PartsTable TECHNICAL DATA SHEET
NSN 5925-01-344-7488Government record, cited

Circuit Breaker5925-01-344-7488

NSN 5925-01-344-7488 · NIIN 013447488 · Part number 6752-330-5
Carver Supply Inc. · FSC 5925 — Circuit Breakers · FSG 59 — Electrical and Electronic Equipment Components · CAGE 8R659
Government record, cited
NSN 5925-01-344-7488 — this item is cataloged by the U.S. Government under National Stock Number 5925-01-344-7488. Manufacturer of record part number: 6752-330-5.
Also searched as  5925-01-344-7488 · 5925013447488 · NIIN 013447488 · 01-344-7488 · FSC 5925 Circuit Breakers · CAGE 8R659 · 6752-330-5 · MS21984-5 · MIL-C-5809
Nearby stock numbers  ·
Features
  • Circuit Breaker — FSC 5925
  • Bushing Length: 0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
  • Reset Method: MANUAL
  • Operating Voltage Type and Rating Per Pole in Volts: 120.0 AC ALL LOCATIONS
  • Mounting Facility Type and Quantity: 6 THREADED HOLE(S)
  • Actuator Position Designation: AT POLE TWO
  • Frequency in Hertz: 400.0 ALL LOCATIONS
  • Unpackaged Unit Weight: 0.650 POUNDS NOMINAL LBS
Identification
  • NSN: 5925-01-344-7488
  • NIIN: 013447488
  • FSC: 5925 — Circuit Breakers
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 6752-330-5
  • Manufacturer: Carver Supply Inc.
General Description

The Circuit Breaker, cataloged under National Stock Number 5925-01-344-7488, is classified within Federal Supply Class 5925 (Circuit Breakers) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Carver Supply Inc.. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5925-01-344-7488
Primary Part Number6752-330-5
Item NameCircuit Breaker
FSC / FSG5925 / 59 — Circuit Breakers
ManufacturerCarver Supply Inc.
StatusACTIVE
Bushing Length0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
Reset MethodMANUAL
Operating Voltage Type and Rating Per Pole in Volts120.0 AC ALL LOCATIONS
Mounting Facility Type and Quantity6 THREADED HOLE(S)
Actuator Position DesignationAT POLE TWO
Frequency in Hertz400.0 ALL LOCATIONS
Unpackaged Unit Weight0.650 POUNDS NOMINAL LBS
Center to Center Distance Between Terminals Parallel to Width1.500 INCHES NOMINAL IN
Fragility FactorMODERATELY RUGGED
Body StyleMULTIPOLE-MULTIPLE ACTUATOR TYPE
Ultimate Trip Rating of Continuous Current Rating Per Pole in Percent138.0 ALL LOCATIONS
Circuit Protection TypeOVERCURRENT ALL LOCATIONS
Body Width2.270 INCHES MAXIMUM IN
Storage TypeGENERAL PURPOSE WAREHOUSE
Pole Quantity3
Mounting Surface to Terminal End Distance2.370 INCHES NOMINAL IN
Maximum Continuous Load Current Rating Per Pole5.0 AMPERES AC ALL LOCATIONS
Trip Release CharacteristicTIME DELAY ALL LOCATIONS
Maximum Interrupting Capacity Current Type and Rating Per Pole in Amps5000.0 AC ALL LOCATIONS
Nominal Thread Size0.138 INCHES IN
Body Length2.200 INCHES MAXIMUM IN
Trip Delay Time in Seconds Per Rated Continuous Current10.000 MINIMUM AT 200 PCT AND 70.000 MAXIMUM AT 200 PCT ALL LOCATIONS
Manual Actuator Type and Quantity1 PUSH BUTTON
Inclosure Protection Type for Which DesignedCORROSION RESISTANT AND HUMIDITY RESISTANT AND SHOCK RESISTANT AND HERMETICALLY SEALED
Thread Quantity Per Inch32
Actuator FunctionTRIP-RESET
Trip Release Ambient Temp Rating77.0 FAHRENHEIT NOMINAL ALL LOCATIONS DEGF
Terminal Type and Quantity6 TAB W/SCREW
Special Handling FeatureMAGNETIC
Main Contact Tripping Mechanism TypeTRIP FREE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
6752-330-5 Carver Supply Inc. (USA)
Reference documents
ReferenceMeaning
6752-330-5 3/2 Design control — primary reference
U.S. Government activity
MS21984-5 5/9 Secondary reference
U.S. Government activity
MIL-C-5809 5/9 Secondary reference
U.S. Government activity

Frequently Asked Questions

What is NSN 5925-01-344-7488?

NSN 5925-01-344-7488 is a Circuit Breaker, manufactured by Carver Supply Inc., classified under FSC 5925, Circuit Breakers. Status: active.

What part numbers are listed for NSN 5925-01-344-7488?

NSN 5925-01-344-7488 has 1 manufacturer part number on file: 6752-330-5 (Carver Supply Inc.).

What are the specifications of 6752-330-5?

Key specifications for 6752-330-5: Bushing Length: 0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Reset Method: MANUAL; Operating Voltage Type and Rating Per Pole in Volts: 120.0 AC ALL LOCATIONS; Mounting Facility Type and Quantity: 6 THREADED HOLE(S). 30 specifications are documented in the U.S. Government catalog.

Is NSN 5925-01-344-7488 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com