The Switch,rotary, cataloged under National Stock Number 5930-00-386-8405, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-00-386-8405 |
| Item Name | Switch,rotary |
| FSC / FSG | 5930 / 59 — Switches |
| Status | ACTIVE |
| Shaft Type | ROUND, PARALLEL FLATTED, THREADED HOLE SINGLE ACTUATOR |
| Shaft Diameter | 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Switch Contact Basic Design | NONPILE-UP SYMMETRICAL |
| Nonturn Device Radius | 0.531 INCHES NOMINAL AT 3:00 OCLOCK IN |
| Terminal Type | TAB, SOLDER LUG |
| Overall Diameter | 1.100 INCHES NOMINAL IN |
| First Flat Length | 0.318 INCHES NOMINAL SINGLE ACTUATOR IN |
| Detent Rotational Torque Range | +2.500 TO 4.000 INCH-POUNDS SINGLE ACTUATOR IN |
| Rotor Through Connection Quantity | 2 EACH SECTION |
| Contact Load Current Rating | 500.0 MILLIAMPERES RESISTIVE LOAD DC AT ALTITUDE |
| Contact Load Current Rating | 2.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| Contact Load Current Rating | 1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| Mounting Method | THREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY |
| Thread Length | 0.410 INCHES NOMINAL SINGLE MOUNTING FACILITY IN |
| Pole Quantity | 2 EACH SECTION FRONT |
| Style Designator | TAP, CIRCULAR, BUSHING MOUNT |
| Switch Actuator Momentary Position | CLOCKWISE AND COUNTERCLOCKWISE SINGLE ACTUATOR |
| Individual Section Quantity | 2 |
| Nonturn Device Type | PIN AT 3:00 OCLOCK |
| Features Provided | PUSH TO TURN |
| Nominal Thread Size | 0.375 INCHES SINGLE MOUNTING FACILITY IN |
| Shaft Length | 0.850 INCHES NOMINAL SINGLE ACTUATOR IN |
| Switch Actuator Stop Device Type | FIXED STOP SINGLE ACTUATOR |
| Width Between Flats | 0.187 INCHES NOMINAL SINGLE ACTUATOR IN |
| Contact Switching Action | BREAKS BEFORE MAKES EACH SECTION REAR |
| Contact Voltage Rating in Volts | 115.0 AC AT SEA LEVEL |
| Contact Voltage Rating in Volts | 28.0 DC AT SEA LEVEL |
| Thread Class | 2A SINGLE MOUNTING FACILITY A |
| Switch Actuator Positioning Increment | 30.0 DEGREES SINGLE ACTUATOR |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 3020497-001 | C/1 Advisory reference — outside the item-of-supply concept Naval Sea Systems Command |
| 87-1932 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5930-00-386-8405 is a Switch,rotary, classified under FSC 5930, Switches. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 6320-01-371-3047. Verify interchangeability with system specifications before substitution.
Key specifications for 5930-00-386-8405: Shaft Type: ROUND, PARALLEL FLATTED, THREADED HOLE SINGLE ACTUATOR; Shaft Diameter: 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL; Nonturn Device Radius: 0.531 INCHES NOMINAL AT 3:00 OCLOCK IN. 29 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.