PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

LM44224SH21PC2Switch,rotary

Hamilton Standard Electronics Systems Inc Tele-Dynamics Div · NSN 5930-00-222-0324 · FSC 5930 · No Item Name Available
Verified by PartsTable
NSN 5930-00-222-0324 — this item is cataloged by the U.S. Government under National Stock Number 5930-00-222-0324. Primary manufacturer part number: LM44224SH21PC2.
Features
  • Switch,rotary — FSC 5930
  • Mounting Facility Circle Radius: 1.156 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
  • Switch Contact Basic Design: NONPILE-UP SYMMETRICAL
  • Shaft Type: ROUND, FLATTED, THREADED HOLE SINGLE ACTUATOR
  • Contact Switching Action: BREAKS BEFORE MAKES EACH SECTION FRONT
  • Switch Actuator Positioning Increment: 90.0 DEGREES SINGLE ACTUATOR
  • Contact Load Current Rating: 10.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
  • Flat Height: 0.219 INCHES NOMINAL SINGLE ACTUATOR IN
Applications
  • Circuit control and protection
  • Equipment power management
  • Signal routing
General Description

The Switch,rotary, cataloged under National Stock Number 5930-00-222-0324, is classified within Federal Supply Class 5930 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Hamilton Standard Electronics Systems Inc Tele-Dynamics Div. Government technical data includes 25 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 7 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 4 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5930-00-222-0324
Primary Part NumberLM44224SH21PC2
Item NameSwitch,rotary
FSC / FSG5930 / 59 — No Item Name Available
ManufacturerHamilton Standard Electronics Systems Inc Tele-Dynamics Div
StatusACTIVE
Mounting Facility Circle Radius1.156 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
Switch Contact Basic DesignNONPILE-UP SYMMETRICAL
Shaft TypeROUND, FLATTED, THREADED HOLE SINGLE ACTUATOR
Contact Switching ActionBREAKS BEFORE MAKES EACH SECTION FRONT
Switch Actuator Positioning Increment90.0 DEGREES SINGLE ACTUATOR
Contact Load Current Rating10.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
Flat Height0.219 INCHES NOMINAL SINGLE ACTUATOR IN
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC) SINGLE MOUNTING FACILITY
First Flat Length0.438 INCHES NOMINAL SINGLE ACTUATOR IN
Thread Quantity Per Inch24 SINGLE MOUNTING FACILITY
Shaft Length0.812 INCHES NOMINAL SINGLE ACTUATOR IN
Nominal Thread Size0.190 INCHES SINGLE MOUNTING FACILITY IN
Knob Manufacturer Part Number8204-7Y
Knob Manufacturer Code82121
Features ProvidedACTUATOR KNOB
Mounting Facility PatternFOUR POSITION CIRCULAR SINGLE MOUNTING FACILITY
Contact Voltage Rating in Volts120.0 DC AT SEA LEVEL
Shaft Diameter0.250 INCHES NOMINAL SINGLE ACTUATOR IN
Nondefinitive Spec/std Data1SR4F2 TYPE
Terminal TypeTAB W/SCREW
Individual Section Quantity4
Contact Load Current Rating10.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL
Contact Voltage Rating in Volts125.0 AC AT SEA LEVEL
Switch Actuator Indexing Position Quantity4 SINGLE ACTUATOR
Test Data Document81349-MIL-S-15291 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Lifecycle & Compliance
Acquisition StatusACTIVE
HAZMATNo
Verified Substitutes 4
3110-00-100-0617142842 INTERCHANGEABLE
Cup,tapered Roller Bearing
Rolls-Royce Solutions America Inc
5815-00-897-9519142842 INTERCHANGEABLE
Key
Telemechanics Inc
5930-01-006-7828700665-2 INTERCHANGEABLE
Switch,rotary
L-3 Communications Westwood Corporation Dba Nmp Division Div L3 Westwood Corporation
5930-01-236-8953 INTERCHANGEABLE
Switch,rotary
Cross-Reference Index
Part NumberManufacturer
LM44224SH21PC2 Hamilton Standard Electronics Systems Inc Tele-Dynamics Div (USA)
14284-2 Hamilton Standard Electronics Systems Inc Tele-Dynamics Div (USA)
LM44223SH20PC2 Hamilton Standard Electronics Systems Inc Tele-Dynamics Div (USA)
MILS15291 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
1SR4F2 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
LM44222SH19PC2 Hamilton Standard Electronics Systems Inc Tele-Dynamics Div (USA)
C10341C Electro Switch Corp. Dba Electro Switch Corp (USA)
Related Parts
3110-00-100-0617INTERCHANGEABLE
CUP,TAPERED ROLLER BEARING
142842
5815-00-897-9519INTERCHANGEABLE
KEY
142842
5930-01-006-7828INTERCHANGEABLE
SWITCH,ROTARY
700665-2
5930-01-236-8953INTERCHANGEABLE
SWITCH,ROTARY

Frequently Asked Questions

What is NSN 5930-00-222-0324?

NSN 5930-00-222-0324 is a Switch,rotary, manufactured by Hamilton Standard Electronics Systems Inc Tele-Dynamics Div, classified under FSC 5930 (No Item Name Available). Status: active.

What are the part numbers for NSN 5930-00-222-0324?

NSN 5930-00-222-0324 has 7 cross-referenced part numbers: LM44224SH21PC2 (Hamilton Standard Electronics Systems Inc Tele-Dynamics Div), 14284-2 (Hamilton Standard Electronics Systems Inc Tele-Dynamics Div), LM44223SH20PC2 (Hamilton Standard Electronics Systems Inc Tele-Dynamics Div), MILS15291 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 1SR4F2 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M) and 2 more.

What NSN replaces 5930-00-222-0324?

There are 4 known substitutes for 5930-00-222-0324: 3110-00-100-0617, 5815-00-897-9519, 5930-01-006-7828 and 1 more. Verify interchangeability with system specifications before substitution.

What are the specifications of LM44224SH21PC2?

Key specifications for LM44224SH21PC2: Overall Width: 2.000 INCHES NOMINAL IN; Mounting Facility Circle Radius: 1.156 INCHES NOMINAL SINGLE MOUNTING FACILITY IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL; Shaft Type: ROUND, FLATTED, THREADED HOLE SINGLE ACTUATOR. 27 total characteristics are documented in the Federal Logistics Information System.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com