PartsTable TECHNICAL DATA SHEET
NSN 5920-01-506-7720Government record, cited

Fuseholder, Extractor Post5920-01-506-7720

NSN 5920-01-506-7720 · NIIN 015067720
FSC 5920 — Fuses, Arrestors, Absorbers, and Protectors · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5920-01-506-7720 · 5920015067720 · NIIN 015067720 · 01-506-7720 · FSC 5920 Fuses, Arrestors, Absorbers, and Protectors · 201-7429276 ITEM 20A · FHL30G-6 · MIL-PRF-19207/19 · FHL30G-006
Nearby stock numbers  ·
Features
  • Fuseholder,extractor Post — FSC 5920
  • Resistor Rating: 2050.0 OHMS
  • Accommodated Fuse Length: 1.250 INCHES NOMINAL IN
  • Mounting Hole Quantity: 2
  • Screw Thread Quantity Per Inch: 32.0
  • Center to Center Distance Between Keyway and Bushing Hole: 0.437 INCHES NOMINAL IN
  • Body Style: REAR PANEL MOUNTED TYPE
  • Mounting Hole Style: BUSHING MOUNTING W/2 HOLES AND KEYWAY
Identification
  • NSN: 5920-01-506-7720
  • NIIN: 015067720
  • FSC: 5920 — Fuses, Arrestors, Absorbers, and Protectors
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Fuseholder,extractor Post, cataloged under National Stock Number 5920-01-506-7720, is classified within Federal Supply Class 5920 (Fuses, Arrestors, Absorbers, and Protectors) of the Electrical and Electronic Equipment Components group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5920-01-506-7720
Item NameFuseholder,extractor Post
FSC / FSG5920 / 59 — Fuses, Arrestors, Absorbers, and Protectors
StatusACTIVE
Resistor Rating2050.0 OHMS
Accommodated Fuse Length1.250 INCHES NOMINAL IN
Mounting Hole Quantity2
Screw Thread Quantity Per Inch32.0
Center to Center Distance Between Keyway and Bushing Hole0.437 INCHES NOMINAL IN
Body StyleREAR PANEL MOUNTED TYPE
Mounting Hole StyleBUSHING MOUNTING W/2 HOLES AND KEYWAY
Length From Front Protrusion to Mounting Surface0.830 INCHES NOMINAL IN
Center to Center Distance Between Outside Mounting Holes Along Length0.750 INCHES NOMINAL IN
Voltage in Volts90.0
Material Document and ClassificationMIL-M-14, TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE BODY
Mounting Hole Diameter0.156 INCHES NOMINAL IN
Interruption Indicator MethodINCANDESCENT LAMP
Specification/standard Data81349-MIL-PRF-19207/19 GOVERNMENT SPECIFICATION
Accommodated Ferrule Diameter0.250 INCHES NOMINAL IN
Fuse Terminal Type AccommodatedFERRULE
Screw Thread Diameter0.164 INCHES NOMINAL IN
Keyway Width0.105 INCHES NOMINAL IN
Bushing Hole Diameter0.875 INCHES NOMINAL IN
Environmental ProtectionDRIPPROOF
Current Carrying Rating in Amps30.0
Test Data Document81349-MIL-PRF-19207 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Center to Center Distance Between Outside Mounting Holes Along Width0.875 INCHES NOMINAL IN
MaterialPLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS OR PLASTIC POLYCAPROLACTAM AND GLASS OR PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS BODY
MaterialCOPPER ALLOY CONTACT
Terminal Type and Quantity2 THREADED STUD
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
201-7429276 ITEM 20A 5/1 Secondary reference
Naval Sea Systems Command
FHL30G-6 5/9 Secondary reference
U.S. Government activity
MIL-PRF-19207/19 4/1 Identification reference
U.S. Government activity
FHL30G-006 2/2 Government specification standardization
U.S. Government activity

Frequently Asked Questions

What is NSN 5920-01-506-7720?

NSN 5920-01-506-7720 is a Fuseholder,extractor Post, classified under FSC 5920, Fuses, Arrestors, Absorbers, and Protectors. Status: active.

What are the specifications of 5920-01-506-7720?

Key specifications for 5920-01-506-7720: Resistor Rating: 2050.0 OHMS; Accommodated Fuse Length: 1.250 INCHES NOMINAL IN; Mounting Hole Quantity: 2; Overall Height: 1.200 INCHES NOMINAL IN. 26 specifications are documented in the U.S. Government catalog.

Is NSN 5920-01-506-7720 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com