PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

11928Switch,rotary

Drs Advanced Isr, Llc · NSN 5930-00-194-9110 · FSC 5930 · No Item Name Available
Verified by PartsTable
NSN 5930-00-194-9110 — this item is cataloged by the U.S. Government under National Stock Number 5930-00-194-9110. Primary manufacturer part number: 11928.
Features
  • Switch,rotary — FSC 5930
  • Thread Series Designator: UNEF SINGLE MOUNTING FACILITY
  • Contact Load Current Rating: 200.0 MILLIAMPERES RESISTIVE LOAD AND 20.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL
  • Contact Load Current Rating: 100.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL
  • Nominal Thread Size: 0.375 INCHES SINGLE MOUNTING FACILITY IN
  • Terminal Type: TAB, SOLDER LUG
  • Shaft Diameter: 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN
  • Nonturn Device Type: PIN AT 5:00 OCLOCK
Applications
  • Circuit control and protection
  • Equipment power management
  • Signal routing
General Description

The Switch,rotary, cataloged under National Stock Number 5930-00-194-9110, is classified within Federal Supply Class 5930 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Drs Advanced Isr, Llc. Government technical data includes 27 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 11 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5930-00-194-9110
Primary Part Number11928
Item NameSwitch,rotary
FSC / FSG5930 / 59 — No Item Name Available
ManufacturerDrs Advanced Isr, Llc
StatusACTIVE
Thread Series DesignatorUNEF SINGLE MOUNTING FACILITY
Contact Load Current Rating200.0 MILLIAMPERES RESISTIVE LOAD AND 20.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL
Contact Load Current Rating100.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL
Nominal Thread Size0.375 INCHES SINGLE MOUNTING FACILITY IN
Terminal TypeTAB, SOLDER LUG
Shaft Diameter0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN
Nonturn Device TypePIN AT 5:00 OCLOCK
Style DesignatorCIRCULAR WAFER, BUSHING MOUNT
Test Data Document81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Switch Actuator Positioning Increment60.0 DEGREES SINGLE ACTUATOR
Shaft TypeROUND, FLATTED SINGLE ACTUATOR
Contact Switching ActionBREAKS BEFORE MAKES EACH SECTION REAR
Contact Load Current Rating100.0 MILLIAMPERES RESISTIVE LOAD DC AT ALTITUDE
Contact Load Current Rating50.0 MILLIAMPERES RESISTIVE LOAD AC AT ALTITUDE
Mounting MethodTHREADED BUSHING SINGLE MOUNTING FACILITY
Shaft Length0.375 INCHES NOMINAL SINGLE ACTUATOR IN
Contact Voltage Rating in Volts115.0 AC AT ALTITUDE
Switch Actuator Indexing Position Quantity6 SINGLE ACTUATOR
Operating Temp Range-65.0 TO 85.0 CELSIUS DEGC
Throw Quantity6 EACH SECTION REAR
Thread Length0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN
Flat Height0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM SINGLE ACTUATOR IN
Thread Class2A SINGLE MOUNTING FACILITY A
Nonturn Device Radius0.375 INCHES NOMINAL AT 5:00 OCLOCK IN
Pole Quantity1 EACH SECTION REAR
Shaft Flat/slot Angular Location240.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR
Switch Contact Basic DesignNONPILE-UP SYMMETRICAL
Lifecycle & Compliance
Acquisition StatusACTIVE
HAZMATNo
Verified Substitutes 11
7530-00-286-6971STYLE194-PLAIN INTERCHANGEABLE
Envelope,mailing
Bowers Envelope Company, Inc.
6730-00-341-7847 INTERCHANGEABLE
Plunger,film Shoe P
7530-00-577-4849STYLE87-5 INTERCHANGEABLE
Envelope,mailing
Bowers Envelope Company, Inc.
5815-00-784-8869SM-C-321600 INTERCHANGEABLE
Cam Assembly
Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir
5330-00-955-967711928 INTERCHANGEABLE
Gasket
Schneider Electric Systems Usa Inc
3920-00-972-74968032500 INTERCHANGEABLE
Truck,hand
Labconco Corp
5999-01-048-458611928 INTERCHANGEABLE
Delay Line
Stanford Applied Engineering Inc
5310-01-215-523311928 INTERCHANGEABLE
Washer,flat
Dana Off Highway Products, Llc
5330-01-435-71291192-8 INTERCHANGEABLE
Gasket
Insinger Machine Co
5930-01-495-192511928 INTERCHANGEABLE
Switch,rotary
Science Applications International Corporation
Cross-Reference Index
Part NumberManufacturer
269940-A2 Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch (USA)
11928 PRIMARY Drs Advanced Isr, Llc (USA)
Related Parts
7530-00-286-6971INTERCHANGEABLE
ENVELOPE,MAILING
STYLE194-PLAIN
6730-00-341-7847INTERCHANGEABLE
PLUNGER,FILM SHOE P
7530-00-577-4849INTERCHANGEABLE
ENVELOPE,MAILING
STYLE87-5
5815-00-784-8869INTERCHANGEABLE
CAM ASSEMBLY
SM-C-321600
5330-00-955-9677INTERCHANGEABLE
GASKET
11928
3920-00-972-7496INTERCHANGEABLE
TRUCK,HAND
8032500
5999-01-048-4586INTERCHANGEABLE
DELAY LINE
11928
5310-01-215-5233INTERCHANGEABLE
WASHER,FLAT
11928
5330-01-435-7129INTERCHANGEABLE
GASKET
1192-8
5930-01-495-1925INTERCHANGEABLE
SWITCH,ROTARY
11928
5120-01-532-2337INTERCHANGEABLE
EXTENSION,SOCKET WRENCH

Frequently Asked Questions

What is NSN 5930-00-194-9110?

NSN 5930-00-194-9110 is a Switch,rotary, manufactured by Drs Advanced Isr, Llc, classified under FSC 5930 (No Item Name Available). Status: active.

What are the part numbers for NSN 5930-00-194-9110?

NSN 5930-00-194-9110 has 2 cross-referenced part numbers: 269940-A2 (Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch), 11928 (Drs Advanced Isr, Llc).

What NSN replaces 5930-00-194-9110?

There are 11 known substitutes for 5930-00-194-9110: 7530-00-286-6971, 6730-00-341-7847, 7530-00-577-4849 and 8 more. Verify interchangeability with system specifications before substitution.

What are the specifications of 11928?

Key specifications for 11928: Thread Series Designator: UNEF SINGLE MOUNTING FACILITY; Contact Load Current Rating: 200.0 MILLIAMPERES RESISTIVE LOAD AND 20.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL; Contact Load Current Rating: 100.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL; Nominal Thread Size: 0.375 INCHES SINGLE MOUNTING FACILITY IN. 30 total characteristics are documented in the Federal Logistics Information System.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com