PartsTable TECHNICAL DATA SHEET
NSN 5930-00-486-6164Government record, cited

Switch, Rotary5930-00-486-6164

NSN 5930-00-486-6164 · NIIN 004866164 · Part number 003455
Moog Inc Div Moog Inc., Space and Defense - Salt Lake City · FSC 5930 — Switches · FSG 59 — Electrical and Electronic Equipment Components · CAGE 19156
Government record, cited
NSN 5930-00-486-6164 — this item is cataloged by the U.S. Government under National Stock Number 5930-00-486-6164. Manufacturer of record part number: 003455.
Also searched as  5930-00-486-6164 · 5930004866164 · NIIN 004866164 · 00-486-6164 · FSC 5930 Switches · CAGE 19156 · 003455 · V-72052N-SR05N30C3MG0 · V72052NSR05N30C3
Nearby stock numbers  ·
Features
  • Switch,rotary — FSC 5930
  • Shaft Type: ROUND, FLATTED SINGLE ACTUATOR
  • Shaft Diameter: 0.250 INCHES NOMINAL SINGLE ACTUATOR IN
  • Switch Contact Basic Design: NONPILE-UP SYMMETRICAL
  • Terminal Type: TAB, SOLDER LUG
  • Overall Diameter: 1.156 INCHES MAXIMUM IN
  • First Flat Length: 0.250 INCHES NOMINAL SINGLE ACTUATOR IN
  • Contact Load Current Rating: 100.0 MILLIAMPERES RESISTIVE LOAD DC AT ALTITUDE
Identification
  • NSN: 5930-00-486-6164
  • NIIN: 004866164
  • FSC: 5930 — Switches
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 003455
  • Manufacturer: Moog Inc Div Moog Inc., Space and Defense - Salt Lake City
General Description

The Switch,rotary, cataloged under National Stock Number 5930-00-486-6164, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Moog Inc Div Moog Inc., Space and Defense - Salt Lake City. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5930-00-486-6164
Primary Part Number003455
Item NameSwitch,rotary
FSC / FSG5930 / 59 — Switches
ManufacturerMoog Inc Div Moog Inc., Space and Defense - Salt Lake City
StatusACTIVE
Shaft TypeROUND, FLATTED SINGLE ACTUATOR
Shaft Diameter0.250 INCHES NOMINAL SINGLE ACTUATOR IN
Switch Contact Basic DesignNONPILE-UP SYMMETRICAL
Terminal TypeTAB, SOLDER LUG
Overall Diameter1.156 INCHES MAXIMUM IN
First Flat Length0.250 INCHES NOMINAL SINGLE ACTUATOR IN
Contact Load Current Rating100.0 MILLIAMPERES RESISTIVE LOAD DC AT ALTITUDE
Contact Load Current Rating50.0 MILLIAMPERES RESISTIVE LOAD AC AT ALTITUDE
Contact Load Current Rating200.0 MILLIAMPERES RESISTIVE LOAD AND 20.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL
Contact Load Current Rating100.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL
Mounting MethodTHREADED BUSHING SINGLE MOUNTING FACILITY
Thread Length0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
Pole Quantity2 EACH SECTION FRONT
Style DesignatorCIRCULAR WAFER, BUSHING MOUNT
Individual Section Quantity2
Nonturn Device TypeSLOTTED BUSHING AT 3:00 OCLOCK
Nominal Thread Size0.375 INCHES SINGLE MOUNTING FACILITY IN
Shaft Length0.750 INCHES NOMINAL SINGLE ACTUATOR IN
Switch Actuator Stop Device TypeFIXED STOP SINGLE ACTUATOR
Contact Switching ActionBREAKS BEFORE MAKES EACH SECTION REAR
Contact Voltage Rating in Volts28.0 DC AT ALTITUDE
Contact Voltage Rating in Volts115.0 AC AT ALTITUDE
Contact Voltage Rating in Volts28.0 DC AT SEA LEVEL
Contact Voltage Rating in Volts115.00 AC AT SEA LEVEL
Operating Temp Range-65.0 TO 125.0 CELSIUS DEGC
Thread Class2A SINGLE MOUNTING FACILITY A
Test Data Document81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Switch Actuator Positioning Increment30.0 DEGREES SINGLE ACTUATOR
Switch Actuator Indexing Position Quantity5 SINGLE ACTUATOR
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5365-01-250-9168003455 POSSIBLE MATCH
PLUG,MACHINE THREAD
Possible match (shared part number)Bosch Rexroth Corporation Div Industrial Hydraulics
Cross-Reference Index
Part NumberManufacturer
003455 PRIMARY Moog Inc Div Moog Inc., Space and Defense - Salt Lake City (USA)
Reference documents
ReferenceMeaning
V-72052N-SR05N30C3MG0 5/9 Secondary reference
Eaton Corp Aerospace and Commercial Controls Div Jbt Products
V72052NSR05N30C3 C/1 Advisory reference — outside the item-of-supply concept
Lee Co the J B T Div
Related Parts
5365-01-250-9168POSSIBLE MATCH
PLUG,MACHINE THREAD
003455

Frequently Asked Questions

What is NSN 5930-00-486-6164?

NSN 5930-00-486-6164 is a Switch,rotary, manufactured by Moog Inc Div Moog Inc., Space and Defense - Salt Lake City, classified under FSC 5930, Switches. Status: active.

What part numbers are listed for NSN 5930-00-486-6164?

NSN 5930-00-486-6164 has 1 manufacturer part number on file: 003455 (Moog Inc Div Moog Inc., Space and Defense - Salt Lake City).

What NSN replaces 5930-00-486-6164?

1 possible match (shared part number, not a government interchangeability claim): 5365-01-250-9168. Verify interchangeability with system specifications before substitution.

What are the specifications of 003455?

Key specifications for 003455: Shaft Type: ROUND, FLATTED SINGLE ACTUATOR; Shaft Diameter: 0.250 INCHES NOMINAL SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL; Terminal Type: TAB, SOLDER LUG. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5930-00-486-6164 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com