PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 593-522-1862329PC10
593-522-1862329PC10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include peripheral_diameter: 2.617 INCHES MINIMUM AND 2.673 INCHES MAXIMUM IN, center_hole_diameter: 2.215 INCHES MINIMUM AND 2.235 INCHES MAXIMUM IN, elongation_percentage: 164 MAXIMUM, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-640-9476, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
593-522-1862329PC10
NSN: 5330-00-640-9476
FSC: 5330
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
peripheral_diameter2.617 INCHES MINIMUM AND 2.673 INCHES MAXIMUM IN
center_hole_diameter2.215 INCHES MINIMUM AND 2.235 INCHES MAXIMUM IN
elongation_percentage164 MAXIMUM
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
NSN5330-00-640-9476
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 593-522-1862329PC10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 2.617 INCHES MINIMUM AND 2.673 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.215 INCHES MINIMUM AND 2.235 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 164 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER2.617 INCHES MINIMUM AND 2.673 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.215 INCHES MINIMUM AND 2.235 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
ELONGATION PERCENTAGE164 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
JA1S-A3-A-1-2Interchangeable
interchangeable cross-reference
interchangeable
546804Interchangeable
interchangeable cross-reference
interchangeable
11242Interchangeable
interchangeable cross-reference
interchangeable
188-8Interchangeable
IBM 139GB 15k RPM SAS SFF-1 HDD
interchangeable
148099Interchangeable
interchangeable cross-reference
interchangeable
0903631Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 593-522-1862329PC10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 593-522-1862329PC10?
593-522-1862329PC10 is a PACKING,PREFORMED.
What parts can replace 593-522-1862329PC10?
There are 33 known substitutes for 593-522-1862329PC10: JA1S-A3-A-1-2, 546804, 11242 and 30 more. Substitute compatibility should be verified for your specific system.
Is 593-522-1862329PC10 still available?
593-522-1862329PC10 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 593-522-1862329PC10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026