PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 593-9-182
593-9-182 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 2.5000 INCHES NOMINAL IN, bore_diameter: 3.2500 INCHES NOMINAL IN, overall_width: 3.2500 INCHES NOMINAL IN, standout_width: 0.3750 INCHES NOMINAL IN, special_features: OIL GROOVE AND OIL HOLES IN CUP OD,0.004 BENCH LATERAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-413-4829, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
593-9-182
NSN: 3110-00-413-4829
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width2.5000 INCHES NOMINAL IN
bore_diameter3.2500 INCHES NOMINAL IN
overall_width3.2500 INCHES NOMINAL IN
standout_width0.3750 INCHES NOMINAL IN
special_featuresOIL GROOVE AND OIL HOLES IN CUP OD,0.004 BENCH LATERAL
style_designatorSTRAIGHT BORE, DOUBLE CUP, SINGLE CONES
cone_corner_radius0.1400 INCHES NOMINAL IN
backface_corner_radius0.0310 INCHES NOMINAL IN
overall_outside_diameter6.0000 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-413-4829
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 593-9-182 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
CUP WIDTH: 2.5000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
RETAINER FABRICATION METHOD: PRESSED
•
OVERALL OUTSIDE DIAMETER: 6.0000 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.3750 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0310 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
CUP WIDTH2.5000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
RETAINER FABRICATION METHODPRESSED
SPECIAL FEATURESOIL GROOVE AND OIL HOLES IN CUP OD,0.004 BENCH LATERAL
OVERALL OUTSIDE DIAMETER6.0000 INCHES NOMINAL IN
STANDOUT WIDTH0.3750 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0310 INCHES NOMINAL IN
BORE DIAMETER3.2500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
808Interchangeable
interchangeable cross-reference
interchangeable
78022Interchangeable
interchangeable cross-reference
interchangeable
MD2716Interchangeable
interchangeable cross-reference
interchangeable
3310-0402Interchangeable
interchangeable cross-reference
interchangeable
810AS829Interchangeable
interchangeable cross-reference
interchangeable
7802209JAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 593-9-182?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 593-9-182?
593-9-182 is a BEARING,ROLLER,TAPERED.
What parts can replace 593-9-182?
There are 9 known substitutes for 593-9-182: 808, 78022, MD2716 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 593-9-182?
593-9-182 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-413-4829. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 593-9-182

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026