The Circuit Breaker, cataloged under National Stock Number 5925-00-879-9402, is classified within Federal Supply Class 5925 (Circuit Breakers) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 7 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5925-00-879-9402 |
| Primary Part Number | MS26574-10A |
| Item Name | Circuit Breaker |
| FSC / FSG | 5925 / 59 — Circuit Breakers |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Bushing Length | 0.359 INCHES NOMINAL IN |
| Reset Method | MANUAL |
| Internal Trip Release Configuration | SERIES TRIP SINGLE LOCATION |
| Operating Voltage Type and Rating Per Pole in Volts | 200.0 AC AND 28.0 DC SINGLE LOCATION |
| Mounting Facility Type and Quantity | 1 THREADED BUSHING |
| Actuator Position Designation | AT POLE ONE |
| Switch Terminal Type | TAB, SOLDER LUG |
| Frequency in Hertz | 400.0 SINGLE LOCATION |
| Fragility Factor | MODERATELY RUGGED |
| Body Style | SINGLE POLE TYPE |
| Switch Voltage Rating and Type in Volts | 200.0 AC AND 28.0 DC |
| Ultimate Trip Rating of Continuous Current Rating Per Pole in Percent | 145.0 SINGLE LOCATION |
| Switch Location and Position Designation | INTERNAL AT POLE ONE |
| Circuit Protection Type | OVERCURRENT SINGLE LOCATION |
| Body Width | 0.580 INCHES MAXIMUM IN |
| Storage Type | GENERAL PURPOSE WAREHOUSE |
| Pole Quantity | 1 |
| Mounting Surface to Terminal End Distance | 1.420 INCHES MAXIMUM IN |
| Maximum Continuous Load Current Rating Per Pole | 10.0 AMPERES AC AND 10.0 AMPERES DC SINGLE LOCATION |
| Trip Release Characteristic | TIME DELAY SINGLE LOCATION |
| Maximum Interrupting Capacity Current Type and Rating Per Pole in Amps | 500.0 AC AND 500.0 DC SINGLE LOCATION |
| Nominal Thread Size | 0.438 INCHES IN |
| Specification/standard Data | 96906-MS26574 GOVERNMENT STANDARD |
| Body Length | 0.780 INCHES MAXIMUM IN |
| Trip Delay Time in Seconds Per Rated Continuous Current | 2.000 MINIMUM AT 200 PCT AND 20.000 MAXIMUM AT 200 PCT SINGLE LOCATION |
| Manual Actuator Type and Quantity | 1 PUSH-PULL |
| Switch Current Rating and Type in Amps | 3.0 AC AND 5.0 DC |
| Test Data Document | 81349-MIL-C-5809 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Switch Contact Arrangement | SINGLE POLE, DOUBLE THROW |
| Thread Quantity Per Inch | 32 |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| MS26574-10A PRIMARY | Sae International Dba Sae International (USA) |
| Reference | Meaning |
|---|---|
| 7274-4-10 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| MS26574-10A | 5/9 Secondary reference U.S. Government activity |
| Q531487060 | 5/9 Secondary reference Rheinmetall Air Defence Ag |
| MIL-C-5809 | 5/9 Secondary reference U.S. Government activity |
| SAE-AS58091 | 3/1 Design control — primary reference Sae International Dba Sae International |
| 6415857 | 5/9 Secondary reference Embraer S.a. |
| 6415857 | 5/9 Secondary reference Embraer Empresa Brasileira De Aeronautica Sa |
NSN 5925-00-879-9402 is a Circuit Breaker, manufactured by Sae International Dba Sae International, classified under FSC 5925, Circuit Breakers. Status: active.
NSN 5925-00-879-9402 has 1 manufacturer part number on file: MS26574-10A (Sae International Dba Sae International).
Key specifications for MS26574-10A: Bushing Length: 0.359 INCHES NOMINAL IN; Reset Method: MANUAL; Internal Trip Release Configuration: SERIES TRIP SINGLE LOCATION; Operating Voltage Type and Rating Per Pole in Volts: 200.0 AC AND 28.0 DC SINGLE LOCATION. 30 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.