The Capacitor,fixed,paper Dielectric, cataloged under National Stock Number 5910-01-392-6364, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings). Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 3 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-392-6364 |
| Primary Part Number | LO4508 |
| Item Name | Capacitor,fixed,paper Dielectric |
| FSC / FSG | 5910 / 59 — Capacitors |
| Manufacturer | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) |
| Status | ACTIVE |
| Continuous Current Rating in Amps | 50.0 |
| Terminal Diameter | 0.250 INCHES NOMINAL IN |
| Body Style | W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE |
| Tolerance Range Per Section | -10.00 TO 10.00 PERCENT SINGLE SECTION |
| Nonderated Operating Temp | -40.0 CELSIUS MINIMUM AND 80.0 CELSIUS MAXIMUM DEGC |
| Body Width | 2.840 INCHES NOMINAL IN |
| Body Height | 6.000 INCHES NOMINAL IN |
| Criticality Code Justification | ZZZY |
| Nonderated Continuous Voltage Rating and Type Per Section | 700.0 AC-RMS SINGLE SECTION |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Case Insulation Material | PLASTIC |
| Body Length | 4.560 INCHES NOMINAL IN |
| Dissipation Factor at Reference Temp in Percent | 0.200 |
| Capacitance Value Per Section | 30.000 MICROFARADS SINGLE SECTION |
| Reliability Indicator | NOT ESTABLISHED |
| Terminal Height From Body | 1.500 INCHES MAXIMUM IN |
| Terminal Type and Quantity | 2 STANDOFF, THREADED STUD |
| Reference Number Differentiating Characteristics | REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP. |
| Center to Center Distance Between Terminals Parallel to Length | 2.000 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | S |
| Part Number | Manufacturer |
|---|---|
| LO4508 | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) (USA) |
| Reference | Meaning |
|---|---|
| 3993-2 | 5/9 Secondary reference High Energy Corp. |
| 3A62070H09 | 5/9 Secondary reference U.S. Government activity |
| 3A62070H09 | 5/1 Secondary reference U.S. Government activity |
| 3A62070H09 | 3/1 Design control — primary reference Northrop Grumman Systems Corporation Div Marine Systems |
| S00086 | 5/9 Secondary reference Nwl, Inc. Dba Nwl Capacitors |
| 3A62070H09 | 5/1 Secondary reference Csi Technologies, Inc. Dba Csi Technologies Inc |
NSN 5910-01-392-6364 is a Capacitor,fixed,paper Dielectric, manufactured by Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings), classified under FSC 5910, Capacitors. Status: active.
NSN 5910-01-392-6364 has 1 manufacturer part number on file: LO4508 (Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)).
3 possible matches (shared part number, not a government interchangeability claim): 4730-01-394-3297, 4820-01-517-3438, 5330-01-683-0240. Verify interchangeability with system specifications before substitution.
Key specifications for LO4508: Continuous Current Rating in Amps: 50.0; Terminal Diameter: 0.250 INCHES NOMINAL IN; Body Style: W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE; Tolerance Range Per Section: -10.00 TO 10.00 PERCENT SINGLE SECTION. 19 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.