PartsTable
Technical Data Sheet
Download PDF

5920050404 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5920050404: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.739 INCHES MINIMUM AND 0.769 INCHES MAXIMUM IN, center_hole_diameter: 0.614 INCHES NOMINAL IN, cross-sectional_height: 0.070 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-091-1256, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5920050404
NSN: 5331-01-091-1256
FSC: 5331 — O-ring
CAGE: S3934 — SAAB KOCKUMS AB - KARLSKRONA (SWE)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter0.739 INCHES MINIMUM AND 0.769 INCHES MAXIMUM IN
center_hole_diameter0.614 INCHES NOMINAL IN
cross-sectional_height0.070 INCHES NOMINAL IN
NSN5331-01-091-1256
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5920050404 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.070 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.739 INCHES MINIMUM AND 0.769 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
COLOR: BLACK
•
CENTER HOLE DIAMETER: 0.614 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.070 INCHES NOMINAL IN
OUTSIDE DIAMETER0.739 INCHES MINIMUM AND 0.769 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
COLORBLACK
CENTER HOLE DIAMETER0.614 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 8
134904Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
041302 R1 DL08509Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-016V377-9Reference document
Same NSN cross-reference
Reference document — Secondary reference
695-00016Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
11111-0-002789Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-016V709-90Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5920050404?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5920050404?
5920050404 is a O-RING.
What parts can replace 5920050404?
There are 8 known substitutes for 5920050404: 134904, 041302 R1 DL08509, 2-016V377-9 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5920050404?
5920050404 is cataloged in the U.S. Government catalog under NSN 5331-01-091-1256. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5920050404