PartsTable TECHNICAL DATA SHEET
NSN 5910-01-389-3761Government record, cited

Capacitor, Fixed, Electrolytic5910-01-389-3761

NSN 5910-01-389-3761 · NIIN 013893761 · Part number 89085-111
Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (drawings) · FSC 5910 — Capacitors · FSG 59 — Electrical and Electronic Equipment Components · CAGE 037Z3
Government record, cited
NSN 5910-01-389-3761 — this item is cataloged by the U.S. Government under National Stock Number 5910-01-389-3761. Manufacturer of record part number: 89085-111.
Also searched as  5910-01-389-3761 · 5910013893761 · NIIN 013893761 · 01-389-3761 · FSC 5910 Capacitors · CAGE 037Z3 · 89085-111 · 89085 · 81D222P063KB2
Nearby stock numbers  ·
Features
  • Capacitor,fixed,electrolytic — FSC 5910
  • Body Diameter: 1.180 INCHES MINIMUM AND 1.219 INCHES MAXIMUM IN
  • Body Style: W/O MTG FACILITIES, TERMINAL(S) ON ONE END
  • Tolerance Range Per Section: -20.00 TO 20.00 PERCENT SINGLE SECTION
  • Nonderated Operating Temp: -40.0 CELSIUS MINIMUM AND 105.0 CELSIUS MAXIMUM DEGC
  • Terminal Surface Treatment: SOLDER
  • Terminal Length: 0.210 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
  • Electrical Polarization: POLARIZED
Identification
  • NSN: 5910-01-389-3761
  • NIIN: 013893761
  • FSC: 5910 — Capacitors
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 89085-111
  • Manufacturer: Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (drawings)
General Description

The Capacitor,fixed,electrolytic, cataloged under National Stock Number 5910-01-389-3761, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (drawings). Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-01-389-3761
Primary Part Number89085-111
Item NameCapacitor,fixed,electrolytic
FSC / FSG5910 / 59 — Capacitors
ManufacturerDla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (drawings)
StatusACTIVE
Body Diameter1.180 INCHES MINIMUM AND 1.219 INCHES MAXIMUM IN
Body StyleW/O MTG FACILITIES, TERMINAL(S) ON ONE END
Tolerance Range Per Section-20.00 TO 20.00 PERCENT SINGLE SECTION
Nonderated Operating Temp-40.0 CELSIUS MINIMUM AND 105.0 CELSIUS MAXIMUM DEGC
Terminal Surface TreatmentSOLDER
Terminal Length0.210 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
Electrical PolarizationPOLARIZED
Center to Center Distance Between Terminals Parallel to Diameter0.390 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN
Equivalent Series Resistance at Reference Temp in Ohms99.00
Reference Temp at Which Rated25.0 CELSIUS DEGC
Nonderated Continuous Voltage Rating and Type Per Section63.0 DC SINGLE SECTION
Schematic Diagram DesignatorNO COMMON OR GROUNDED ELECTRODE(S)
Case Insulation MaterialPLASTIC
Body Length1.101 INCHES MINIMUM AND 1.259 INCHES MAXIMUM IN
Capacitance Value Per Section2200.000 MICROFARADS SINGLE SECTION
Reliability IndicatorNOT ESTABLISHED
Capacitive Electrode MaterialALUMINUM
Test Data Document14933-89085 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) AND 81349-MIL-C-39018 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Terminal Type and Quantity2 PIN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5910-01-509-015289085-86 POSSIBLE MATCH
CAPACITOR,FIXED,ELECTROLYTIC
Possible match (shared part number)Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (drawings)
6532-01-687-232889085 POSSIBLE MATCH
GOWN,OPERATING,SURGICAL
Possible match (shared part number)Cardinal Health 200, Llc
Cross-Reference Index
Part NumberManufacturer
81D222P063KB2 United Chemi-Con Mfg Inc (USA)
89085-111 PRIMARY Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (drawings) (USA)
Reference documents
ReferenceMeaning
89085 D/9 Drawing number reference only
Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (drawings)
Related Parts
5910-01-509-0152POSSIBLE MATCH
CAPACITOR,FIXED,ELECTROLYTIC
89085-86
6532-01-687-2328POSSIBLE MATCH
GOWN,OPERATING,SURGICAL
89085

Frequently Asked Questions

What is NSN 5910-01-389-3761?

NSN 5910-01-389-3761 is a Capacitor,fixed,electrolytic, manufactured by Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (drawings), classified under FSC 5910, Capacitors. Status: active.

What part numbers are listed for NSN 5910-01-389-3761?

NSN 5910-01-389-3761 has 2 manufacturer part numbers on file: 81D222P063KB2 (United Chemi-Con Mfg Inc), 89085-111 (Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (drawings)).

What NSN replaces 5910-01-389-3761?

2 possible matches (shared part number, not a government interchangeability claim): 5910-01-509-0152, 6532-01-687-2328. Verify interchangeability with system specifications before substitution.

What are the specifications of 89085-111?

Key specifications for 89085-111: Body Diameter: 1.180 INCHES MINIMUM AND 1.219 INCHES MAXIMUM IN; Body Style: W/O MTG FACILITIES, TERMINAL(S) ON ONE END; Tolerance Range Per Section: -20.00 TO 20.00 PERCENT SINGLE SECTION; Nonderated Operating Temp: -40.0 CELSIUS MINIMUM AND 105.0 CELSIUS MAXIMUM DEGC. 19 specifications are documented in the U.S. Government catalog.

Is NSN 5910-01-389-3761 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com