The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-398-4888, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 14 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-398-4888 |
| Item Name | Capacitor,fixed,ceramic Dielectr |
| FSC / FSG | 5910 / 59 — Capacitors |
| Status | ACTIVE |
| Terminal Diameter | 0.023 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN |
| Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius | 0.0 SINGLE SECTION |
| Body Style | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| Tolerance Range Per Section | -0.10 TO 0.10 PICOFARADS SINGLE SECTION |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC |
| Terminal Surface Treatment | SOLDER |
| Terminal Length | 1.250 INCHES MAXIMUM IN |
| Body Width | 0.190 INCHES NOMINAL IN |
| Body Height | 0.090 INCHES NOMINAL IN |
| Reliability Failure Rate Level in Percent | 0.001 |
| Nonderated Continuous Voltage Rating and Type Per Section | 200.0 DC SINGLE SECTION |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Specification/standard Data | 81349-MIL-C-20/35 GOVERNMENT SPECIFICATION |
| Body Length | 0.190 INCHES NOMINAL IN |
| Capacitance Value Per Section | 3.900 PICOFARADS SINGLE SECTION |
| Reliability Indicator | ESTABLISHED |
| Test Data Document | 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | CERAMIC CASE |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| Tolerance of Temp Coefficient Per Section in Ppm Per Deg Celsius | -250.0 TO 250.0 SINGLE SECTION |
| Center to Center Distance Between Terminals Parallel to Length | 0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| CCR05CK3R9DMV | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| CCR05CK3R9CPV | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| MIL-C-20/35 | 5/9 Secondary reference U.S. Government activity |
| CCR05CK3R9DSV | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| CCR05CK3R9BMV | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| CCR05CK3R9CMV | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| CCR05CK3R9DRV | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| CCR05CK3R9BSV | 2/2 Government specification standardization U.S. Government activity |
| MIL-PRF-20/35 | 4/1 Identification reference U.S. Government activity |
| CCR05CK3R9BPV | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| CCR05CK3R9CRV | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| CCR05CK3R9CSV | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| CCR05CK3R9BRV | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| CCR05CK3R9DPV | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
NSN 5910-01-398-4888 is a Capacitor,fixed,ceramic Dielectr, classified under FSC 5910, Capacitors. Status: active.
Key specifications for 5910-01-398-4888: Terminal Diameter: 0.023 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN; Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius: 0.0 SINGLE SECTION; Body Style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE; Tolerance Range Per Section: -0.10 TO 0.10 PICOFARADS SINGLE SECTION. 21 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.