The Switch,rotary, cataloged under National Stock Number 5930-00-419-5339, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Us Army Aviation and Missile Command. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-00-419-5339 |
| Primary Part Number | 10675125-003 |
| Item Name | Switch,rotary |
| FSC / FSG | 5930 / 59 — Switches |
| Manufacturer | Us Army Aviation and Missile Command |
| Status | ACTIVE |
| Shaft Type | ROUND, FLATTED SINGLE ACTUATOR |
| Shaft Diameter | 0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Switch Contact Basic Design | NONPILE-UP SYMMETRICAL |
| Terminal Type | TAB, SOLDER LUG |
| Overall Diameter | 0.843 INCHES MAXIMUM IN |
| First Flat Length | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Detent Rotational Torque Range | +0.500 TO 2.000 INCH-POUNDS SINGLE ACTUATOR IN |
| Rotor Through Connection Quantity | 2 EACH SECTION |
| Contact Load Current Rating | 250.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| Contact Load Current Rating | 250.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| Mounting Method | THREADED BUSHING SINGLE MOUNTING FACILITY |
| Thread Length | 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN |
| Pole Quantity | 2 EACH SECTION FRONT |
| Style Designator | TAP, CIRCULAR, BUSHING MOUNT |
| Individual Section Quantity | 2 |
| Nonturn Device Type | FLATTED BUSHING AT 3:00 OCLOCK |
| Nominal Thread Size | 0.250 INCHES SINGLE MOUNTING FACILITY IN |
| Shaft Length | 0.647 INCHES MINIMUM AND 0.727 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Switch Actuator Stop Device Type | FIXED STOP SINGLE ACTUATOR |
| Contact Voltage Rating in Volts | 115.0 AC AT SEA LEVEL |
| Contact Voltage Rating in Volts | 28.0 DC AT SEA LEVEL |
| Operating Temp Range | -65.0 TO 85.0 CELSIUS DEGC |
| Thread Class | 2A SINGLE MOUNTING FACILITY A |
| Test Data Document | 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Switch Actuator Positioning Increment | 30.0 DEGREES SINGLE ACTUATOR |
| Switch Actuator Indexing Position Quantity | 3 SINGLE ACTUATOR |
| Thread Series Designator | UNEF SINGLE MOUNTING FACILITY |
| Shaft Flat/slot Angular Location | 180.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR |
| Flat Height | 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 10675125-003 PRIMARY | Us Army Aviation and Missile Command (USA) |
| Reference | Meaning |
|---|---|
| 9YY23234-2-3N | 5/9 Secondary reference U.S. Government activity |
| 5930004195339 | 6/9 Informative reference only E.c.a Etablissement Central Des Approvisionnements Des Forces Armees Royales |
| 5930004195339 | 5/9 Secondary reference E.c.a Etablissement Centrald'approvisionnement Des Forces Armee |
NSN 5930-00-419-5339 is a Switch,rotary, manufactured by Us Army Aviation and Missile Command, classified under FSC 5930, Switches. Status: active.
NSN 5930-00-419-5339 has 1 manufacturer part number on file: 10675125-003 (Us Army Aviation and Missile Command).
Key specifications for 10675125-003: Shaft Type: ROUND, FLATTED SINGLE ACTUATOR; Shaft Diameter: 0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL; Terminal Type: TAB, SOLDER LUG. 29 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.