The Circuit Breaker, cataloged under National Stock Number 5925-00-620-5844, is classified within Federal Supply Class 5925 (Circuit Breakers) of the Electrical and Electronic Equipment Components group. Government technical data includes 30 specifications, cited from the U.S. Government catalog. 7 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 7 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5925-00-620-5844 |
| Item Name | Circuit Breaker |
| FSC / FSG | 5925 / 59 — Circuit Breakers |
| Status | ACTIVE |
| Reset Method | MANUAL |
| Operating Voltage Type and Rating Per Pole in Volts | 125.0 AC AND 125.0 DC ALL LOCATIONS |
| Mounting Facility Type and Quantity | 2 THREADED HOLE(S) |
| Actuator Position Designation | AT POLE TWO |
| Ultimate Trip Time Per Pole in Seconds | 3600.000 NOMINAL ALL LOCATIONS |
| Switch Terminal Type | TAB, SOLDER LUG |
| Frequency in Hertz | 60.0 ALL LOCATIONS |
| Center to Center Distance Between Terminals Parallel to Width | 1.688 INCHES NOMINAL IN |
| Body Style | MULTIPOLE-SINGLE ACTUATOR TYPE |
| Switch Voltage Rating and Type in Volts | 125.0 AC AND 125.0 DC |
| Ultimate Trip Rating of Continuous Current Rating Per Pole in Percent | 138.0 ALL LOCATIONS |
| External Actuator Linkage Arrangement | ONE, TWO, AND THREE LINKED |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Length | 4.250 INCHES NOMINAL IN |
| Switch Location and Position Designation | EXTERNAL AT POLE TWO |
| Circuit Protection Type | OVERCURRENT ALL LOCATIONS |
| Body Width | 4.750 INCHES NOMINAL IN |
| Storage Type | GENERAL PURPOSE WAREHOUSE |
| Pole Quantity | 3 |
| Mounting Surface to Terminal End Distance | 4.625 INCHES NOMINAL IN |
| Maximum Continuous Load Current Rating Per Pole | 150.0 AMPERES AC AND 150.0 AMPERES DC ALL LOCATIONS |
| Trip Release Characteristic | INSTANTANEOUS AND TIME DELAY ALL LOCATIONS |
| Maximum Interrupting Capacity Current Type and Rating Per Pole in Amps | 10000.0 AC AND 5000.0 DC ALL LOCATIONS |
| Nominal Thread Size | 0.250 INCHES IN |
| Specification/standard Data | 81349-MIL-C-17588 GOVERNMENT SPECIFICATION |
| Body Length | 5.000 INCHES NOMINAL IN |
| Trip Delay Time in Seconds Per Rated Continuous Current | 10.000 MINIMUM AT 200 PCT AND 210.000 MAXIMUM AT 200 PCT ALL LOCATIONS |
| Manual Actuator Type and Quantity | 1 TOGGLE |
| Switch Current Rating and Type in Amps | 10.0 AC AND 10.0 DC |
| Distance Between Centerlines of Mounting Facilities Parallel to Body Width | 0.750 INCHES NOMINAL IN |
| Inclosure Protection Type for Which Designed | FUNGUS RESISTANT |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| TN231150 | C/1 Advisory reference — outside the item-of-supply concept General Electric Co Outdoor Breaker Business Section |
| 6319482G2L | C/1 Advisory reference — outside the item-of-supply concept General Electric Co Outdoor Breaker Business Section |
| ALB-10/150A | 2/2 Government specification standardization U.S. Government activity |
| DMS 79009B | 5/9 Secondary reference Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) |
| 6319452G2L | C/1 Advisory reference — outside the item-of-supply concept General Electric Co Outdoor Breaker Business Section |
| ALB-10/150 | 5/9 Secondary reference U.S. Government activity |
| MIL-C-17588 | 4/1 Identification reference U.S. Government activity |
NSN 5925-00-620-5844 is a Circuit Breaker, classified under FSC 5925, Circuit Breakers. Status: active.
7 possible matches (shared part number, not a government interchangeability claim): 5925-00-620-5851, 5925-00-620-5861, 5925-00-628-7795. Verify interchangeability with system specifications before substitution.
Key specifications for 5925-00-620-5844: Reset Method: MANUAL; Operating Voltage Type and Rating Per Pole in Volts: 125.0 AC AND 125.0 DC ALL LOCATIONS; Mounting Facility Type and Quantity: 2 THREADED HOLE(S); Actuator Position Designation: AT POLE TWO. 30 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.