PartsTable TECHNICAL DATA SHEET
NSN 5930-00-433-7194Government record, cited

Switch, Rotary5930-00-433-7194

NSN 5930-00-433-7194 · NIIN 004337194 · Part number 10183073-003
Us Army Aviation and Missile Command · FSC 5930 — Switches · FSG 59 — Electrical and Electronic Equipment Components · CAGE 18876
Government record, cited
NSN 5930-00-433-7194 — this item is cataloged by the U.S. Government under National Stock Number 5930-00-433-7194. Manufacturer of record part number: 10183073-003.
Also searched as  5930-00-433-7194 · 5930004337194 · NIIN 004337194 · 00-433-7194 · FSC 5930 Switches · CAGE 18876 · 10183073-003 · 2J50B12-2X2695 · 2J50B12-2X2695
Nearby stock numbers  ·
Features
  • Switch,rotary — FSC 5930
  • Shaft Type: ROUND, FLATTED SINGLE ACTUATOR
  • Shaft Diameter: 0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN
  • Switch Contact Basic Design: NONPILE-UP SYMMETRICAL
  • Terminal Type: TAB, SOLDER LUG
  • Mounting Facility Pattern: TWO POSITION IN-LINE SINGLE MOUNTING FACILITY
  • First Flat Length: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM SINGLE ACTUATOR IN
  • Detent Rotational Torque Range: +1.500 TO 6.000 INCH-POUNDS SINGLE ACTUATOR IN
Identification
  • NSN: 5930-00-433-7194
  • NIIN: 004337194
  • FSC: 5930 — Switches
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 10183073-003
  • Manufacturer: Us Army Aviation and Missile Command
General Description

The Switch,rotary, cataloged under National Stock Number 5930-00-433-7194, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Us Army Aviation and Missile Command. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5930-00-433-7194
Primary Part Number10183073-003
Item NameSwitch,rotary
FSC / FSG5930 / 59 — Switches
ManufacturerUs Army Aviation and Missile Command
StatusACTIVE
Shaft TypeROUND, FLATTED SINGLE ACTUATOR
Shaft Diameter0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN
Switch Contact Basic DesignNONPILE-UP SYMMETRICAL
Terminal TypeTAB, SOLDER LUG
Mounting Facility PatternTWO POSITION IN-LINE SINGLE MOUNTING FACILITY
First Flat Length0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM SINGLE ACTUATOR IN
Detent Rotational Torque Range+1.500 TO 6.000 INCH-POUNDS SINGLE ACTUATOR IN
Rotor Through Connection Quantity1 EACH SECTION
Contact Load Current Rating1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL
Mounting MethodTHREADED HOLE(S) SINGLE MOUNTING FACILITY
Pole Quantity1 EACH SECTION REAR
Style DesignatorSQUARE WAFER, PANEL MOUNT
Individual Section Quantity2
Nominal Thread Size0.138 INCHES SINGLE MOUNTING FACILITY IN
Shaft Length0.830 INCHES MINIMUM AND 0.845 INCHES MAXIMUM SINGLE ACTUATOR IN
Contact Switching ActionBREAKS BEFORE MAKES EACH SECTION FRONT
Contact Voltage Rating in Volts28.0 DC AT SEA LEVEL
Operating Temp Range-65.0 TO 85.0 CELSIUS DEGC
Thread Class2B SINGLE MOUNTING FACILITY
Test Data Document81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Switch Actuator Positioning Increment30.0 DEGREES SINGLE ACTUATOR
Thread Quantity Per Inch32 SINGLE MOUNTING FACILITY
Switch Actuator Indexing Position Quantity12 SINGLE ACTUATOR
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC) SINGLE MOUNTING FACILITY
Shaft Flat/slot Angular Location210.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR
Flat Height0.207 INCHES MINIMUM AND 0.217 INCHES MAXIMUM SINGLE ACTUATOR IN
Longest Horizontal Distance Between Mounting Centers1.380 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
2J50B12-2X2695 Electro Switch Corp Div Electroswitch (USA)
10183073-003 PRIMARY Us Army Aviation and Missile Command (USA)
Reference documents
ReferenceMeaning
2J50B12-2X2695 5/1 Secondary reference
Shallcross Inc
No interchangeability data on file.
Other items in FSC 5930 — Switches
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5930-00-000-0117
SWITCH,PRESSURE
5930-00-001-1407
5930-00-001-1407 · Item name not on file
5930-00-001-1890
SWITCH,SENSITIVE
5930-00-001-2571
SWITCH,ROTARY
5930-00-001-2575
5930-00-001-2575 · Item name not on file
5930-00-001-2580
5930-00-001-2580 · Item name not on file
5930-00-001-2608
5930-00-001-2608 · Item name not on file
5930-00-001-2609
5930-00-001-2609 · Item name not on file

Frequently Asked Questions

What is NSN 5930-00-433-7194?

NSN 5930-00-433-7194 is a Switch,rotary, manufactured by Us Army Aviation and Missile Command, classified under FSC 5930, Switches. Status: active.

What part numbers are listed for NSN 5930-00-433-7194?

NSN 5930-00-433-7194 has 2 manufacturer part numbers on file: 2J50B12-2X2695 (Electro Switch Corp Div Electroswitch), 10183073-003 (Us Army Aviation and Missile Command).

What are the specifications of 10183073-003?

Key specifications for 10183073-003: Shaft Type: ROUND, FLATTED SINGLE ACTUATOR; Overall Height: 2.195 INCHES MAXIMUM IN; Shaft Diameter: 0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL. 27 specifications are documented in the U.S. Government catalog.

Is NSN 5930-00-433-7194 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com