The Circuit Breaker, cataloged under National Stock Number 5925-00-154-8174, is classified within Federal Supply Class 5925 (Circuit Breakers) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Honeywell Intl Inc Defense Avionics Systems Former Test Systems Div. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 7 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5925-00-154-8174 |
| Primary Part Number | 1943379-40 |
| Item Name | Circuit Breaker |
| FSC / FSG | 5925 / 59 — Circuit Breakers |
| Manufacturer | Honeywell Intl Inc Defense Avionics Systems Former Test Systems Div |
| Status | ACTIVE |
| Bushing Length | 0.375 INCHES MAXIMUM IN |
| Reset Method | MANUAL |
| Internal Trip Release Configuration | SERIES TRIP ALL LOCATIONS |
| Operating Voltage Type and Rating Per Pole in Volts | 240.0 AC ALL LOCATIONS |
| Mounting Facility Type and Quantity | 1 THREADED BUSHING WITH PANEL SEAL |
| Actuator Position Designation | AT POLE TWO |
| Ultimate Trip Time Per Pole in Seconds | 5.000 NOMINAL ALL LOCATIONS |
| Frequency in Hertz | 400.0 ALL LOCATIONS |
| Center to Center Distance Between Terminals Parallel to Width | 0.625 INCHES NOMINAL IN |
| Fragility Factor | MODERATELY RUGGED |
| Body Style | MULTIPOLE-SINGLE ACTUATOR TYPE |
| Ultimate Trip Rating of Continuous Current Rating Per Pole in Percent | 115.0 ALL LOCATIONS |
| Arc Quenching Method | MAGNETIC BLOWOUT |
| Circuit Protection Type | OVERCURRENT ALL LOCATIONS |
| Body Width | 1.875 INCHES MAXIMUM IN |
| Storage Type | GENERAL PURPOSE WAREHOUSE |
| Pole Quantity | 3 |
| Mounting Surface to Terminal End Distance | 1.780 INCHES MAXIMUM IN |
| Thread Pitch Diameters | +0.1177 TO 0.1214 INCHES IN |
| Maximum Continuous Load Current Rating Per Pole | 1.5 AMPERES AC ALL LOCATIONS |
| Trip Release Characteristic | TIME DELAY ALL LOCATIONS |
| Maximum Interrupting Capacity Current Type and Rating Per Pole in Amps | 300.0 AC ALL LOCATIONS |
| Nominal Thread Size | 0.138 INCHES IN |
| Body Length | 1.500 INCHES MAXIMUM IN |
| Trip Delay Time in Seconds Per Rated Continuous Current | 0.180 MINIMUM AT 200 PCT AND 0.700 MAXIMUM AT 200 PCT ALL LOCATIONS |
| Manual Actuator Type and Quantity | 1 TOGGLE |
| Inclosure Protection Type for Which Designed | HERMETICALLY SEALED |
| Thread Quantity Per Inch | 32 |
| Actuator Function | TRIP-RESET |
| Terminal Type and Quantity | 6 WIRE HOOK |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 1943379-40 PRIMARY | Honeywell Intl Inc Defense Avionics Systems Former Test Systems Div (USA) |
| Reference | Meaning |
|---|---|
| AP1-251-40 | 5/1 Secondary reference U.S. Government activity |
| QB400229-40 | 5/9 Secondary reference Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems |
| 1943379-40 | 5/9 Secondary reference Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems |
| QB400229-40 | 5/1 Secondary reference Honeywell Intl Inc Defense Avionics Systems Former Test Systems Div |
| AP112-251-40 | 5/2 Secondary reference U.S. Government activity |
| HEC3-1-5-240VAC2-400HZ | 5/9 Secondary reference Eaton Corp Heinemann Products Commercial Controls Div |
| SM333-1-5-240-400-2 | 5/9 Secondary reference Eaton Corp Heinemann Products Commercial Controls Div |
NSN 5925-00-154-8174 is a Circuit Breaker, manufactured by Honeywell Intl Inc Defense Avionics Systems Former Test Systems Div, classified under FSC 5925, Circuit Breakers. Status: active.
NSN 5925-00-154-8174 has 1 manufacturer part number on file: 1943379-40 (Honeywell Intl Inc Defense Avionics Systems Former Test Systems Div).
Key specifications for 1943379-40: Bushing Length: 0.375 INCHES MAXIMUM IN; Reset Method: MANUAL; Internal Trip Release Configuration: SERIES TRIP ALL LOCATIONS; Operating Voltage Type and Rating Per Pole in Volts: 240.0 AC ALL LOCATIONS. 30 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.