The Circuit Breaker, cataloged under National Stock Number 5925-01-265-7700, is classified within Federal Supply Class 5925 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Federal Specifications Promulgated by General Services Administration Washington DC. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 10 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5925-01-265-7700 |
| Primary Part Number | WC375/11-011 |
| Item Name | Circuit Breaker |
| FSC / FSG | 5925 / 59 — No Item Name Available |
| Manufacturer | Federal Specifications Promulgated by General Services Administration Washington DC |
| Status | ACTIVE |
| Thread Quantity Per Inch | 32 |
| Pole Quantity | 2 |
| Unthreaded Mounting Hole Diameter | 0.188 INCHES NOMINAL IN |
| Center to Center Distance Between Terminals Parallel to Width | 0.625 INCHES NOMINAL IN |
| Fragility Factor | MODERATELY RUGGED |
| Storage Type | GENERAL PURPOSE WAREHOUSE |
| Mounting Facility Type and Quantity | 2 THREADED HOLE(S) AND 2 UNTHREADED HOLE(S) |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Width | 0.625 INCHES NOMINAL IN |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Length | 3.000 INCHES NOMINAL IN |
| Boss Height | 0.125 INCHES NOMINAL IN |
| Center to Center Distance Between Terminals Parallel to Length | 1.190 INCHES NOMINAL IN |
| Special Handling Feature | MAGNETIC |
| Maximum Continuous Load Current Rating Per Pole | 70.0 AMPERES AC ALL LOCATIONS |
| Operating Voltage Type and Rating Per Pole in Volts | 240.0 AC ALL LOCATIONS |
| Actuator Function | TRIP-RESET |
| Nominal Thread Size | 0.138 INCHES IN |
| Terminal Type and Quantity | 4 COMPRESSION |
| Material | PLASTIC CASE |
| Trip Delay Time in Seconds Per Rated Continuous Current | 6.000 MAXIMUM AT 200 PCT ALL LOCATIONS |
| Test Data Document | 81348-W-C-375 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Ultimate Trip Rating of Continuous Current Rating Per Pole in Percent | 135.0 ALL LOCATIONS |
| Frequency in Hertz | 60.0 ALL LOCATIONS |
| Actuator Position Designation | AT POLE ONE |
| Circuit Protection Type | OVERCURRENT ALL LOCATIONS |
| Manual Actuator Type and Quantity | 1 TOGGLE |
| Reset Method | MANUAL |
| Trip Release Method | THERMAL-MAGNETIC ALL LOCATIONS |
| Specification/standard Data | 81348-W-C-375/11 GOVERNMENT SPECIFICATION |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Inclosure Protection Type for Which Designed | CORROSION RESISTANT |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| WC375/11-011 | Federal Specifications Promulgated by General Services Administration Washington DC (USA) |
| W-C-375/11 | Federal Specifications Promulgated by General Services Administration Washington DC (USA) |
NSN 5925-01-265-7700 is a Circuit Breaker, manufactured by Federal Specifications Promulgated by General Services Administration Washington DC, classified under FSC 5925 (No Item Name Available). Status: active.
NSN 5925-01-265-7700 has 2 cross-referenced part numbers: WC375/11-011 (Federal Specifications Promulgated by General Services Administration Washington DC), W-C-375/11 (Federal Specifications Promulgated by General Services Administration Washington DC).
There are 10 known substitutes for 5925-01-265-7700: 5925-00-869-6385, 5925-01-093-3388, 5925-01-107-4986 and 7 more. Verify interchangeability with system specifications before substitution.
Key specifications for WC375/11-011: Thread Quantity Per Inch: 32; Pole Quantity: 2; Unthreaded Mounting Hole Diameter: 0.188 INCHES NOMINAL IN; Center to Center Distance Between Terminals Parallel to Width: 0.625 INCHES NOMINAL IN. 30 total characteristics are documented in the Federal Logistics Information System.