PartsTable TECHNICAL DATA SHEET
NSN 5925-01-361-1525Government record, cited

Circuit Breaker5925-01-361-1525

NSN 5925-01-361-1525 · NIIN 013611525 · Part number MS26574-D1
Sae International Dba Sae International · FSC 5925 — Circuit Breakers · FSG 59 — Electrical and Electronic Equipment Components · CAGE 0U583
Government record, cited
NSN 5925-01-361-1525 — this item is cataloged by the U.S. Government under National Stock Number 5925-01-361-1525. Manufacturer of record part number: MS26574-D1.
Also searched as  5925-01-361-1525 · 5925013611525 · NIIN 013611525 · 01-361-1525 · FSC 5925 Circuit Breakers · CAGE 0U583 · MS26574-D1 · MIL-C-5809 · AS26574 · AS58091 · AS58091
Nearby stock numbers  ·
Features
  • Circuit Breaker — FSC 5925
  • Bushing Length: 0.250 INCHES NOMINAL IN
  • Reset Method: MANUAL
  • Internal Trip Release Configuration: SERIES TRIP SINGLE LOCATION
  • Operating Voltage Type and Rating Per Pole in Volts: 115.0 AC SINGLE LOCATION
  • Mounting Facility Type and Quantity: 1 THREADED BUSHING WITH PANEL SEAL
  • Actuator Position Designation: AT POLE ONE
  • Frequency in Hertz: 400.0 SINGLE LOCATION
Identification
  • NSN: 5925-01-361-1525
  • NIIN: 013611525
  • FSC: 5925 — Circuit Breakers
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: MS26574-D1
  • Manufacturer: Sae International Dba Sae International
General Description

The Circuit Breaker, cataloged under National Stock Number 5925-01-361-1525, is classified within Federal Supply Class 5925 (Circuit Breakers) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 7 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5925-01-361-1525
Primary Part NumberMS26574-D1
Item NameCircuit Breaker
FSC / FSG5925 / 59 — Circuit Breakers
ManufacturerSae International Dba Sae International
StatusACTIVE
Bushing Length0.250 INCHES NOMINAL IN
Reset MethodMANUAL
Internal Trip Release ConfigurationSERIES TRIP SINGLE LOCATION
Operating Voltage Type and Rating Per Pole in Volts115.0 AC SINGLE LOCATION
Mounting Facility Type and Quantity1 THREADED BUSHING WITH PANEL SEAL
Actuator Position DesignationAT POLE ONE
Frequency in Hertz400.0 SINGLE LOCATION
Unpackaged Unit Weight0.066 POUNDS NOMINAL LBS
Fragility FactorMODERATELY RUGGED
Body StyleSINGLE POLE TYPE
Ultimate Trip Rating of Continuous Current Rating Per Pole in Percent150.0 SINGLE LOCATION
Circuit Protection TypeOVERCURRENT SINGLE LOCATION
Body Width0.539 INCHES MAXIMUM IN
Storage TypeGENERAL PURPOSE WAREHOUSE
Pole Quantity1
Mounting Surface to Terminal End Distance1.525 INCHES MAXIMUM IN
Maximum Continuous Load Current Rating Per Pole1.0 AMPERES AC SINGLE LOCATION
Trip Release CharacteristicTIME DELAY SINGLE LOCATION
Maximum Interrupting Capacity Current Type and Rating Per Pole in Amps800.0 AC SINGLE LOCATION
Nominal Thread Size0.438 INCHES IN
Specification/standard Data81349-MIL-C-5809 GOVERNMENT SPECIFICATION
Body Length0.780 INCHES MAXIMUM IN
Trip Delay Time in Seconds Per Rated Continuous Current2.000 MINIMUM AT 200 PCT AND 20.000 MAXIMUM AT 200 PCT SINGLE LOCATION
Manual Actuator Type and Quantity1 PUSH-PULL
Inclosure Protection Type for Which DesignedCORROSION RESISTANT AND DUSTPROOF AND EXPLOSION PROOF AND FUNGUS RESISTANT AND MOISTURE RESISTANT AND SAND RESISTANT AND VIBRATION RESISTANT
Test Data Document96906-MS26574 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
Thread Quantity Per Inch32
MaterialPLASTIC CASE
Actuator FunctionTRIP-RESET
Trip Release Ambient Temp Rating25.0 CELSIUS NOMINAL SINGLE LOCATION DEGC
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
MS26574-D1 PRIMARY Sae International Dba Sae International (USA)
Reference documents
ReferenceMeaning
MIL-C-5809 5/9 Secondary reference
U.S. Government activity
AS26574 5/9 Secondary reference
U.S. Government activity
AS58091 5/9 Secondary reference
U.S. Government activity
AS58091 3/1 Design control — primary reference
Sae International Dba Sae International
MS26574-D1 5/9 Secondary reference
U.S. Government activity
MS26574-D1 5/9 Secondary reference
U.S. Government activity
AS26574 3/1 Design control — primary reference
Sae International Dba Sae International

Frequently Asked Questions

What is NSN 5925-01-361-1525?

NSN 5925-01-361-1525 is a Circuit Breaker, manufactured by Sae International Dba Sae International, classified under FSC 5925, Circuit Breakers. Status: active.

What part numbers are listed for NSN 5925-01-361-1525?

NSN 5925-01-361-1525 has 1 manufacturer part number on file: MS26574-D1 (Sae International Dba Sae International).

What are the specifications of MS26574-D1?

Key specifications for MS26574-D1: Bushing Length: 0.250 INCHES NOMINAL IN; Reset Method: MANUAL; Internal Trip Release Configuration: SERIES TRIP SINGLE LOCATION; Operating Voltage Type and Rating Per Pole in Volts: 115.0 AC SINGLE LOCATION. 30 specifications are documented in the U.S. Government catalog.

Is NSN 5925-01-361-1525 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com