The Circuit Breaker, cataloged under National Stock Number 5925-00-261-6862, is classified within Federal Supply Class 5925 (Circuit Breakers) of the Electrical and Electronic Equipment Components group. The manufacturer of record is L3 Technologies, Inc. Div L3 Telemetry & Rf Products. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5925-00-261-6862 |
| Primary Part Number | 23231-003 |
| Item Name | Circuit Breaker |
| FSC / FSG | 5925 / 59 — Circuit Breakers |
| Manufacturer | L3 Technologies, Inc. Div L3 Telemetry & Rf Products |
| Status | ACTIVE |
| Bushing Length | 0.375 INCHES MAXIMUM0.375 INCHES MAXIMUM IN |
| Reset Method | MANUALMANUAL |
| Internal Trip Release Configuration | SERIES TRIP ALL LOCATIONSSERIES TRIP ALL LOCATIONS |
| Operating Voltage Type and Rating Per Pole in Volts | 240.0 AC ALL LOCATIONS240.0 AC ALL LOCATIONS |
| Mounting Facility Type and Quantity | 1 THREADED BUSHING WITH PANEL SEAL1 THREADED BUSHING WITH PANEL SEAL |
| Actuator Position Designation | AT POLE TWOAT POLE TWO |
| Frequency in Hertz | 400.0 ALL LOCATIONS400.0 ALL LOCATIONS |
| Unpackaged Unit Weight | 5.400 OUNCES NOMINAL5.400 OUNCES NOMINAL OZ |
| Center to Center Distance Between Terminals Parallel to Width | 0.625 INCHES NOMINAL0.625 INCHES NOMINAL IN |
| Nonturn Device Radius | 0.610 INCHES MINIMUM AND 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM0.640 INCHES MAXIMUM IN |
| Fragility Factor | MODERATELY RUGGEDMODERATELY RUGGED |
| Body Style | MULTIPOLE-SINGLE ACTUATOR TYPEMULTIPOLE-SINGLE ACTUATOR TYPE |
| Ultimate Trip Rating of Continuous Current Rating Per Pole in Percent | 115.0 ALL LOCATIONS115.0 ALL LOCATIONS |
| Arc Quenching Method | MAGNETIC BLOWOUTMAGNETIC BLOWOUT |
| Circuit Protection Type | OVERCURRENT ALL LOCATIONSOVERCURRENT ALL LOCATIONS |
| Body Width | 1.875 INCHES MAXIMUM1.875 INCHES MAXIMUM IN |
| Storage Type | GENERAL PURPOSE WAREHOUSEGENERAL PURPOSE WAREHOUSE |
| Pole Quantity | 33 |
| Mounting Surface to Terminal End Distance | 1.780 INCHES MAXIMUM1.780 INCHES MAXIMUM IN |
| Thread Pitch Diameters | +0.3503 TO 0.3537 INCHES+0.3503 TO 0.3537 INCHES IN |
| Maximum Continuous Load Current Rating Per Pole | 1.3 AMPERES AC ALL LOCATIONS1.3 AMPERES AC ALL LOCATIONS |
| Trip Release Characteristic | TIME DELAY ALL LOCATIONSTIME DELAY ALL LOCATIONS |
| Maximum Interrupting Capacity Current Type and Rating Per Pole in Amps | 1000.0 AC ALL LOCATIONS1000.0 AC ALL LOCATIONS |
| Nominal Thread Size | 0.375 INCHES0.375 INCHES IN |
| Body Length | 1.500 INCHES MAXIMUM1.500 INCHES MAXIMUM IN |
| Trip Delay Time in Seconds Per Rated Continuous Current | 0.055 MINIMUM AT 200 PCT AND 0.055 MINIMUM AT 200 PCT AND 0.950 MAXIMUM AT 200 PCT ALL LOCATIONS0.950 MAXIMUM AT 200 PCT ALL LOCATIONS |
| Manual Actuator Type and Quantity | 1 TOGGLE1 TOGGLE |
| Inclosure Protection Type for Which Designed | HERMETICALLY SEALED AND HERMETICALLY SEALED AND SHOCK RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANTVIBRATION RESISTANT |
| Nonturn Device Diameter | 0.235 INCHES MINIMUM AND 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM0.265 INCHES MAXIMUM IN |
| Thread Quantity Per Inch | 3232 |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 23231-003 PRIMARY | L3 Technologies, Inc. Div L3 Telemetry & Rf Products (USA) |
| Reference | Meaning |
|---|---|
| SM333-1-3-250-400-2 | 5/9 Secondary reference Eaton Corp Heinemann Products Commercial Controls Div |
| AP-112-1-41-132 | 5/2 Secondary reference U.S. Government activity |
| SM333-1-3-250VAC400C2 | 5/9 Secondary reference Eaton Corp Heinemann Products Commercial Controls Div |
NSN 5925-00-261-6862 is a Circuit Breaker, manufactured by L3 Technologies, Inc. Div L3 Telemetry & Rf Products, classified under FSC 5925, Circuit Breakers. Status: active.
NSN 5925-00-261-6862 has 1 manufacturer part number on file: 23231-003 (L3 Technologies, Inc. Div L3 Telemetry & Rf Products).
Key specifications for 23231-003: Bushing Length: 0.375 INCHES MAXIMUM0.375 INCHES MAXIMUM IN; Reset Method: MANUALMANUAL; Internal Trip Release Configuration: SERIES TRIP ALL LOCATIONSSERIES TRIP ALL LOCATIONS; Operating Voltage Type and Rating Per Pole in Volts: 240.0 AC ALL LOCATIONS240.0 AC ALL LOCATIONS. 30 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.