The Switch,rotary, cataloged under National Stock Number 5930-00-479-9984, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Us Army Aviation and Missile Command. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-00-479-9984 |
| Primary Part Number | 10181707-3 |
| Item Name | Switch,rotary |
| FSC / FSG | 5930 / 59 — Switches |
| Manufacturer | Us Army Aviation and Missile Command |
| Status | ACTIVE |
| Shaft Type | ROUND, FLATTED SINGLE ACTUATOR |
| Shaft Diameter | 0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Switch Contact Basic Design | NONPILE-UP SYMMETRICAL |
| Terminal Type | TAB, SOLDER LUG |
| Mounting Facility Pattern | TWO POSITION IN-LINE SINGLE MOUNTING FACILITY |
| First Flat Length | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Detent Rotational Torque Range | +1.500 TO 6.000 INCH-POUNDS SINGLE ACTUATOR IN |
| Contact Load Current Rating | 1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| Mounting Method | THREADED HOLE(S) SINGLE MOUNTING FACILITY |
| Pole Quantity | 1 EACH SECTION REAR |
| Style Designator | SQUARE WAFER, PANEL MOUNT |
| Individual Section Quantity | 3 |
| Nominal Thread Size | 0.138 INCHES SINGLE MOUNTING FACILITY IN |
| Shaft Length | 0.830 INCHES MINIMUM AND 0.845 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Contact Switching Action | BREAKS BEFORE MAKES EACH SECTION REAR |
| Contact Voltage Rating in Volts | 28.0 DC AT SEA LEVEL |
| Operating Temp Range | -65.0 TO 85.0 CELSIUS DEGC |
| Thread Class | 2B SINGLE MOUNTING FACILITY |
| Test Data Document | 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Switch Actuator Positioning Increment | 22.5 DEGREES SINGLE ACTUATOR |
| Thread Quantity Per Inch | 32 SINGLE MOUNTING FACILITY |
| Switch Actuator Indexing Position Quantity | 16 SINGLE ACTUATOR |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) SINGLE MOUNTING FACILITY |
| Shaft Flat/slot Angular Location | 45.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR |
| Flat Height | 0.216 INCHES MINIMUM AND 0.220 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Longest Horizontal Distance Between Mounting Centers | 1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN |
| Throw Quantity | 16 EACH SECTION REAR |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 10181707-3 PRIMARY | Us Army Aviation and Missile Command (USA) |
| Reference | Meaning |
|---|---|
| 2H50B16-3X2547 | 5/1 Secondary reference Shallcross Inc |
| 2H50B16-3X2547 | 5/1 Secondary reference U.S. Government activity |
NSN 5930-00-479-9984 is a Switch,rotary, manufactured by Us Army Aviation and Missile Command, classified under FSC 5930, Switches. Status: active.
NSN 5930-00-479-9984 has 1 manufacturer part number on file: 10181707-3 (Us Army Aviation and Missile Command).
Key specifications for 10181707-3: Shaft Type: ROUND, FLATTED SINGLE ACTUATOR; Overall Height: 1.757 INCHES MAXIMUM IN; Shaft Diameter: 0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL. 27 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.