The Capacitor,fixed,metallized,paper, cataloged under National Stock Number 5910-01-364-5191, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Electronic Concepts, Inc.. Government technical data includes 23 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-364-5191 |
| Primary Part Number | 09007-28F |
| Item Name | Capacitor,fixed,metallized,paper |
| FSC / FSG | 5910 / 59 — Capacitors |
| Manufacturer | Electronic Concepts, Inc. |
| Status | ACTIVE |
| Terminal Diameter | 0.019 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN |
| Body Style | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| Tolerance Range Per Section | -1.00 TO 1.00 PERCENT SINGLE SECTION |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC |
| Terminal Surface Treatment | SOLDER |
| Terminal Length | 1.250 INCHES MINIMUM IN |
| Body Width | 0.275 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN |
| Body Height | 0.085 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN |
| Reliability Failure Rate Level in Percent | 1.000 |
| Nonderated Continuous Voltage Rating and Type Per Section | 50.0 DC SINGLE SECTION |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Specification/standard Data | 81349-MIL-C-55514/8 GOVERNMENT SPECIFICATION |
| Body Length | 0.285 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN |
| Dissipation Factor at Reference Temp in Percent | 0.300 |
| Capacitance Value Per Section | 0.180 MICROFARADS SINGLE SECTION |
| Reliability Indicator | ESTABLISHED |
| Insulation Resistance at Maximum Operating Temp | 7000.0 MEGOHM-MICROFARADS |
| Dielectric Material | PLASTIC |
| Test Data Document | 81349-MIL-C-55514 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | PLASTIC CASE |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| Center to Center Distance Between Terminals Parallel to Length | 0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN |
| Insulation Resistance at Reference Temp | 500000.0 MEGOHMS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 09007-28F PRIMARY | Electronic Concepts, Inc. (USA) |
| Reference | Meaning |
|---|---|
| CFR16RRA184FM | 5/9 Secondary reference U.S. Government activity |
| MIL-PRF-55514/8 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| MIL-C-55514/8 | 5/9 Secondary reference U.S. Government activity |
NSN 5910-01-364-5191 is a Capacitor,fixed,metallized,paper, manufactured by Electronic Concepts, Inc., classified under FSC 5910, Capacitors. Status: active.
NSN 5910-01-364-5191 has 1 manufacturer part number on file: 09007-28F (Electronic Concepts, Inc.).
Key specifications for 09007-28F: Terminal Diameter: 0.019 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN; Body Style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE; Tolerance Range Per Section: -1.00 TO 1.00 PERCENT SINGLE SECTION; Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC. 23 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.