PartsTable TECHNICAL DATA SHEET
NSN 5925-01-315-8874Government record, cited

Circuit Breaker5925-01-315-8874

NSN 5925-01-315-8874 · NIIN 013158874 · Part number MS24510-B-7-1/2
Sae International Dba Sae International · FSC 5925 — Circuit Breakers · FSG 59 — Electrical and Electronic Equipment Components · CAGE 0U583
Government record, cited
NSN 5925-01-315-8874 — this item is cataloged by the U.S. Government under National Stock Number 5925-01-315-8874. Manufacturer of record part number: MS24510-B-7-1/2.
Also searched as  5925-01-315-8874 · 5925013158874 · NIIN 013158874 · 01-315-8874 · FSC 5925 Circuit Breakers · CAGE 0U583 · MS24510-B-7-1/2 · AS58091 · MS24510-B7-1/2 · AS24510 · MIL-C-5809
Nearby stock numbers  ·
Features
  • Circuit Breaker — FSC 5925
  • Bushing Length: 0.344 INCHES NOMINAL IN
  • Reset Method: MANUAL
  • Internal Trip Release Configuration: SERIES TRIP SINGLE LOCATION
  • Operating Voltage Type and Rating Per Pole in Volts: 115.0 AC AND 28.0 DC SINGLE LOCATION
  • Mounting Facility Type and Quantity: 2 THREADED HOLE(S)
  • Actuator Position Designation: AT POLE ONE
  • Frequency in Hertz: 400.0 SINGLE LOCATION
Identification
  • NSN: 5925-01-315-8874
  • NIIN: 013158874
  • FSC: 5925 — Circuit Breakers
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: MS24510-B-7-1/2
  • Manufacturer: Sae International Dba Sae International
General Description

The Circuit Breaker, cataloged under National Stock Number 5925-01-315-8874, is classified within Federal Supply Class 5925 (Circuit Breakers) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 10 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5925-01-315-8874
Primary Part NumberMS24510-B-7-1/2
Item NameCircuit Breaker
FSC / FSG5925 / 59 — Circuit Breakers
ManufacturerSae International Dba Sae International
StatusACTIVE
Bushing Length0.344 INCHES NOMINAL IN
Reset MethodMANUAL
Internal Trip Release ConfigurationSERIES TRIP SINGLE LOCATION
Operating Voltage Type and Rating Per Pole in Volts115.0 AC AND 28.0 DC SINGLE LOCATION
Mounting Facility Type and Quantity2 THREADED HOLE(S)
Actuator Position DesignationAT POLE ONE
Frequency in Hertz400.0 SINGLE LOCATION
Unpackaged Unit Weight0.078 POUNDS NOMINAL LBS
Fragility FactorMODERATELY RUGGED
Body StyleSINGLE POLE TYPE
Ultimate Trip Rating of Continuous Current Rating Per Pole in Percent138.0 SINGLE LOCATION
Distance Between Centerlines of Mounting Facilities Parallel to Body Length1.802 INCHES MINIMUM AND 1.822 INCHES MAXIMUM IN
Circuit Protection TypeOVERCURRENT SINGLE LOCATION
Body Width0.750 INCHES MAXIMUM IN
Storage TypeGENERAL PURPOSE WAREHOUSE
Pole Quantity1
Mounting Surface to Terminal End Distance1.343 INCHES MAXIMUM IN
Maximum Continuous Load Current Rating Per Pole7.5 AMPERES AC AND 7.5 AMPERES DC SINGLE LOCATION
Trip Release CharacteristicTIME DELAY SINGLE LOCATION
Maximum Interrupting Capacity Current Type and Rating Per Pole in Amps3500.0 AC AND 3500.0 DC SINGLE LOCATION
Nominal Thread Size0.138 INCHES IN
Specification/standard Data96906-MS24510 GOVERNMENT STANDARD
Body Length2.187 INCHES MAXIMUM IN
Trip Delay Time in Seconds Per Rated Continuous Current10.000 MINIMUM AT 200 PCT AND 70.000 MAXIMUM AT 200 PCT SINGLE LOCATION
Manual Actuator Type and Quantity1 PUSH-PULL
Inclosure Protection Type for Which DesignedCORROSION RESISTANT AND DUSTTIGHT AND EXPLOSION PROOF AND SAND RESISTANT AND SHOCKPROOF AND VIBRATION RESISTANT AND MOISTURE RESISTANT
Test Data Document81349-MIL-C-5809 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch32
Actuator FunctionTRIP-RESET
Trip Release Ambient Temp Rating25.0 CELSIUS NOMINAL SINGLE LOCATION DEGC
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5925-01-315-8875MS24510-B-15 POSSIBLE MATCH
CIRCUIT BREAKER
Possible match (shared part number)Sae International Dba Sae International
Cross-Reference Index
Part NumberManufacturer
MS24510-B-7-1/2 PRIMARY Sae International Dba Sae International (USA)
Reference documents
ReferenceMeaning
MS24510-B-7-1/2 5/1 Secondary reference
U.S. Government activity
AS58091 5/9 Secondary reference
U.S. Government activity
MS24510-B7-1/2 5/9 Secondary reference
U.S. Government activity
AS24510 5/9 Secondary reference
U.S. Government activity
MIL-C-5809 5/9 Secondary reference
U.S. Government activity
AS58091 5/9 Secondary reference
Sae International Dba Sae International
D7271-3-7 5/9 Secondary reference
U.S. Government activity
SAE-AS58091 3/1 Design control — primary reference
Sae International Dba Sae International
MS24510-B-7-1/2 5/9 Secondary reference
U.S. Government activity
5925PL0838544 6/9 Informative reference only
Jednolity Indeks Materialowy - Uniform Material Index
Related Parts
5925-01-315-8875POSSIBLE MATCH
CIRCUIT BREAKER
MS24510-B-15

Frequently Asked Questions

What is NSN 5925-01-315-8874?

NSN 5925-01-315-8874 is a Circuit Breaker, manufactured by Sae International Dba Sae International, classified under FSC 5925, Circuit Breakers. Status: active.

What part numbers are listed for NSN 5925-01-315-8874?

NSN 5925-01-315-8874 has 1 manufacturer part number on file: MS24510-B-7-1/2 (Sae International Dba Sae International).

What NSN replaces 5925-01-315-8874?

1 possible match (shared part number, not a government interchangeability claim): 5925-01-315-8875. Verify interchangeability with system specifications before substitution.

What are the specifications of MS24510-B-7-1/2?

Key specifications for MS24510-B-7-1/2: Bushing Length: 0.344 INCHES NOMINAL IN; Reset Method: MANUAL; Internal Trip Release Configuration: SERIES TRIP SINGLE LOCATION; Operating Voltage Type and Rating Per Pole in Volts: 115.0 AC AND 28.0 DC SINGLE LOCATION. 30 specifications are documented in the U.S. Government catalog.

Is NSN 5925-01-315-8874 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com