PartsTable TECHNICAL DATA SHEET
NSN 5930-00-204-7480Government record, cited

Switch, Rotary5930-00-204-7480

NSN 5930-00-204-7480 · NIIN 002047480
FSC 5930 — Switches · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5930-00-204-7480 · 5930002047480 · NIIN 002047480 · 00-204-7480 · FSC 5930 Switches · 69-1908 · 1K053-1
Nearby stock numbers  ·
Features
  • Switch,rotary — FSC 5930
  • Shaft Type: ROUND, FLATTED SINGLE ACTUATOR
  • Shaft Diameter: 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM SINGLE ACTUATOR IN
  • Switch Contact Basic Design: NONPILE-UP SYMMETRICAL
  • Nonturn Device Radius: 0.432 INCHES NOMINAL AT 12:00 OCLOCK IN
  • Terminal Type: TAB, SOLDER LUG
  • Overall Diameter: 1.200 INCHES MAXIMUM IN
  • First Flat Length: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM SINGLE ACTUATOR IN
Identification
  • NSN: 5930-00-204-7480
  • NIIN: 002047480
  • FSC: 5930 — Switches
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Switch,rotary, cataloged under National Stock Number 5930-00-204-7480, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5930-00-204-7480
Item NameSwitch,rotary
FSC / FSG5930 / 59 — Switches
StatusACTIVE
Shaft TypeROUND, FLATTED SINGLE ACTUATOR
Shaft Diameter0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM SINGLE ACTUATOR IN
Switch Contact Basic DesignNONPILE-UP SYMMETRICAL
Nonturn Device Radius0.432 INCHES NOMINAL AT 12:00 OCLOCK IN
Terminal TypeTAB, SOLDER LUG
Overall Diameter1.200 INCHES MAXIMUM IN
First Flat Length0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM SINGLE ACTUATOR IN
Detent Rotational Torque Range+0.500 TO 1.500 INCH-POUNDS SINGLE ACTUATOR IN
Rotor Through Connection Quantity2 SINGLE SECTION
Contact Load Current Rating5.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
Contact Load Current Rating3.0 AMPERES RESISTIVE LOAD AND 2.0 AMPERES INDUCTIVE LOAD DC AT SEA LEVEL
Mounting MethodTHREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY
Thread Length0.410 INCHES MINIMUM AND 0.470 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN
Pole Quantity2 SINGLE SECTION FRONT
Style DesignatorTAP, CIRCULAR, BUSHING MOUNT
Individual Section Quantity1
Nonturn Device TypeTAB AT 12:00 OCLOCK
Nominal Thread Size0.375 INCHES SINGLE MOUNTING FACILITY IN
Shaft Length0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM SINGLE ACTUATOR IN
Switch Actuator Stop Device TypeFIXED STOP SINGLE ACTUATOR
Contact Switching ActionMAKES BEFORE BREAKS SINGLE SECTION REAR
Contact Voltage Rating in Volts115.0 AC AT SEA LEVEL
Contact Voltage Rating in Volts28.0 DC AT SEA LEVEL
Operating Temp Range-60.0 TO 125.0 CELSIUS DEGC
Thread Class2A SINGLE MOUNTING FACILITY A
Switch Actuator Positioning Increment45.0 DEGREES SINGLE ACTUATOR
Switch Actuator Indexing Position Quantity4 SINGLE ACTUATOR
Thread Series DesignatorUNEF SINGLE MOUNTING FACILITY
Shaft Flat/slot Angular Location180.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
4330-01-608-9105691908 POSSIBLE MATCH
BRACKET,FILTER MOUNTING
Possible match (shared part number)Briggs and Stratton Corp
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
69-1908 3/2 Design control — primary reference
U.S. Government activity
1K053-1 5/9 Secondary reference
Northrop Grumman Corp Electronic Systems Defensive System Div
Related Parts
4330-01-608-9105POSSIBLE MATCH
BRACKET,FILTER MOUNTING
691908

Frequently Asked Questions

What is NSN 5930-00-204-7480?

NSN 5930-00-204-7480 is a Switch,rotary, classified under FSC 5930, Switches. Status: active.

What NSN replaces 5930-00-204-7480?

1 possible match (shared part number, not a government interchangeability claim): 4330-01-608-9105. Verify interchangeability with system specifications before substitution.

What are the specifications of 5930-00-204-7480?

Key specifications for 5930-00-204-7480: Shaft Type: ROUND, FLATTED SINGLE ACTUATOR; Shaft Diameter: 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL; Nonturn Device Radius: 0.432 INCHES NOMINAL AT 12:00 OCLOCK IN. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5930-00-204-7480 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com