PartsTable
Technical Data Sheet
Download PDF

593-6960318 PC 4 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

593-6960318 PC 4: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.720 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN, thread_length: 0.391 INCHES MINIMUM IN, fastener_length: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-447-3372, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
593-6960318 PC 4
NSN: 5305-01-447-3372
FSC: 5305 — Screws
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 316 OVERALL
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.720 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
thread_length0.391 INCHES MINIMUM IN
fastener_length0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
width_across_flats0.219 INCHES NOMINAL IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.375 INCHES IN
thread_quantity_per_inch16
NSN5305-01-447-3372
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 593-6960318 PC 4 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.219 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
THREAD LENGTH: 0.391 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
INTERNAL DRIVE STYLE: HEXAGON
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.219 INCHES NOMINAL IN
FASTENER LENGTH0.750 INCHES NOMINAL IN
THREAD LENGTH0.391 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLEHEXAGON
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
THREAD CLASS3A A
THREAD QUANTITY PER INCH16
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
0.375-16UNC-3A X 0.750 316 CRESReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 593-6960318 PC 4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 593-6960318 PC 4?
593-6960318 PC 4 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 593-6960318 PC 4?
There is 1 known substitute for 593-6960318 PC 4: 0.375-16UNC-3A X 0.750 316 CRES. Substitute compatibility should be verified for your specific system.
What is the NSN for 593-6960318 PC 4?
593-6960318 PC 4 is cataloged in the U.S. Government catalog under NSN 5305-01-447-3372. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 593-6960318 PC 4