LINE |
| Body Length | 1.162 INCHES MAXIMUM IN |
| Specification/standard Data | 81349-MIL-S-9395/10 GOVERNMENT SPECIFICATION |
| Sensing Element Burst Pressure | 1200.00 POUNDS PER SQUARE INCH LBS |
| Contact Stimulus Rating | 150.00 ACTUATION POINT NOMINAL POUNDS PER SQUARE INCH AND 50.00 DEACTUATION POINT NOMINAL POUNDS PER SQUARE INCH |
| Test Data Document | 81349-MIL-S-9395 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Pressure Connector Type | GROOVED, UNTHREADED EXTERNAL SINGLE CONNECTION |
| Nonpile-Up Contact Arrangement | 1 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION |
| Terminal Type | CONNECTOR, RECEPTACLE |
| Operating Temp Rating | -53.9 CELSIUS MINIMUM AND 176.6 CELSIUS MAXIMUM DEGC |
| Mounting Method | UNTHREADED HOLE(S) |
| Contact Action Stimulus | INCREASE |
| Contact Load Current Rating | 10.0 AMPERES RESISTIVE LOAD AND 10.0 AMPERES INDUCTIVE LOAD AND 5.0 AMPERES LAMP LOAD SINGLE VOLTAGE |
| Distance Between Mounting Facility Centers | 1.521 INCHES MINIMUM AND 1.541 INCHES MAXIMUM IN |
| Body Diameter | 0.994 INCHES MINIMUM AND 0.996 INCHES MAXIMUM IN |
| Outside Diameter | 0.431 INCHES MINIMUM AND 0.433 INCHES MAXIMUM SINGLE CONNECTION IN |
| Pressure Switch Type | GAGE |
| Media for Which Designed | LIQUID |
| Proof Pressure | 800.00 POUNDS PER SQUARE INCH LBS |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| M9395/10-DR1FA | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-S-9395/10 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| M9395/10-02 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-DTL-9395/10 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5930-00-621-9953 is a Switch,pressure, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5930 (No Item Name Available). Status: active.
NSN 5930-00-621-9953 has 4 cross-referenced part numbers: M9395/10-DR1FA (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-S-9395/10 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), M9395/10-02 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-DTL-9395/10 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There is 1 known substitute for 5930-00-621-9953: 5930-00-173-9890. Verify interchangeability with system specifications before substitution.
Key specifications for M9395/10-DR1FA: Unthreaded Mounting Hole Diameter: 0.219 INCHES NOMINAL IN; Contact Adjustability: DEACTUATION POINT NOT ADJUSTABLE AND ACTUATION POINT NOT ADJUSTABLE; Contact Voltage Rating in Volts: 28.0 DC AT SEA LEVEL SINGLE VOLTAGE; Style Designator: CYLINDRICAL W/MOUNTING LUGS. 25 total characteristics are documented in the Federal Logistics Information System.