PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

J180Filter,low Pass

Netcom, Inc · NSN 5915-01-058-1323 · FSC 5915 · No Item Name Available
Verified by PartsTable
NSN 5915-01-058-1323 — this item is cataloged by the U.S. Government under National Stock Number 5915-01-058-1323. Primary manufacturer part number: J180.
Features
  • Filter,low Pass — FSC 5915
  • Vibration Resistance Range in Hertz: +10.0 TO 2000.0+10.0 TO 2000.0
  • Inclosure Type: ENCASED
  • Body Width: 0.770 INCHES MAXIMUM0.770 INCHES MAXIMUM IN
  • Functional Terminal Type and Quantity: 1 SOLDER STUD OUTPUT SECOND FUNCTION
  • Distance Between Centerlines of Mounting Facilities Parallel to Body Width: 0.480 INCHES NOMINAL0.480 INCHES NOMINAL IN
  • Body Length: 1.020 INCHES MAXIMUM1.020 INCHES MAXIMUM IN
  • Insertion Loss at Reference Frequency Per Function in Decibels: 2.0 BLANK LOCATION NOT OTHERWISE SPECIFIED
Applications
  • Fluid filtration and purification
  • Engine intake air cleaning
  • Hydraulic system protection
General Description

The Filter,low Pass, cataloged under National Stock Number 5915-01-058-1323, is classified within Federal Supply Class 5915 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Netcom, Inc. Government technical data includes 22 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 4 manufacturers, enabling identification through both NSN and commercial part number lookups. 9 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5915-01-058-1323
Primary Part NumberJ180
Item NameFilter,low Pass
FSC / FSG5915 / 59 — No Item Name Available
ManufacturerNetcom, Inc
StatusACTIVE
Vibration Resistance Range in Hertz+10.0 TO 2000.0+10.0 TO 2000.0
Inclosure TypeENCASED
Body Width0.770 INCHES MAXIMUM0.770 INCHES MAXIMUM IN
Functional Terminal Type and Quantity1 SOLDER STUD OUTPUT SECOND FUNCTION
Distance Between Centerlines of Mounting Facilities Parallel to Body Width0.480 INCHES NOMINAL0.480 INCHES NOMINAL IN
Body Length1.020 INCHES MAXIMUM1.020 INCHES MAXIMUM IN
Insertion Loss at Reference Frequency Per Function in Decibels2.0 BLANK LOCATION NOT OTHERWISE SPECIFIED
Input Impedance Per Function W/load50.0 OHMS BLANK LOCATION NOT OTHERWISE SPECIFIED
Operating Temp Range-25.0 TO 50.0 CELSIUS-25.0 TO 50.0 CELSIUS DEGC
Style DesignatorRECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES
Reference Frequency Per Function30.0 MEGAHERTZ BLANK LOCATION NOT OTHERWISE SPECIFIED
Discrimination at Specified Frequencies Per Function in Decibels1.0 MAXIMUM BLANK AND 40.0 MINIMUM BLANK FIRST FUNCTION
Frequency Band Width Per Function25.00 MEGAHERTZ BLANK AND 35.00 MEGAHERTZ BLANK LOCATION NOT OTHERWISE SPECIFIED
Mounting Facility Type and Quantity2 THREADED HOLE(S) LOCATION NOT OTHERWISE SPECIFIED
Functional Terminal Type and Quantity2 SOLDER STUD GROUND THIRD FUNCTION
Voltage Standing Wave Ratio Per Function1.5 BLANK LOCATION NOT OTHERWISE SPECIFIED
Functional Terminal Type and Quantity1 SOLDER STUD INPUT FIRST FUNCTION
Distance Between Centerlines of Mounting Facilities Parallel to Body Length0.730 INCHES NOMINAL0.730 INCHES NOMINAL IN
Mounting Facility Screw Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Nominal Thread Size0.112 INCHES IN
Output Impedance Per Function W/source Across Input50.0 OHMS BLANK LOCATION NOT OTHERWISE SPECIFIED
Specified Frequencies of Discrimination Per Function25.00 MEGAHERTZ BLANK AND 35.00 MEGAHERTZ BLANK AND 50.00 MEGAHERTZ BLANK AND 100.00 MEGAHERTZ BLANK LOCATION NOT OTHERWISE SPECIFIED
Lifecycle & Compliance
Acquisition StatusACTIVE
HAZMATNo
Verified Substitutes 9
9540-00-197-9866 INTERCHANGEABLE
Channel,structural
3220-00-287-9184 INTERCHANGEABLE
Surfacer,woodworking
5930-00-421-2428ESR350 INTERCHANGEABLE
Switch,rotary
Mission Systems Davenport Inc.
5970-00-556-54622644 INTERCHANGEABLE
Insulator,standoff
Halsit Holdings Llc Div Halsit Holdings, Llc Dba Abbatron
4320-00-652-8964J180 INTERCHANGEABLE
Shaft,pump
Circor Naval Solutions Llc Dba Warren Pumps
5998-01-117-57272644 INTERCHANGEABLE
Circuit Card Assembly
Analog Devices Inc Div Greensboro Site
4240-01-152-35555590T71 INTERCHANGEABLE
Mask,air Filtering
Mcmaster-Carr Supply Co
5340-01-354-59332644 INTERCHANGEABLE
Button,plug
Heyco Inc Dba Heyco Products
5136-01-431-6120 INTERCHANGEABLE
Tap Set,thread Cutting
Cross-Reference Index
Part NumberManufacturer
J180 Netcom, Inc (USA)
7583716P0001 Lockheed Martin Corp Naval Electronics & Surveillance Systems (USA)
7583716P1 Lockheed Martin Corp Naval Electronics & Surveillance Systems (USA)
2644 Magnetika Inc Div Magnetika/phillipsburg Location (USA)
2644 Opt Industries Inc Div of Electronika Inc (USA)
Related Parts
9540-00-197-9866INTERCHANGEABLE
CHANNEL,STRUCTURAL
3220-00-287-9184INTERCHANGEABLE
SURFACER,WOODWORKING
5930-00-421-2428INTERCHANGEABLE
SWITCH,ROTARY
ESR350
5970-00-556-5462INTERCHANGEABLE
INSULATOR,STANDOFF
2644
4320-00-652-8964INTERCHANGEABLE
SHAFT,PUMP
J180
5998-01-117-5727INTERCHANGEABLE
CIRCUIT CARD ASSEMBLY
2644
4240-01-152-3555INTERCHANGEABLE
MASK,AIR FILTERING
5590T71
5340-01-354-5933INTERCHANGEABLE
BUTTON,PLUG
2644
5136-01-431-6120INTERCHANGEABLE
TAP SET,THREAD CUTTING

