The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-307-2340, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Republic Electronics Corp S Inc. Government technical data includes 24 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 6 commercial cross-references from 4 manufacturers, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5910-01-307-2340 |
| Primary Part Number | DR20CB820F |
| Item Name | Capacitor,fixed,ceramic Dielectr |
| FSC / FSG | 5910 / 59 — No Item Name Available |
| Manufacturer | Republic Electronics Corp S Inc |
| Status | CANCELLED |
| Terminal Diameter | 0.023 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN |
| Test Data Document | 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Capacitance Value Per Section | 82.000 PICOFARADS SINGLE SECTION |
| Tolerance Range Per Section | -1.00 TO 1.00 PERCENT SINGLE SECTION |
| Nonderated Continuous Voltage Rating and Type Per Section | 200.0 DC SINGLE SECTION |
| Body Width | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN |
| Insulation Resistance at Maximum Operating Temp | 10000.0 MEGOHMS |
| Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius | 0.0 SINGLE SECTION |
| Tolerance of Temp Coefficient Per Section in Ppm Per Deg Celsius | -30.0 TO 30.0 SINGLE SECTION |
| Center to Center Distance Between Terminals Parallel to Length | 0.085 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN |
| Terminal Length | 1.250 INCHES MINIMUM IN |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| Specification/standard Data | 81349-MIL-C-20/35 GOVERNMENT SPECIFICATION |
| Body Height | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN |
| Body Length | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC |
| Material | PLASTIC CASE |
| Dissipation Factor at Reference Temp in Percent | 0.150 |
| Insulation Resistance at Reference Temp | 100000.0 MEGOHMS |
| Terminal Surface Treatment | SOLDER |
| Reliability Failure Rate Level in Percent | 0.001 |
| Reliability Indicator | ESTABLISHED |
| Body Style | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| DR20CB820F | Republic Electronics Corp S Inc (USA) |
| MIL-C-20/35 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| CCR09CG820FS | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 913-1117-420 | Rockwell Collins, Inc. Div Collins Aerospace - Mission Systems (USA) |
| 512350 | Fluke Corp (USA) |
| MIL-PRF-20/35 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5910-01-307-2340 is a Capacitor,fixed,ceramic Dielectr, manufactured by Republic Electronics Corp S Inc, classified under FSC 5910 (No Item Name Available). Status: cancelled.
NSN 5910-01-307-2340 has 6 cross-referenced part numbers: DR20CB820F (Republic Electronics Corp S Inc), MIL-C-20/35 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), CCR09CG820FS (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 913-1117-420 (Rockwell Collins, Inc. Div Collins Aerospace - Mission Systems), 512350 (Fluke Corp) and 1 more.
There are 2 known substitutes for 5910-01-307-2340: 4510-00-279-0496, 4010-01-432-1446. Verify interchangeability with system specifications before substitution.
Key specifications for DR20CB820F: Terminal Diameter: 0.023 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN; Test Data Document: 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Capacitance Value Per Section: 82.000 PICOFARADS SINGLE SECTION; Tolerance Range Per Section: -1.00 TO 1.00 PERCENT SINGLE SECTION. 24 total characteristics are documented in the Federal Logistics Information System.
NSN 5910-01-307-2340 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.