The Circuit Breaker, cataloged under National Stock Number 5925-01-216-0284, is classified within Federal Supply Class 5925 (Circuit Breakers) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Lucent Technologies Inc Corporate Headquarters. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5925-01-216-0284 |
| Primary Part Number | G612834-1 |
| Item Name | Circuit Breaker |
| FSC / FSG | 5925 / 59 — Circuit Breakers |
| Manufacturer | Lucent Technologies Inc Corporate Headquarters |
| Status | ACTIVE |
| Bushing Length | 0.390 INCHES MAXIMUM IN |
| Reset Method | MANUAL |
| Internal Trip Release Configuration | SERIES TRIP FIRST LOCATION |
| Internal Trip Release Configuration | RELAY TRIP SECOND LOCATION |
| Operating Voltage Type and Rating Per Pole in Volts | 50.0 DC SECOND LOCATION |
| Operating Voltage Type and Rating Per Pole in Volts | 240.0 AC FIRST LOCATION |
| Mounting Facility Type and Quantity | 1 THREADED BUSHING WITH PANEL SEAL |
| Actuator Position Designation | BETWEEN POLE ONE AND TWO |
| Switch Terminal Type | TAB, SOLDER LUG |
| Frequency in Hertz | 60.0 FIRST LOCATION |
| Center to Center Distance Between Terminals Parallel to Width | 0.625 INCHES NOMINAL IN |
| Body Style | MULTIPOLE-SINGLE ACTUATOR TYPE |
| Switch Voltage Rating and Type in Volts | 125.0 AC AND 50.0 DC |
| Ultimate Trip Rating of Continuous Current Rating Per Pole in Percent | 115.0 ALL LOCATIONS |
| Switch Location and Position Designation | INTERNAL AT POLE TWO |
| Circuit Protection Type | OVERCURRENT ALL LOCATIONS |
| Body Width | 1.281 INCHES MAXIMUM IN |
| Storage Type | GENERAL PURPOSE WAREHOUSE |
| Pole Quantity | 2 |
| Mounting Surface to Terminal End Distance | 1.780 INCHES MAXIMUM IN |
| Maximum Continuous Load Current Rating Per Pole | 1.0 AMPERES DC SECOND LOCATION |
| Maximum Continuous Load Current Rating Per Pole | 8.0 AMPERES AC FIRST LOCATION |
| Trip Release Characteristic | TIME DELAY ALL LOCATIONS |
| Maximum Interrupting Capacity Current Type and Rating Per Pole in Amps | 500.0 DC SECOND LOCATION |
| Maximum Interrupting Capacity Current Type and Rating Per Pole in Amps | 300.0 AC FIRST LOCATION |
| Nominal Thread Size | 0.375 INCHES IN |
| Body Length | 1.562 INCHES MAXIMUM IN |
| Trip Delay Time in Seconds Per Rated Continuous Current | 0.100 MINIMUM AT 200 PCT AND 0.700 MAXIMUM AT 200 PCT SECOND LOCATION |
| Trip Delay Time in Seconds Per Rated Continuous Current | 0.700 MINIMUM AT 200 PCT AND 4.500 MAXIMUM AT 200 PCT FIRST LOCATION |
| Manual Actuator Type and Quantity | 1 TOGGLE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| G612834-1 PRIMARY | Lucent Technologies Inc Corporate Headquarters (USA) |
| Reference | Meaning |
|---|---|
| G612834-1 | 5/9 Secondary reference Lucent Technologies Inc Dba Federal Marketing Group |
| G612834-1 | C/1 Advisory reference — outside the item-of-supply concept Lucent Technologies Inc Advanced Technology Systems |
| G612834-1 | 3/9 Design control — primary reference American Telephone and Telegraph Co |
| AP41-1R-5157-1 | 5/2 Secondary reference U.S. Government activity |
NSN 5925-01-216-0284 is a Circuit Breaker, manufactured by Lucent Technologies Inc Corporate Headquarters, classified under FSC 5925, Circuit Breakers. Status: active.
NSN 5925-01-216-0284 has 1 manufacturer part number on file: G612834-1 (Lucent Technologies Inc Corporate Headquarters).
Key specifications for G612834-1: Bushing Length: 0.390 INCHES MAXIMUM IN; Reset Method: MANUAL; Internal Trip Release Configuration: SERIES TRIP FIRST LOCATION; Internal Trip Release Configuration: RELAY TRIP SECOND LOCATION. 30 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.