The Switch,toggle, cataloged under National Stock Number 5930-00-105-5331, is classified within Federal Supply Class 5930 (Switches) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Jrh Electronics L.l.c.. Government technical data includes 23 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 9 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-00-105-5331 |
| Primary Part Number | MS27407-3 |
| Item Name | Switch,toggle |
| FSC / FSG | 5930 / 59 — Switches |
| Manufacturer | Jrh Electronics L.l.c. |
| Status | ACTIVE |
| Bushing Length | 0.450 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN |
| Actuator Diameter | 0.235 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN |
| Inclosure Type | FULLY INCLOSED |
| Body Style | BUSHING MOUNT |
| Actuator Style | ROUND |
| Mounting Method | THREADED BUSHING |
| Body Width | 0.910 INCHES MAXIMUM IN |
| Body Height | 0.950 INCHES MINIMUM IN |
| Mounting Surface to Terminal End Distance | 1.370 INCHES MAXIMUM IN |
| Features Provided | ACTUATOR SEAL |
| Nominal Thread Size | 0.469 INCHES IN |
| Actuator Position-Action Relationship | UP POSITION MOMENTARY AND DOWN POSITION MOMENTARY AND CENTER POSITION MAINTAINED |
| Body Length | 1.340 INCHES MAXIMUM IN |
| Nonpile-Up Contact Arrangement | 2 POLE, DOUBLE THROW, TWO POSITIONS MOMENTARY SINGLE SWITCH UNIT |
| Maximum Voltage Rating in Volts | 115.0 AC AND 28.0 DC |
| Thread Class | 2A A |
| Test Data Document | 81349-MILS3950 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 32 |
| Terminal Type and Quantity | 6 SCREW |
| Thread Series Designator | UNS |
| Actuator Height | 0.660 INCHES MINIMUM AND 0.720 INCHES MAXIMUM IN |
| Contact Load Current Rating at Maximum Rated Voltage | 18.000 AMPERES RESISTIVE DC AND 10.000 AMPERES INDUCTIVE DC AND 5.000 AMPERES LAMP DC AND 11.000 AMPERES RESISTIVE AC AND 8.000 AMPERES INDUCTIVE AC AND 2.000 AMPERES LAMP AC |
| Hazardous Locations/environmental Protection | SUBMERSIBLE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| MS27407-3 | Jrh Electronics L.l.c. (USA) |
| Reference | Meaning |
|---|---|
| 8860K9 | C/1 Advisory reference — outside the item-of-supply concept Eaton Corp Opns & Technical Center |
| 5930PL0961966 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
| 452-0835-001 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| MS25201-9 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| MS27407-3 | 2/2 Government specification standardization U.S. Government activity |
| 2TL1-72 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| MIL-DTL-3950 | 4/1 Identification reference U.S. Government activity |
| MIL-S-3950 | 5/9 Secondary reference U.S. Government activity |
| 10135269 | 6/9 Informative reference only Nimikkeistokeskus Ncb Finland |
NSN 5930-00-105-5331 is a Switch,toggle, manufactured by Jrh Electronics L.l.c., classified under FSC 5930, Switches. Status: active.
NSN 5930-00-105-5331 has 1 manufacturer part number on file: MS27407-3 (Jrh Electronics L.l.c.).
Key specifications for MS27407-3: Bushing Length: 0.450 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN; Overall Height: 2.580 INCHES MAXIMUM IN; Actuator Diameter: 0.235 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN; Inclosure Type: FULLY INCLOSED. 23 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.