PartsTable
Technical Data Sheet
Download PDF

593-123-1862195PC19 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

593-123-1862195PC19: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL, peripheral_diameter: 1.625 INCHES NOMINAL IN, center_hole_diameter: 1.375 INCHES NOMINAL IN, cross-sectional_height: 0.125 INCHES NOMINAL IN, cross-sectional_shape_style: SPECIAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-582-4848, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
593-123-1862195PC19
NSN: 5330-00-582-4848
FSC: 5330 — Packing and Gasket Materials
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
peripheral_diameter1.625 INCHES NOMINAL IN
center_hole_diameter1.375 INCHES NOMINAL IN
cross-sectional_height0.125 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIAL
NSN5330-00-582-4848
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 593-123-1862195PC19 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 1.625 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.375 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER1.625 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.375 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 9
593-123-1862193RBPC9Reference document
Same NSN cross-reference
Reference document — Secondary reference
534-123-62PC213Reference document
Same NSN cross-reference
Reference document — Secondary reference
73682-72X2PC31Reference document
Same NSN cross-reference
Reference document — Secondary reference
603-4-123-1989199PC213Reference document
Same NSN cross-reference
Reference document — Secondary reference
9863-004X7PC22Reference document
Same NSN cross-reference
Reference document — Secondary reference
MRQ1Q25Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 593-123-1862195PC19?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 593-123-1862195PC19?
593-123-1862195PC19 is a PACKING,PREFORMED.
What parts can replace 593-123-1862195PC19?
There are 9 known substitutes for 593-123-1862195PC19: 593-123-1862193RBPC9, 534-123-62PC213, 73682-72X2PC31 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 593-123-1862195PC19?
593-123-1862195PC19 is cataloged in the U.S. Government catalog under NSN 5330-00-582-4848. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 593-123-1862195PC19

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.