The Switch,rotary, cataloged under National Stock Number 5930-00-424-9180, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is L3harris Technologies, Inc. Dba Harris Corp Div Antenna Products. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-00-424-9180 |
| Primary Part Number | 367829-2 |
| Item Name | Switch,rotary |
| FSC / FSG | 5930 / 59 — Switches |
| Manufacturer | L3harris Technologies, Inc. Dba Harris Corp Div Antenna Products |
| Status | ACTIVE |
| Shaft Type | ROUND, HOLLOWED, FLATTED FIRST ACTUATOR |
| Shaft Type | ROUND, FLATTED SECOND ACTUATOR |
| Shaft Diameter | 0.125 INCHES NOMINAL SECOND ACTUATOR IN |
| Shaft Diameter | 0.250 INCHES NOMINAL FIRST ACTUATOR IN |
| Switch Contact Basic Design | NONPILE-UP SYMMETRICAL |
| Terminal Type | TAB, SOLDER LUG |
| Overall Diameter | 1.500 INCHES MAXIMUM IN |
| First Flat Length | 0.250 INCHES NOMINAL FIRST ACTUATOR IN |
| First Flat Length | 0.250 INCHES NOMINAL SECOND ACTUATOR IN |
| Rotor Through Connection Quantity | 1 EACH SECTION |
| Contact Load Current Rating | 5.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| Contact Load Current Rating | 3.0 AMPERES RESISTIVE LOAD AND 2.0 AMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| Mounting Method | THREADED BUSHING SINGLE MOUNTING FACILITY |
| Thread Length | 0.380 INCHES NOMINAL SINGLE MOUNTING FACILITY IN |
| Pole Quantity | 1 EACH SECTION FRONT |
| Style Designator | TAP, CIRCULAR, BUSHING MOUNT |
| Individual Section Quantity | 2 |
| Nonturn Device Type | SLOTTED BUSHING AT 3:00 OCLOCK |
| Nominal Thread Size | 0.375 INCHES SINGLE MOUNTING FACILITY IN |
| Shaft Length | 0.870 INCHES NOMINAL FIRST ACTUATOR IN |
| Shaft Length | 1.310 INCHES NOMINAL SECOND ACTUATOR IN |
| Switch Actuator Stop Device Type | FIXED STOP ALL ACTUATORS |
| Contact Switching Action | BREAKS BEFORE MAKES EACH SECTION REAR |
| Contact Voltage Rating in Volts | 115.0 AC AT SEA LEVEL |
| Contact Voltage Rating in Volts | 28.0 DC AT SEA LEVEL |
| Operating Temp Range | -65.0 TO 125.0 CELSIUS DEGC |
| Thread Class | 2A SINGLE MOUNTING FACILITY A |
| Test Data Document | 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Switch Actuator Positioning Increment | 22.5 DEGREES FIRST ACTUATOR |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 367829-2 PRIMARY | L3harris Technologies, Inc. Dba Harris Corp Div Antenna Products (USA) |
| Reference | Meaning |
|---|---|
| 53-1921-2 | 5/2 Secondary reference U.S. Government activity |
NSN 5930-00-424-9180 is a Switch,rotary, manufactured by L3harris Technologies, Inc. Dba Harris Corp Div Antenna Products, classified under FSC 5930, Switches. Status: active.
NSN 5930-00-424-9180 has 1 manufacturer part number on file: 367829-2 (L3harris Technologies, Inc. Dba Harris Corp Div Antenna Products).
1 possible match (shared part number, not a government interchangeability claim): 3020-01-641-2063. Verify interchangeability with system specifications before substitution.
Key specifications for 367829-2: Shaft Type: ROUND, HOLLOWED, FLATTED FIRST ACTUATOR; Shaft Type: ROUND, FLATTED SECOND ACTUATOR; Shaft Diameter: 0.125 INCHES NOMINAL SECOND ACTUATOR IN; Shaft Diameter: 0.250 INCHES NOMINAL FIRST ACTUATOR IN. 29 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.