The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-342-0720, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 11 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-342-0720 |
| Item Name | Capacitor,fixed,ceramic Dielectr |
| FSC / FSG | 5910 / 59 — Capacitors |
| Status | ACTIVE |
| Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius | 0.0 SINGLE SECTION |
| Body Style | CHIP TYPE |
| Tolerance Range Per Section | -5.00 TO 5.00 PERCENT SINGLE SECTION |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC |
| Terminal Surface Treatment | SOLDER |
| Terminal Length | 0.3 MILLIMETERS MINIMUM AND 0.7 MILLIMETERS MAXIMUM MM |
| Body Width | 1.4 MILLIMETERS MINIMUM AND 2.1 MILLIMETERS MAXIMUM MM |
| Body Height | 1.3 MILLIMETERS MAXIMUM MM |
| Reliability Failure Rate Level in Percent | 0.001 |
| Nonderated Continuous Voltage Rating and Type Per Section | 100.0 DC SINGLE SECTION |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Specification/standard Data | 81349-MIL-C-55681/8 GOVERNMENT SPECIFICATION |
| Body Length | 3.0 MILLIMETERS MINIMUM AND 4.0 MILLIMETERS MAXIMUM MM |
| Dissipation Factor at Reference Temp in Percent | 0.150 |
| Capacitance Value Per Section | 1000.000 PICOFARADS SINGLE SECTION |
| Reliability Indicator | ESTABLISHED |
| Insulation Resistance at Maximum Operating Temp | 1000.0 MEGOHMS |
| Test Data Document | 81349-MIL-C-55681 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | CERAMIC CASE |
| Terminal Type and Quantity | 2 BONDING PAD |
| Tolerance of Temp Coefficient Per Section in Ppm Per Deg Celsius | -30.0 TO 30.0 SINGLE SECTION |
| Insulation Resistance at Reference Temp | 100000.0 MEGOHMS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| CDR32BP102BKUR | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| 283-5185-00 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| CDR32BP102BJSS | 2/2 Government specification standardization U.S. Government activity |
| CDR32BP102BJWM | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| MIL-PRF-55681/8 | 4/1 Identification reference U.S. Government activity |
| GRM42-6X7R102K50 | C/1 Advisory reference — outside the item-of-supply concept Murata Erie North America Inc Headquarters and Georgia Opns |
| MIL-C-55681/8 | 5/9 Secondary reference U.S. Government activity |
| 214-990131-168 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| 12065C102KAT050B | C/1 Advisory reference — outside the item-of-supply concept Kyocera Avx Components Corporation |
| 0160-6100 | C/1 Advisory reference — outside the item-of-supply concept Keysight Technologies, Inc. |
| 747378 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
NSN 5910-01-342-0720 is a Capacitor,fixed,ceramic Dielectr, classified under FSC 5910, Capacitors. Status: active.
Key specifications for 5910-01-342-0720: Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius: 0.0 SINGLE SECTION; Body Style: CHIP TYPE; Tolerance Range Per Section: -5.00 TO 5.00 PERCENT SINGLE SECTION; Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC. 22 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.