The Switch,rotary, cataloged under National Stock Number 5930-00-151-4688, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is L3 Technologies, Inc. Div Communication Systems-East. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-00-151-4688 |
| Primary Part Number | 2188293-1 |
| Item Name | Switch,rotary |
| FSC / FSG | 5930 / 59 — Switches |
| Manufacturer | L3 Technologies, Inc. Div Communication Systems-East |
| Status | ACTIVE |
| Shaft Type | ROUND, FLATTED SINGLE ACTUATOR |
| Shaft Diameter | 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Switch Contact Basic Design | NONPILE-UP SYMMETRICAL |
| Terminal Type | TAB, SOLDER LUG |
| Overall Diameter | 1.100 INCHES NOMINAL IN |
| First Flat Length | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Rotor Through Connection Quantity | 3 EACH SECTION |
| Contact Load Current Rating | 1.0 AMPERES RESISTIVE LOAD AND 500.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| Contact Load Current Rating | 2.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| Mounting Method | THREADED BUSHING SINGLE MOUNTING FACILITY |
| Thread Length | 0.417 INCHES MINIMUM AND 0.457 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN |
| Pole Quantity | 3 EACH SECTION FRONT |
| Style Designator | TAP, CIRCULAR, BUSHING MOUNT |
| Switch Actuator Momentary Position | CLOCKWISE SINGLE ACTUATOR |
| Individual Section Quantity | 8 |
| Nonturn Device Type | SLOTTED BUSHING AT 3:00 OCLOCK |
| Nominal Thread Size | 0.375 INCHES SINGLE MOUNTING FACILITY IN |
| Shaft Length | 0.834 INCHES MINIMUM AND 0.914 INCHES MAXIMUM SINGLE ACTUATOR IN |
| Switch Actuator Stop Device Type | FIXED STOP SINGLE ACTUATOR |
| Contact Switching Action | BREAKS BEFORE MAKES EACH SECTION REAR |
| Contact Voltage Rating in Volts | 115.0 AC AT SEA LEVEL |
| Contact Voltage Rating in Volts | 28.0 DC AT SEA LEVEL |
| Operating Temp Range | -55.0 TO 125.0 CELSIUS DEGC |
| Thread Class | 2A SINGLE MOUNTING FACILITY A |
| Test Data Document | 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Switch Actuator Positioning Increment | 30.0 DEGREES SINGLE ACTUATOR |
| Switch Actuator Indexing Position Quantity | 4 SINGLE ACTUATOR |
| Thread Series Designator | UNEF SINGLE MOUNTING FACILITY |
| Shaft Flat/slot Angular Location | 180.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 2188293-1 PRIMARY | L3 Technologies, Inc. Div Communication Systems-East (USA) |
| Reference | Meaning |
|---|---|
| 2188293-1 | 5/9 Secondary reference Lockheed Martin Corporation Dba Lockheed Martin Div Lockheed Martin |
| 54-1905-1 | 5/2 Secondary reference U.S. Government activity |
NSN 5930-00-151-4688 is a Switch,rotary, manufactured by L3 Technologies, Inc. Div Communication Systems-East, classified under FSC 5930, Switches. Status: active.
NSN 5930-00-151-4688 has 1 manufacturer part number on file: 2188293-1 (L3 Technologies, Inc. Div Communication Systems-East).
Key specifications for 2188293-1: Shaft Type: ROUND, FLATTED SINGLE ACTUATOR; Shaft Diameter: 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM SINGLE ACTUATOR IN; Switch Contact Basic Design: NONPILE-UP SYMMETRICAL; Terminal Type: TAB, SOLDER LUG. 29 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.