PartsTable
Technical Data Sheet
Download PDF

5917494-1 — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5917494-1: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, body_width: 5.000 INCHES NOMINAL IN, performance_type: NOT RATED, surface_treatment: UNABLE TO DECODE, material_thickness: 0.062 INCHES NOMINAL IN, mounting_hole_diameter: 0.128 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-406-4207, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5917494-1
NSN: 5340-01-406-4207
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialUNABLE TO DECODE
body_width5.000 INCHES NOMINAL IN
knuckle_quantity2
performance_typeNOT RATED
surface_treatmentUNABLE TO DECODE
material_thickness0.062 INCHES NOMINAL IN
mounting_hole_diameter0.128 INCHES NOMINAL IN
mounting_hole_quantity6
pin_center_to_body_edge_distance1.000 INCHES NOMINAL IN
NSN5340-01-406-4207
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5917494-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 6
•
BODY WIDTH: 5.000 INCHES NOMINAL IN
•
MOUNTING HOLE DIAMETER: 0.128 INCHES NOMINAL IN
•
PIN CENTER TO BODY EDGE DISTANCE: 1.000 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
KNUCKLE QUANTITY: 2
•
SURFACE TREATMENT: UNABLE TO DECODE
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY6
BODY WIDTH5.000 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.128 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE1.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
KNUCKLE QUANTITY2
SURFACE TREATMENTUNABLE TO DECODE
MATERIALUNABLE TO DECODE
PERFORMANCE TYPENOT RATED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
1-30-17089Reference document
Same NSN cross-reference
Reference document — Secondary reference
H1002D3-5W1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5917494-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5917494-1?
5917494-1 is a HINGE,BUTT.
What parts can replace 5917494-1?
There are 2 known substitutes for 5917494-1: 1-30-17089, H1002D3-5W1. Substitute compatibility should be verified for your specific system.
What is the NSN for 5917494-1?
5917494-1 is cataloged in the U.S. Government catalog under NSN 5340-01-406-4207. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5917494-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.