Frequently Asked Questions

What is NSN 5915-01-058-1323?

NSN 5915-01-058-1323 is a Filter,low Pass, manufactured by Netcom, Inc, classified under FSC 5915 (No Item Name Available). Status: active.

What are the part numbers for NSN 5915-01-058-1323?

NSN 5915-01-058-1323 has 5 cross-referenced part numbers: J180 (Netcom, Inc), 7583716P0001 (Lockheed Martin Corp Naval Electronics & Surveillance Systems), 7583716P1 (Lockheed Martin Corp Naval Electronics & Surveillance Systems), 2644 (Magnetika Inc Div Magnetika/phillipsburg Location), 2644 (Opt Industries Inc Div of Electronika Inc).

What NSN replaces 5915-01-058-1323?

There are 9 known substitutes for 5915-01-058-1323: 9540-00-197-9866, 3220-00-287-9184, 5930-00-421-2428 and 6 more. Verify interchangeability with system specifications before substitution.

What are the specifications of J180?

Key specifications for J180: Vibration Resistance Range in Hertz: +10.0 TO 2000.0+10.0 TO 2000.0; Inclosure Type: ENCASED; Body Width: 0.770 INCHES MAXIMUM0.770 INCHES MAXIMUM IN; Functional Terminal Type and Quantity: 1 SOLDER STUD OUTPUT SECOND FUNCTION. 24 total characteristics are documented in the Federal Logistics Information System.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com