The Circuit Breaker, cataloged under National Stock Number 5925-01-497-1097, is classified within Federal Supply Class 5925 (Circuit Breakers) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 10 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5925-01-497-1097 |
| Item Name | Circuit Breaker |
| FSC / FSG | 5925 / 59 — Circuit Breakers |
| Status | ACTIVE |
| Bushing Length | 0.332 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN |
| Reset Method | MANUAL |
| Internal Trip Release Configuration | SERIES TRIP SINGLE LOCATION |
| Operating Voltage Type and Rating Per Pole in Volts | 240.0 AC AND 50.0 DC SINGLE LOCATION |
| Mounting Facility Type and Quantity | 1 THREADED BUSHING WITH PANEL SEAL |
| Actuator Position Designation | AT EACH POLE |
| Frequency in Hertz | 60.0 OR 400.0 SINGLE LOCATION |
| Body Style | SINGLE POLE TYPE |
| Ultimate Trip Rating of Continuous Current Rating Per Pole in Percent | 800.0 SINGLE LOCATION |
| Switch Location and Position Designation | INTERNAL AT POLE ONE |
| Circuit Protection Type | OVERCURRENT SINGLE LOCATION |
| Body Width | 0.625 INCHES MAXIMUM IN |
| Pole Quantity | 1 |
| Mounting Surface to Terminal End Distance | 1.810 INCHES MAXIMUM IN |
| Maximum Continuous Load Current Rating Per Pole | 1.5 AMPERES AC SINGLE LOCATION |
| Trip Release Characteristic | TIME DELAY SINGLE LOCATION |
| Maximum Interrupting Capacity Current Type and Rating Per Pole in Amps | 300.0 AC AND 500.0 DC SINGLE LOCATION |
| Nominal Thread Size | 0.375 INCHES IN |
| Specification/standard Data | 81349-MIL-C-39019/2 GOVERNMENT SPECIFICATION |
| Body Length | 1.562 INCHES MAXIMUM IN |
| Trip Delay Time in Seconds Per Rated Continuous Current | 0.055 MINIMUM AT 200 PCT AND 0.950 MAXIMUM AT 200 PCT AND 0.240 MAXIMUM AT 400 PCT AND 0.060 MAXIMUM AT 800 PCT SINGLE LOCATION |
| Manual Actuator Type and Quantity | 1 TOGGLE |
| Inclosure Protection Type for Which Designed | CORROSION RESISTANT AND FUNGUS RESISTANT AND HERMETICALLY SEALED |
| Test Data Document | 81349-MIL-C-39019 SPECIFICATION SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Switch Contact Arrangement | SINGLE POLE, SINGLE THROW, NORMALLY CLOSED |
| Thread Quantity Per Inch | 32 |
| Actuator Function | TRIP-RESET |
| Trip Release Ambient Temp Rating | 23.0 CELSIUS MINIMUM AND 27.0 CELSIUS MAXIMUM SINGLE LOCATION DEGC |
| Terminal Type and Quantity | 2 SCREW |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MIL-PRF-39019/2 | 4/1 Identification reference U.S. Government activity |
| H851-2001-95 | 5/1 Secondary reference U.S. Government activity |
| M39019/02-263S | 2/2 Government specification standardization U.S. Government activity |
| MIL-PRF-39014/2 | 5/9 Secondary reference U.S. Government activity |
| 462-7068566-95 | 5/1 Secondary reference Naval Sea Systems Command |
| 7068566 | D/9 Drawing number reference only Naval Sea Systems Command |
NSN 5925-01-497-1097 is a Circuit Breaker, classified under FSC 5925, Circuit Breakers. Status: active.
10 possible matches (shared part number, not a government interchangeability claim): 5925-01-497-1175, 5925-01-497-1180, 5925-01-497-1625. Verify interchangeability with system specifications before substitution.
Key specifications for 5925-01-497-1097: Bushing Length: 0.332 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN; Reset Method: MANUAL; Internal Trip Release Configuration: SERIES TRIP SINGLE LOCATION; Operating Voltage Type and Rating Per Pole in Volts: 240.0 AC AND 50.0 DC SINGLE LOCATION. 29 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.