PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 593-6960882PC7
593-6960882PC7 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING CASE, case_style: RECESSED, seal_width: 0.313 INCHES NOMINAL IN, outside_diameter: 2.754 INCHES NOMINAL IN, attachment_method: CEMENTED, housing_bore_diameter: 2.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-784-0335, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
593-6960882PC7
NSN: 5330-00-784-0335
FSC: 5330
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING CASE
case_styleRECESSED
seal_width0.313 INCHES NOMINAL IN
outside_diameter2.754 INCHES NOMINAL IN
attachment_methodCEMENTED
housing_bore_diameter2.750 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.875 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-784-0335
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 593-6960882PC7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 1.875 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
•
OUTSIDE DIAMETER: 2.754 INCHES NOMINAL IN
•
CASE STYLE: RECESSED
•
SEAL WIDTH: 0.313 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER1.875 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
OUTSIDE DIAMETER2.754 INCHES NOMINAL IN
CASE STYLERECESSED
SEAL WIDTH0.313 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CORROSION RESISTING CASE
ATTACHMENT METHODCEMENTED
HOUSING BORE DIAMETER2.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
18657Interchangeable
interchangeable cross-reference
interchangeable
20804Interchangeable
interchangeable cross-reference
interchangeable
H1004Interchangeable
interchangeable cross-reference
interchangeable
275128Interchangeable
interchangeable cross-reference
interchangeable
49476Interchangeable
interchangeable cross-reference
interchangeable
0S1875Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 593-6960882PC7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 593-6960882PC7?
593-6960882PC7 is a SEAL,PLAIN ENCASED.
What parts can replace 593-6960882PC7?
There are 18 known substitutes for 593-6960882PC7: 18657, 20804, H1004 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 593-6960882PC7?
593-6960882PC7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-784-0335. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 593-6960882PC7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026