PartsTable TECHNICAL DATA SHEET
NSN 5910-01-313-3233Government record, cited

Capacitor, Fixed, Plastic Dielectr5910-01-313-3233

NSN 5910-01-313-3233 · NIIN 013133233
FSC 5910 — Capacitors · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5910-01-313-3233 · 5910013133233 · NIIN 013133233 · 01-313-3233 · FSC 5910 Capacitors · MIL-C-55514-1 · CFR02AME474KM · 115059
Nearby stock numbers  ·
Features
  • Capacitor,fixed,plastic Dielectr — FSC 5910
  • Body Diameter: 0.516 INCHES NOMINAL IN
  • Terminal Diameter: 0.032 INCHES NOMINAL IN
  • Body Style: W/O MTG FACILITIES, AXIAL TERMINALS
  • Tolerance Range Per Section: -10.00 TO 10.00 PERCENT SINGLE SECTION
  • Nonderated Operating Temp: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
  • Terminal Surface Treatment: SOLDER
  • Terminal Length: 1.625 INCHES MINIMUM IN
Identification
  • NSN: 5910-01-313-3233
  • NIIN: 013133233
  • FSC: 5910 — Capacitors
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Capacitor,fixed,plastic Dielectr, cataloged under National Stock Number 5910-01-313-3233, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5910-01-313-3233
Item NameCapacitor,fixed,plastic Dielectr
FSC / FSG5910 / 59 — Capacitors
StatusACTIVE
Body Diameter0.516 INCHES NOMINAL IN
Terminal Diameter0.032 INCHES NOMINAL IN
Body StyleW/O MTG FACILITIES, AXIAL TERMINALS
Tolerance Range Per Section-10.00 TO 10.00 PERCENT SINGLE SECTION
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
Terminal Surface TreatmentSOLDER
Terminal Length1.625 INCHES MINIMUM IN
Reliability Failure Rate Level in Percent1.0000
Nonderated Continuous Voltage Rating and Type Per Section400.0 DC SINGLE SECTION
Schematic Diagram DesignatorNO COMMON OR GROUNDED ELECTRODE(S)
Specification/standard Data81349-MIL-C-55514-1 GOVERNMENT SPECIFICATION
Body Length1.562 INCHES NOMINAL IN
Dissipation Factor at Reference Temp in Percent0.5000
Capacitance Value Per Section0.470 MICROFARADS SINGLE SECTION
Reliability IndicatorESTABLISHED
Insulation Resistance at Maximum Operating Temp5000.0 MEGOHM-MICROFARADS
Dielectric MaterialPLASTIC POLYETHYLENE TEREPHTHALATE (PET)(POLYESTER)
Test Data Document81349-MIL-C-55514 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MaterialPLASTIC CASE
Terminal Type and Quantity2 UNINSULATED WIRE LEAD
Insulation Resistance at Reference Temp50000.0 MEGOHM-MICROFARADS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL B — Remove Demilitarization Key Points
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
MIL-C-55514-1 4/1 Identification reference
U.S. Government activity
CFR02AME474KM 2/2 Government specification standardization
U.S. Government activity
115059 5/9 Secondary reference
Scientific Radio Systems Inc

Frequently Asked Questions

What is NSN 5910-01-313-3233?

NSN 5910-01-313-3233 is a Capacitor,fixed,plastic Dielectr, classified under FSC 5910, Capacitors. Status: active.

What are the specifications of 5910-01-313-3233?

Key specifications for 5910-01-313-3233: Body Diameter: 0.516 INCHES NOMINAL IN; Terminal Diameter: 0.032 INCHES NOMINAL IN; Body Style: W/O MTG FACILITIES, AXIAL TERMINALS; Tolerance Range Per Section: -10.00 TO 10.00 PERCENT SINGLE SECTION. 21 specifications are documented in the U.S. Government catalog.

Is NSN 5910-01-313-3233 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 5910-01-313-3233?

NSN 5910-01-313-3233 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com