PartsTable TECHNICAL DATA SHEET
NSN 5930-00-491-6355Government record, cited

Switch, Rotary5930-00-491-6355

NSN 5930-00-491-6355 · NIIN 004916355 · Part number 10669497-003
Us Army Aviation and Missile Command · FSC 5930 — Switches · FSG 59 — Electrical and Electronic Equipment Components · CAGE 18876
Government record, cited
NSN 5930-00-491-6355 — this item is cataloged by the U.S. Government under National Stock Number 5930-00-491-6355. Manufacturer of record part number: 10669497-003.
Also searched as  5930-00-491-6355 · 5930004916355 · NIIN 004916355 · 00-491-6355 · FSC 5930 Switches · CAGE 18876 · 10669497-003 · 800.7645-C · 11394-2 · C-7645-C · 11394-2
Nearby stock numbers  ·
Features
  • Switch,rotary — FSC 5930
  • Shaft Type: ROUND, FLATTED SINGLE ACTUATOR
  • Shaft Diameter: 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN
  • Switch Contact Basic Design: NONPILE-UP SYMMETRICAL
  • Terminal Type: TURRET
  • Mounting Facility Pattern: TWO POSITION IN-LINE SINGLE MOUNTING FACILITY
  • First Flat Length: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM SINGLE ACTUATOR IN
  • Detent Rotational Torque Range: +2.000 TO 11.000 INCH-POUNDS SINGLE ACTUATOR IN
Identification
  • NSN: 5930-00-491-6355
  • NIIN: 004916355
  • FSC: 5930 — Switches
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 10669497-003
  • Manufacturer: Us Army Aviation and Missile Command
General Description

The Switch,rotary, cataloged under National Stock Number 5930-00-491-6355, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Us Army Aviation and Missile Command. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5930-00-491-6355
Primary Part Number10669497-003
Item NameSwitch,rotary
FSC / FSG5930 / 59 — Switches
ManufacturerUs Army Aviation and Missile Command
StatusACTIVE
Shaft TypeROUND, FLATTED SINGLE ACTUATOR
Shaft Diameter0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN
Switch Contact Basic DesignNONPILE-UP SYMMETRICAL
Terminal TypeTURRET
Mounting Facility PatternTWO POSITION IN-LINE SINGLE MOUNTING FACILITY
First Flat Length0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM SINGLE ACTUATOR IN
Detent Rotational Torque Range+2.000 TO 11.000 INCH-POUNDS SINGLE ACTUATOR IN
Contact Load Current Rating1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
Contact Load Current Rating1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL
Mounting MethodTHREADED HOLE(S) SINGLE MOUNTING FACILITY
Pole Quantity1 EACH SECTION REAR
Style DesignatorTAP, SQUARE FRAME
Individual Section Quantity3
Nominal Thread Size0.164 INCHES SINGLE MOUNTING FACILITY IN
Shaft Length0.806 INCHES MINIMUM AND 0.869 INCHES MAXIMUM SINGLE ACTUATOR IN
Contact Switching ActionBREAKS BEFORE MAKES EACH SECTION REAR
Contact Voltage Rating in Volts115.0 AC AT SEA LEVEL
Contact Voltage Rating in Volts28.0 DC AT SEA LEVEL
Operating Temp Range-65.0 TO 85.0 CELSIUS DEGC
Thread Class2B SINGLE MOUNTING FACILITY
Test Data Document81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Switch Actuator Positioning Increment30.0 DEGREES SINGLE ACTUATOR
Thread Quantity Per Inch32 SINGLE MOUNTING FACILITY
Switch Actuator Indexing Position Quantity12 SINGLE ACTUATOR
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC) SINGLE MOUNTING FACILITY
Shaft Flat/slot Angular Location330.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR
Flat Height0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM SINGLE ACTUATOR IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
3130-01-260-4887113942 POSSIBLE MATCH
CAP,PILLOW BLOCK
Possible match (shared part number)Lake Shore Systems, Inc.
Cross-Reference Index
Part NumberManufacturer
10669497-003 PRIMARY Us Army Aviation and Missile Command (USA)
Reference documents
ReferenceMeaning
800.7645-C 5/1 Secondary reference
U.S. Government activity
11394-2 5/1 Secondary reference
Shallco, Inc
C-7645-C 5/9 Secondary reference
U.S. Government activity
11394-2 5/9 Secondary reference
Meggitt (new Hampshire), Inc
Related Parts
3130-01-260-4887POSSIBLE MATCH
CAP,PILLOW BLOCK
113942

Frequently Asked Questions

What is NSN 5930-00-491-6355?

NSN 5930-00-491-6355 is a Switch,rotary, manufactured by Us Army Aviation and Missile Command, classified under FSC 5930, Switches. Status: active.

What part numbers are listed for NSN 5930-00-491-6355?

NSN 5930-00-491-6355 has 1 manufacturer part number on file: 10669497-003 (Us Army Aviation and Missile Command).

What NSN replaces 5930-00-491-6355?

1 possible match (shared part number, not a government interchangeability claim): 3130-01-260-4887. Verify interchangeability with system specifications before substitution.

What are the specifications of 10669497-003?

Key specifications for 10669497-003: Shaft Type: ROUND, FLATTED SINGLE ACTUATOR; Overall Height: 2.266 INCHES MAXIMUM IN; Shaft Diameter: 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL. 27 specifications are documented in the U.S. Government catalog.

Is NSN 5930-00-491-6355 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com