PartsTable
Technical Data Sheet
PartsTable / O-RING / 5926-001
5926-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,WAVEGUIDE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY SINGLE COUPLING, seal_thickness: 0.125 INCHES NOMINAL IN, outside_diameter: 1.864 INCHES MINIMUM AND 1.910 INCHES MAXIMUM IN, style_designator: FOR RECTANGULAR WAVEGUIDE AND FLANGE, seal_inside_width: 1.150 INCHES NOMINAL IN, seal_inside_height: 0.630 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-171-6649, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5926-001
NSN: 5331-00-171-6649
FSC: 5331 — O-RING
CAGE: H6394 — HYCOM B.V. (NLD)
SPECIFICATIONS
materialALUMINUM ALLOY SINGLE COUPLING
seal_thickness0.125 INCHES NOMINAL IN
outside_diameter1.864 INCHES MINIMUM AND 1.910 INCHES MAXIMUM IN
style_designatorFOR RECTANGULAR WAVEGUIDE AND FLANGE
seal_inside_width1.150 INCHES NOMINAL IN
seal_inside_height0.630 INCHES NOMINAL IN
seal_outside_width1.880 INCHES NOMINAL IN
seal_outside_height1.880 INCHES NOMINAL IN
center_hole_diameter1.599 INCHES MINIMUM AND 1.619 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identificationAN/TSQ-96
NSN5331-00-171-6649
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5926-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.864 INCHES MINIMUM AND 1.910 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 1.599 INCHES MINIMUM AND 1.619 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.864 INCHES MINIMUM AND 1.910 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER1.599 INCHES MINIMUM AND 1.619 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
17-6796-060-100Interchangeable
interchangeable cross-reference
interchangeable
65S27162Interchangeable
interchangeable cross-reference
interchangeable
F224M2Z8Interchangeable
interchangeable cross-reference
interchangeable
SP62301Interchangeable
interchangeable cross-reference
interchangeable
8448628Interchangeable
interchangeable cross-reference
interchangeable
10050179548Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5926-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5926-001?
5926-001 is a SEAL,WAVEGUIDE.
What parts can replace 5926-001?
There are 25 known substitutes for 5926-001: 17-6796-060-100, 65S27162, F224M2Z8 and 22 more. Substitute compatibility should be verified for your specific system.
Is 5926-001 still available?
5926-001 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5926-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026