The Boot,dust and Moisture Seal, cataloged under National Stock Number 5930-00-578-2524, is classified within Federal Supply Class 5930 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Apm Hexseal Corp. Government technical data includes 16 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 6 commercial cross-references from 6 manufacturers, enabling identification through both NSN and commercial part number lookups. 6 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5930-00-578-2524 |
| Primary Part Number | 1N1030 |
| Item Name | Boot,dust and Moisture Seal |
| FSC / FSG | 5930 / 59 — No Item Name Available |
| Manufacturer | Apm Hexseal Corp |
| Status | CANCELLED |
| Material | RUBBER SILICONE BODY |
| Style Designator | CLOSED END |
| Mounting Method | INTEGRAL THREADED NUT |
| Base Thread Location | INTERNAL |
| Width Across Flats | 0.625 INCHES NOMINAL IN |
| Opening Inside Diameter | 0.125 INCHES NOMINAL IN |
| Nominal Thread Size | 0.469 INCHES IN |
| Thread Series | WHITWORTH |
| Test Data Document | 81349-MILB5423-1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material Document and Classification | ZZ-R-765,CL 1A,GR 50 FED SPEC SINGLE MATERIAL RESPONSE BODY A |
| Sealing Method | COMPRESSION |
| Dome Height | 0.791 INCHES NOMINAL IN |
| Mounting Device Quantity | 1 |
| Hazardous Locations/environmental Protection | DUSTPROOF-NEMA TYPE 13 AND WATERTIGHT-NEMA TYPE 4 |
| Thread Length | 0.176 INCHES NOMINAL IN |
| Material Thickness | 0.053 INCHES NOMINAL IN |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 1711-6450 | Lockheed Martin Corp Lockheed Martin Mission Systems (USA) |
| MILB5423-1 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| B7441736P1 | General Electric Co General Purpose Control Dept (USA) |
| 9147C5044-2 | Lockheed Corp Lockheed Electronics Co Inc (USA) |
| 1N1030 PRIMARY | Apm Hexseal Corp (USA) |
| 9147C5044-2 | Bae Systems Information and Electronic Systems Integration Inc. Dba Bae Systems (USA) |
NSN 5930-00-578-2524 is a Boot,dust and Moisture Seal, manufactured by Apm Hexseal Corp, classified under FSC 5930 (No Item Name Available). Status: cancelled.
NSN 5930-00-578-2524 has 6 cross-referenced part numbers: 1711-6450 (Lockheed Martin Corp Lockheed Martin Mission Systems), MILB5423-1 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), B7441736P1 (General Electric Co General Purpose Control Dept), 9147C5044-2 (Lockheed Corp Lockheed Electronics Co Inc), 1N1030 (Apm Hexseal Corp) and 1 more.
There are 6 known substitutes for 5930-00-578-2524: 5930-00-491-0643, 5930-00-644-0109, 5930-00-644-0110 and 3 more. Verify interchangeability with system specifications before substitution.
Key specifications for 1N1030: Material: RUBBER SILICONE BODY; Style Designator: CLOSED END; Mounting Method: INTEGRAL THREADED NUT; Base Thread Location: INTERNAL. 17 total characteristics are documented in the Federal Logistics Information System.
NSN 5930-00-578-2524 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.