PartsTable TECHNICAL DATA SHEET
NSN 5925-00-204-8199Government record, cited

Circuit Breaker5925-00-204-8199

NSN 5925-00-204-8199 · NIIN 002048199 · Part number A6948-6
Microwave Engineering Corporation · FSC 5925 — Circuit Breakers · FSG 59 — Electrical and Electronic Equipment Components · CAGE 06351
Government record, cited
NSN 5925-00-204-8199 — this item is cataloged by the U.S. Government under National Stock Number 5925-00-204-8199. Manufacturer of record part number: A6948-6.
Also searched as  5925-00-204-8199 · 5925002048199 · NIIN 002048199 · 00-204-8199 · FSC 5925 Circuit Breakers · CAGE 06351 · A6948-6 · 3363SMG4 · 0-4300-915ITEM22 · 3363SM6-3
Nearby stock numbers  ·
Features
  • Circuit Breaker — FSC 5925
  • Reset Method: MANUAL
  • Internal Trip Release Configuration: SERIES TRIP ALL LOCATIONS
  • Operating Voltage Type and Rating Per Pole in Volts: 250.0 AC ALL LOCATIONS
  • Mounting Facility Type and Quantity: 4 THREADED HOLE(S) AND 4 UNTHREADED HOLE(S)
  • Actuator Position Designation: AT POLE TWO
  • Frequency in Hertz: 60.0 ALL LOCATIONS
  • Center to Center Distance Between Terminals Parallel to Width: 0.974 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN
Identification
  • NSN: 5925-00-204-8199
  • NIIN: 002048199
  • FSC: 5925 — Circuit Breakers
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: A6948-6
  • Manufacturer: Microwave Engineering Corporation
General Description

The Circuit Breaker, cataloged under National Stock Number 5925-00-204-8199, is classified within Federal Supply Class 5925 (Circuit Breakers) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Microwave Engineering Corporation. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5925-00-204-8199
Primary Part NumberA6948-6
Item NameCircuit Breaker
FSC / FSG5925 / 59 — Circuit Breakers
ManufacturerMicrowave Engineering Corporation
StatusACTIVE
Reset MethodMANUAL
Internal Trip Release ConfigurationSERIES TRIP ALL LOCATIONS
Operating Voltage Type and Rating Per Pole in Volts250.0 AC ALL LOCATIONS
Mounting Facility Type and Quantity4 THREADED HOLE(S) AND 4 UNTHREADED HOLE(S)
Actuator Position DesignationAT POLE TWO
Frequency in Hertz60.0 ALL LOCATIONS
Center to Center Distance Between Terminals Parallel to Width0.974 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN
Fragility FactorMODERATELY RUGGED
Body StyleMULTIPOLE-SINGLE ACTUATOR TYPE
Ultimate Trip Rating of Continuous Current Rating Per Pole in Percent125.0 ALL LOCATIONS
Distance Between Centerlines of Mounting Facilities Parallel to Body Length3.052 INCHES MINIMUM AND 3.072 INCHES MAXIMUM IN
Arc Quenching MethodMAGNETIC BLOWOUT
Circuit Protection TypeOVERCURRENT ALL LOCATIONS
Body Width2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN
Body Height2.677 INCHES MINIMUM AND 2.697 INCHES MAXIMUM IN
Storage TypeGENERAL PURPOSE WAREHOUSE
Unthreaded Mounting Hole Diameter0.190 INCHES NOMINAL IN
Pole Quantity3
Maximum Continuous Load Current Rating Per Pole3.0 AMPERES AC ALL LOCATIONS
Trip Release CharacteristicTIME DELAY ALL LOCATIONS
Maximum Interrupting Capacity Current Type and Rating Per Pole in Amps5000.0 AC ALL LOCATIONS
Nominal Thread Size0.164 INCHES IN
Body Length5.240 INCHES MINIMUM AND 5.260 INCHES MAXIMUM IN
Trip Delay Time in Seconds Per Rated Continuous Current0.320 MINIMUM AT 200 PCT AND 1.000 MAXIMUM AT 200 PCT ALL LOCATIONS
Manual Actuator Type and Quantity1 TOGGLE
Distance Between Centerlines of Mounting Facilities Parallel to Body Width0.974 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN
Inclosure Protection Type for Which DesignedDUSTPROOF AND FUNGUS PROOF
Thread Quantity Per Inch32
MaterialPLASTIC CASE
Actuator FunctionTRIP-RESET
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
A6948-6 Microwave Engineering Corporation (USA)
0-4300-915ITEM22 Trane U.s. Inc. Dba the Trane Co Div Trane Headquarters (USA)
Reference documents
ReferenceMeaning
A6948-6 5/9 Secondary reference
U.S. Government activity
3363SMG4 5/9 Secondary reference
Eaton Corp Heinemann Products Commercial Controls Div
3363SM6-3 5/9 Secondary reference
Eaton Corp Heinemann Products Commercial Controls Div
3363SMG6-3-250-60-3 5/9 Secondary reference
Eaton Corp Heinemann Products Commercial Controls Div
3363SMG4-3-250-60-3 3/9 Design control — primary reference
Eaton Corp Heinemann Products Commercial Controls Div
No interchangeability data on file.
Other items in FSC 5925 — Circuit Breakers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5925-00-001-1277
CIRCUIT BREAKER
5925-00-001-2809
5925-00-001-2809 · Item name not on file
5925-00-001-3838
CIRCUIT BREAKER
5925-00-001-5748
5925-00-001-5748 · Item name not on file
5925-00-001-5926
5925-00-001-5926 · Item name not on file
5925-00-001-5938
5925-00-001-5938 · Item name not on file
5925-00-001-5942
CIRCUIT BREAKER
5925-00-001-5977
CIRCUIT BREAKER

Frequently Asked Questions

What is NSN 5925-00-204-8199?

NSN 5925-00-204-8199 is a Circuit Breaker, manufactured by Microwave Engineering Corporation, classified under FSC 5925, Circuit Breakers. Status: active.

What part numbers are listed for NSN 5925-00-204-8199?

NSN 5925-00-204-8199 has 2 manufacturer part numbers on file: A6948-6 (Microwave Engineering Corporation), 0-4300-915ITEM22 (Trane U.s. Inc. Dba the Trane Co Div Trane Headquarters).

What are the specifications of A6948-6?

Key specifications for A6948-6: Reset Method: MANUAL; Internal Trip Release Configuration: SERIES TRIP ALL LOCATIONS; Operating Voltage Type and Rating Per Pole in Volts: 250.0 AC ALL LOCATIONS; Mounting Facility Type and Quantity: 4 THREADED HOLE(S) AND 4 UNTHREADED HOLE(S). 30 specifications are documented in the U.S. Government catalog.

Is NSN 5925-00-204-8199 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com