PartsTable TECHNICAL DATA SHEET
NSN 5925-01-078-2374Government record, cited

Circuit Breaker5925-01-078-2374

NSN 5925-01-078-2374 · NIIN 010782374 · Part number ET-94195
L3harris Maritime Power & Energy Solutions, Inc. Dba Spd Electrical Systems, Inc. · FSC 5925 — Circuit Breakers · FSG 59 — Electrical and Electronic Equipment Components · CAGE 30086
Government record, cited
NSN 5925-01-078-2374 — this item is cataloged by the U.S. Government under National Stock Number 5925-01-078-2374. Manufacturer of record part number: ET-94195.
Also searched as  5925-01-078-2374 · 5925010782374 · NIIN 010782374 · 01-078-2374 · FSC 5925 Circuit Breakers · CAGE 30086 · ET-94195 · G376972-1 · EH3-B100-F2
Nearby stock numbers  ·
Features
  • Circuit Breaker — FSC 5925
  • Reset Method: MANUAL
  • Operating Voltage Type and Rating Per Pole in Volts: 240.0 AC ALL LOCATIONS
  • Mounting Facility Type and Quantity: 4 THREADED HOLE(S)
  • Actuator Position Designation: AT POLE TWO
  • Switch Terminal Type: WIRE LEAD
  • Frequency in Hertz: 60.0 ALL LOCATIONS
  • Center to Center Distance Between Terminals Parallel to Width: 1.484 INCHES MINIMUM AND 1.516 INCHES MAXIMUM IN
Identification
  • NSN: 5925-01-078-2374
  • NIIN: 010782374
  • FSC: 5925 — Circuit Breakers
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: ET-94195
  • Manufacturer: L3harris Maritime Power & Energy Solutions, Inc. Dba Spd Electrical Systems, Inc.
General Description

The Circuit Breaker, cataloged under National Stock Number 5925-01-078-2374, is classified within Federal Supply Class 5925 (Circuit Breakers) of the Electrical and Electronic Equipment Components group. The manufacturer of record is L3harris Maritime Power & Energy Solutions, Inc. Dba Spd Electrical Systems, Inc.. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5925-01-078-2374
Primary Part NumberET-94195
Item NameCircuit Breaker
FSC / FSG5925 / 59 — Circuit Breakers
ManufacturerL3harris Maritime Power & Energy Solutions, Inc. Dba Spd Electrical Systems, Inc.
StatusACTIVE
Reset MethodMANUAL
Operating Voltage Type and Rating Per Pole in Volts240.0 AC ALL LOCATIONS
Mounting Facility Type and Quantity4 THREADED HOLE(S)
Actuator Position DesignationAT POLE TWO
Switch Terminal TypeWIRE LEAD
Frequency in Hertz60.0 ALL LOCATIONS
Center to Center Distance Between Terminals Parallel to Width1.484 INCHES MINIMUM AND 1.516 INCHES MAXIMUM IN
Fragility FactorMODERATELY RUGGED
Body StyleMULTIPOLE-SINGLE ACTUATOR TYPE
Ultimate Trip Rating of Continuous Current Rating Per Pole in Percent125.0 ALL LOCATIONS
Distance Between Centerlines of Mounting Facilities Parallel to Body Length4.577 INCHES MINIMUM AND 4.609 INCHES MAXIMUM IN
Arc Quenching MethodMAGNETIC BLOWOUT
Switch Location and Position DesignationINTERNAL AT EACH POLE
Precious MaterialSILVER
Circuit Protection TypeOVERCURRENT ALL LOCATIONS
Body Width4.484 INCHES MINIMUM AND 4.516 INCHES MAXIMUM IN
Pole Quantity3
Mounting Surface to Terminal End Distance3.983 INCHES MINIMUM AND 4.015 INCHES MAXIMUM IN
Maximum Continuous Load Current Rating Per Pole100.0 AMPERES AC ALL LOCATIONS
Trip Release CharacteristicINSTANTANEOUS ALL LOCATIONS
Maximum Interrupting Capacity Current Type and Rating Per Pole in Amps15000.0 AC ALL LOCATIONS
Nominal Thread Size0.164 INCHES IN
Specification/standard Data01714-G376972-1 MANUFACTURERS SOURCE CONTROL
Body Length5.984 INCHES MINIMUM AND 6.016 INCHES MAXIMUM IN
Manual Actuator Type and Quantity1 TOGGLE
Distance Between Centerlines of Mounting Facilities Parallel to Body Width1.484 INCHES MINIMUM AND 1.516 INCHES MAXIMUM IN
Inclosure Protection Type for Which DesignedFUNGUS PROOF
Precious Material and LocationTERMINAL AND C0NTACT SURFACES SILVER
Switch Contact ArrangementSINGLE POLE, DOUBLE THROW
Thread Quantity Per Inch32
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
ET-94195 PRIMARY L3harris Maritime Power & Energy Solutions, Inc. Dba Spd Electrical Systems, Inc. (USA)
Reference documents
ReferenceMeaning
G376972-1 5/9 Secondary reference
Lucent Technologies Inc Advanced Technology Systems
EH3-B100-F2 5/1 Secondary reference
Siemens Energy and Automation Inc Ite Circuit Protection Div
No interchangeability data on file.
Other items in FSC 5925 — Circuit Breakers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5925-00-001-1277
CIRCUIT BREAKER
5925-00-001-2809
5925-00-001-2809 · Item name not on file
5925-00-001-3838
CIRCUIT BREAKER
5925-00-001-5748
5925-00-001-5748 · Item name not on file
5925-00-001-5926
5925-00-001-5926 · Item name not on file
5925-00-001-5938
5925-00-001-5938 · Item name not on file
5925-00-001-5942
CIRCUIT BREAKER
5925-00-001-5977
CIRCUIT BREAKER

Frequently Asked Questions

What is NSN 5925-01-078-2374?

NSN 5925-01-078-2374 is a Circuit Breaker, manufactured by L3harris Maritime Power & Energy Solutions, Inc. Dba Spd Electrical Systems, Inc., classified under FSC 5925, Circuit Breakers. Status: active.

What part numbers are listed for NSN 5925-01-078-2374?

NSN 5925-01-078-2374 has 1 manufacturer part number on file: ET-94195 (L3harris Maritime Power & Energy Solutions, Inc. Dba Spd Electrical Systems, Inc.).

What are the specifications of ET-94195?

Key specifications for ET-94195: Reset Method: MANUAL; Operating Voltage Type and Rating Per Pole in Volts: 240.0 AC ALL LOCATIONS; Mounting Facility Type and Quantity: 4 THREADED HOLE(S); Actuator Position Designation: AT POLE TWO. 30 specifications are documented in the U.S. Government catalog.

Is NSN 5925-01-078-2374 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com