The Fuseholder,block, cataloged under National Stock Number 5920-00-107-0824, is classified within Federal Supply Class 5920 (Fuses, Arrestors, Absorbers, and Protectors) of the Electrical and Electronic Equipment Components group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5920-00-107-0824 |
| Item Name | Fuseholder,block |
| FSC / FSG | 5920 / 59 — Fuses, Arrestors, Absorbers, and Protectors |
| Status | ACTIVE |
| Accommodated Fuse Length | 3.188 INCHES NOMINAL IN |
| Mounting Hole Quantity | 2 |
| Screw Thread Quantity Per Inch | 24.0 |
| Surface Treatment Document and Classification | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE TERMINAL |
| Body Style | OPEN TYPE |
| Internal Circuit Configuration and Pole Quantity | 1 POLE, MAINLINE, FUSED |
| Mounting Hole Style | IN-LINE ALONG THE LENGTH |
| Center to Center Distance Between Outside Mounting Holes Along Length | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM IN |
| Voltage in Volts | 41.0 |
| Center to Center Distance Between Fuse Contacts | 2.433 INCHES MINIMUM AND 2.443 INCHES MAXIMUM IN |
| Material Document and Classification | QQ-S-365 FED SPEC SINGLE MATERIAL RESPONSE TERMINAL |
| Mounting Hole Diameter | 0.190 INCHES NOMINAL IN |
| Accommodated Fuse Width | 0.750 INCHES NOMINAL IN |
| Accommodated Fuse Thickness | 0.094 INCHES MAXIMUM IN |
| Fuse Terminal Type Accommodated | SLOTTED LUG |
| Screw Thread Diameter | 0.312 INCHES NOMINAL IN |
| Surface Treatment | CADMIUM CONTACT |
| Surface Treatment | CADMIUM OR SILVER TERMINAL |
| Current Carrying Rating in Amps | 500.0 |
| Test Data Document | 81349-MIL-F-5373C SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Base Thickness | 0.580 INCHES MAXIMUM IN |
| Material | PLASTIC BODY |
| Material | SILVER TERMINAL |
| Material | STEEL CONTACT |
| Terminal Type and Quantity | 2 THREADED STUD |
| Fuse Accommodation Quantity | 1 |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 5920PL2023676 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
| MS28934-1 | 2/2 Government specification standardization U.S. Government activity |
NSN 5920-00-107-0824 is a Fuseholder,block, classified under FSC 5920, Fuses, Arrestors, Absorbers, and Protectors. Status: active.
Key specifications for 5920-00-107-0824: Accommodated Fuse Length: 3.188 INCHES NOMINAL IN; Mounting Hole Quantity: 2; Overall Height: 1.922 INCHES MAXIMUM IN; Screw Thread Quantity Per Inch: 24.0. 26 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.