PartsTable TECHNICAL DATA SHEET
NSN 5910-01-363-6578Government record, cited

Capacitor, Fixed, Electrolytic5910-01-363-6578

NSN 5910-01-363-6578 · NIIN 013636578 · Part number ULB1J150M
Nichicon America Corp · FSC 5910 — Capacitors · FSG 59 — Electrical and Electronic Equipment Components · CAGE 55680
Government record, cited
NSN 5910-01-363-6578 — this item is cataloged by the U.S. Government under National Stock Number 5910-01-363-6578. Manufacturer of record part number: ULB1J150M.
Also searched as  5910-01-363-6578 · 5910013636578 · NIIN 013636578 · 01-363-6578 · FSC 5910 Capacitors · CAGE 55680 · ULB1J150M · 156CKR063M · AGR150M063 · 6-87156
Nearby stock numbers  ·
Features
  • Capacitor,fixed,electrolytic — FSC 5910
  • Body Diameter: 6.0 MILLIMETERS MAXIMUM MM
  • Terminal Diameter: 0.5 MILLIMETERS NOMINAL MM
  • Body Style: W/O MTG FACILITIES, TERMINAL(S) ON ONE END
  • Tolerance Range Per Section: -20.00 TO 20.00 PERCENT SINGLE SECTION
  • Nonderated Operating Temp: -40.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
  • Terminal Surface Treatment: SOLDER
  • Terminal Length: 24.0 MILLIMETERS MINIMUM MM
Identification
  • NSN: 5910-01-363-6578
  • NIIN: 013636578
  • FSC: 5910 — Capacitors
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: ULB1J150M
  • Manufacturer: Nichicon America Corp
General Description

The Capacitor,fixed,electrolytic, cataloged under National Stock Number 5910-01-363-6578, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Nichicon America Corp. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-01-363-6578
Primary Part NumberULB1J150M
Item NameCapacitor,fixed,electrolytic
FSC / FSG5910 / 59 — Capacitors
ManufacturerNichicon America Corp
StatusACTIVE
Body Diameter6.0 MILLIMETERS MAXIMUM MM
Terminal Diameter0.5 MILLIMETERS NOMINAL MM
Body StyleW/O MTG FACILITIES, TERMINAL(S) ON ONE END
Tolerance Range Per Section-20.00 TO 20.00 PERCENT SINGLE SECTION
Nonderated Operating Temp-40.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
Terminal Surface TreatmentSOLDER
Terminal Length24.0 MILLIMETERS MINIMUM MM
Electrical PolarizationPOLARIZED
Center to Center Distance Between Terminals Parallel to Diameter2.0 MILLIMETERS NOMINAL MM
Anode TypePLAIN FOIL
Nonderated Continuous Voltage Rating and Type Per Section63.0 DC SINGLE SECTION
Schematic Diagram DesignatorNO COMMON OR GROUNDED ELECTRODE(S)
Case Insulation MaterialPLASTIC
Impedance at Minimum Operating Temp in Ohms2.0
Body Length11.0 MILLIMETERS MAXIMUM MM
Dissipation Factor at Reference Temp in Percent0.090
Capacitance Value Per Section15.000 MICROFARADS SINGLE SECTION
Reliability IndicatorNOT ESTABLISHED
Capacitive Electrode MaterialALUMINUM
Terminal Type and Quantity2 UNINSULATED WIRE LEAD
DC Leakage at Reference Temp3.000 MICROAMPERES
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
ULB1J150M Nichicon America Corp (USA)
Reference documents
ReferenceMeaning
156CKR063M 3/9 Design control — primary reference
Illinois Capacitor Inc
AGR150M063 5/9 Secondary reference
Aerovox M
6-87156 C/1 Advisory reference — outside the item-of-supply concept
Vu-Data Corp

Frequently Asked Questions

What is NSN 5910-01-363-6578?

NSN 5910-01-363-6578 is a Capacitor,fixed,electrolytic, manufactured by Nichicon America Corp, classified under FSC 5910, Capacitors. Status: active.

What part numbers are listed for NSN 5910-01-363-6578?

NSN 5910-01-363-6578 has 1 manufacturer part number on file: ULB1J150M (Nichicon America Corp).

What are the specifications of ULB1J150M?

Key specifications for ULB1J150M: Body Diameter: 6.0 MILLIMETERS MAXIMUM MM; Terminal Diameter: 0.5 MILLIMETERS NOMINAL MM; Body Style: W/O MTG FACILITIES, TERMINAL(S) ON ONE END; Tolerance Range Per Section: -20.00 TO 20.00 PERCENT SINGLE SECTION. 21 specifications are documented in the U.S. Government catalog.

Is NSN 5910-01-363-6578 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com