The Circuit Breaker, cataloged under National Stock Number 5925-01-079-3085, is classified within Federal Supply Class 5925 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Sae International Dba Sae International. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 10 commercial cross-references from 5 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5925-01-079-3085 |
| Primary Part Number | MS25244-P25 |
| Item Name | Circuit Breaker |
| FSC / FSG | 5925 / 59 — No Item Name Available |
| Manufacturer | Sae International Dba Sae International |
| Status | CANCELLED |
| Body Length | 2.189 INCHES MAXIMUM IN |
| Actuator Position Designation | AT POLE ONE |
| Manual Actuator Type and Quantity | 1 PUSH-PULL |
| Maximum Continuous Load Current Rating Per Pole | 25.0 AMPERES AC AND 25.0 AMPERES DC SINGLE LOCATION |
| Inclosure Protection Type for Which Designed | EXPLOSION RESISTANT AND MOISTURE RESISTANT |
| Trip Delay Time in Seconds Per Rated Continuous Current | 15.000 MINIMUM AT 200 PCT AND 55.000 MAXIMUM AT 200 PCT SINGLE LOCATION |
| Circuit Protection Type | OVERCURRENT SINGLE LOCATION |
| Ultimate Trip Rating of Continuous Current Rating Per Pole in Percent | 138.0 SINGLE LOCATION |
| Main Contact Tripping Mechanism Type | TRIP FREE |
| Frequency in Hertz | 400.0 SINGLE LOCATION |
| Nominal Thread Size | 0.138 INCHES IN |
| Operating Voltage Type and Rating Per Pole in Volts | 115.0 AC AND 28.0 DC SINGLE LOCATION |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Terminal Type and Quantity | 2 SCREW |
| Reset Method | MANUAL |
| Internal Trip Release Configuration | SERIES TRIP SINGLE LOCATION |
| Actuator Function | TRIP-RESET |
| Test Data Document | 81349-MIL-C-5809 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Maximum Interrupting Capacity Current Type and Rating Per Pole in Amps | 3500.0 AC AND 6000.0 DC SINGLE LOCATION |
| Trip Release Characteristic | TIME DELAY SINGLE LOCATION |
| Trip Release Method | THERMAL SINGLE LOCATION |
| Trip Release Ambient Temp Rating | 25.0 CELSIUS NOMINAL SINGLE LOCATION DEGC |
| Mounting Facility Type and Quantity | 2 THREADED HOLE(S) |
| Pole Quantity | 1 |
| Thread Quantity Per Inch | 32 |
| Mounting Surface to Terminal End Distance | 2.000 INCHES MAXIMUM IN |
| Center to Center Distance Between Terminals Parallel to Length | 0.704 INCHES NOMINAL IN |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Length | 1.812 INCHES NOMINAL IN |
| Body Width | 0.750 INCHES MAXIMUM IN |
| Body Style | SINGLE POLE TYPE |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MIL-C-5809 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MS25244-P-25 | Society of Automotive Engineers Inc (USA) |
| MS25244-P-25 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| MS25244-P25 PRIMARY | Sae International Dba Sae International (USA) |
| SAE-AS58091 | Sae International Dba Sae International (USA) |
| AS25244 | Society of Automotive Engineers Inc (USA) |
| AS58091 | Society of Automotive Engineers Inc (USA) |
| AS25244 | Sae International Dba Sae International (USA) |
| AS58091 | Sae International Dba Sae International (USA) |
| 870SS0156 | Leonardo S.p.a. - Electronics Division - Defence Business Area (ITA) |
NSN 5925-01-079-3085 is a Circuit Breaker, manufactured by Sae International Dba Sae International, classified under FSC 5925 (No Item Name Available). Status: cancelled.
NSN 5925-01-079-3085 has 10 cross-referenced part numbers: MIL-C-5809 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MS25244-P-25 (Society of Automotive Engineers Inc), MS25244-P-25 (Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M), MS25244-P25 (Sae International Dba Sae International), SAE-AS58091 (Sae International Dba Sae International) and 5 more.
There are 12 known substitutes for 5925-01-079-3085: 5925-00-681-4952, 5925-00-682-4015, 5925-00-686-3297 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for MS25244-P25: Body Length: 2.189 INCHES MAXIMUM IN; Actuator Position Designation: AT POLE ONE; Manual Actuator Type and Quantity: 1 PUSH-PULL; Maximum Continuous Load Current Rating Per Pole: 25.0 AMPERES AC AND 25.0 AMPERES DC SINGLE LOCATION. 30 total characteristics are documented in the Federal Logistics Information System.
NSN 5925-01-079-3085 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.